After applying the commit bbc4d71d6354
("net: phy: realtek: fix rtl8211e rx/tx delay config"), the configuration
register for TXDLY and RXDLY is set correctly.
Although PXs2 boards have RTL8211E for gigabit network PHY, it turrned out
that the phy-mode should be RGMII-ID mode. This changes 'phy-mode' property
to 'rgmii-id' as default.
Signed-off-by: Kunihiko Hayashi <hayashi.kunih...@socionext.com>
---
arch/arm/boot/dts/uniphier-pxs2.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi
b/arch/arm/boot/dts/uniphier-pxs2.dtsi
index 4d9f69a..5ba831e 100644
--- a/arch/arm/boot/dts/uniphier-pxs2.dtsi
+++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi
@@ -583,7 +583,7 @@
clocks = <&sys_clk 6>;
reset-names = "ether";
resets = <&sys_rst 6>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
local-mac-address = [00 00 00 00 00 00];
socionext,syscon-phy-mode = <&soc_glue 0>;
--
2.7.4
