From: Neil Armstrong <[email protected]> commit 19f6fe976a61f9afc289b062b7ef67f99b72e7b9 upstream.
It has been reported on IRC and in KernelCI boot tests, this change breaks internal PHY support on the Amlogic G12A/SM1 Based boards. We suspect the added signal to reset more than the Ethernet MAC but also the MDIO/(RG)MII mux used to redirect the MAC signals to the internal PHY. This reverts commit f3362f0c18174a1f334a419ab7d567a36bd1b3f3 while we find and acceptable solution to cleanly reset the Ethernet MAC. Reported-by: Corentin Labbe <[email protected]> Acked-by: Jérôme Brunet <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> Signed-off-by: Kevin Hilman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> --- arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 2 -- arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 2 -- arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 3 --- 3 files changed, 7 deletions(-) --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -227,8 +227,6 @@ "timing-adjustment"; rx-fifo-depth = <4096>; tx-fifo-depth = <2048>; - resets = <&reset RESET_ETHERNET>; - reset-names = "stmmaceth"; status = "disabled"; }; --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi @@ -224,8 +224,6 @@ "timing-adjustment"; rx-fifo-depth = <4096>; tx-fifo-depth = <2048>; - resets = <&reset RESET_ETHERNET>; - reset-names = "stmmaceth"; status = "disabled"; mdio0: mdio { --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -13,7 +13,6 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/meson-gxbb-power.h> -#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h> #include <dt-bindings/thermal/thermal.h> / { @@ -576,8 +575,6 @@ interrupt-names = "macirq"; rx-fifo-depth = <4096>; tx-fifo-depth = <2048>; - resets = <&reset RESET_ETHERNET>; - reset-names = "stmmaceth"; power-domains = <&pwrc PWRC_GXBB_ETHERNET_MEM_ID>; status = "disabled"; };
