>
> [EXTERNAL EMAIL]
>
> Due to a HW limitation, the Latency Tolerance Reporting (LTR) value
> programmed in the Tiger Lake GBE controller is not large enough to allow
> the platform to enter Package C10, which in turn prevents the platform from
> achieving its low power target during suspend-to-idle. Ignore the GBE LTR
> value on Tiger Lake. LTR ignore functionality is currently performed solely
> by a debugfs write call. Split out the LTR code into its own function that
> can be called by both the debugfs writer and by this work around.
>
> Signed-off-by: David E. Box <david.e....@linux.intel.com>
> Reviewed-by: Sasha Neftin <sasha.nef...@intel.com>
> Cc: intel-wired-...@lists.osuosl.org
> ---
> drivers/platform/x86/intel_pmc_core.c | 55 ++++++++++++++++++++-------
> 1 file changed, 42 insertions(+), 13 deletions(-)
I feel like this driver change causes a weak reference between e1000e and
intel_pmc_core.
It would mean significantly different behavior if you use e1000e but don't have
PMC module
available for any reason.
In this case does it maybe make sense to at least use "imply" in the Kconfig
for e1000e so
that selecting e1000e gets intel-pmc-core enabled too?
>
> diff --git a/drivers/platform/x86/intel_pmc_core.c
> b/drivers/platform/x86/intel_pmc_core.c
> index ee2f757515b0..ab31eb646a1a 100644
> --- a/drivers/platform/x86/intel_pmc_core.c
> +++ b/drivers/platform/x86/intel_pmc_core.c
> @@ -863,34 +863,45 @@ static int pmc_core_pll_show(struct seq_file *s, void
> *unused)
> }
> DEFINE_SHOW_ATTRIBUTE(pmc_core_pll);
>
> -static ssize_t pmc_core_ltr_ignore_write(struct file *file,
> - const char __user *userbuf,
> - size_t count, loff_t *ppos)
> +static int pmc_core_write_ltr_ignore(u32 value)
> {
> struct pmc_dev *pmcdev = &pmc;
> const struct pmc_reg_map *map = pmcdev->map;
> - u32 val, buf_size, fd;
> - int err;
> -
> - buf_size = count < 64 ? count : 64;
> -
> - err = kstrtou32_from_user(userbuf, buf_size, 10, &val);
> - if (err)
> - return err;
> + u32 fd;
> + int err = 0;
>
> mutex_lock(&pmcdev->lock);
>
> - if (val > map->ltr_ignore_max) {
> + if (fls(value) > map->ltr_ignore_max) {
> err = -EINVAL;
> goto out_unlock;
> }
>
> fd = pmc_core_reg_read(pmcdev, map->ltr_ignore_offset);
> - fd |= (1U << val);
> + fd |= value;
> pmc_core_reg_write(pmcdev, map->ltr_ignore_offset, fd);
>
> out_unlock:
> mutex_unlock(&pmcdev->lock);
> +
> + return err;
> +}
> +
> +static ssize_t pmc_core_ltr_ignore_write(struct file *file,
> + const char __user *userbuf,
> + size_t count, loff_t *ppos)
> +{
> + u32 buf_size, val;
> + int err;
> +
> + buf_size = count < 64 ? count : 64;
> +
> + err = kstrtou32_from_user(userbuf, buf_size, 10, &val);
> + if (err)
> + return err;
> +
> + err = pmc_core_write_ltr_ignore(1U << val);
> +
> return err == 0 ? count : err;
> }
>
> @@ -1189,6 +1200,15 @@ static int quirk_xtal_ignore(const struct dmi_system_id
> *id)
> return 0;
> }
>
> +static int quirk_ltr_ignore(u32 val)
> +{
> + int err;
> +
> + err = pmc_core_write_ltr_ignore(val);
> +
> + return err;
> +}
> +
> static const struct dmi_system_id pmc_core_dmi_table[] = {
> {
> .callback = quirk_xtal_ignore,
> @@ -1244,6 +1264,15 @@ static int pmc_core_probe(struct platform_device *pdev)
> pmcdev->pmc_xram_read_bit = pmc_core_check_read_lock_bit();
> dmi_check_system(pmc_core_dmi_table);
>
> + /*
> + * On TGL, due to a hardware limitation, the GBE LTR blocks PC10 when
> + * a cable is attached. Tell the PMC to ignore it.
> + */
> + if (pmcdev->map == &tgl_reg_map) {
> + dev_dbg(&pdev->dev, "ignoring GBE LTR\n");
> + quirk_ltr_ignore(1U << 3);
> + }
> +
> pmc_core_dbgfs_register(pmcdev);
>
> device_initialized = true;
> --
> 2.25.1
