On 3/10/21 5:20 PM, nicolas.fe...@microchip.com wrote:
> From: Nicolas Ferre <nicolas.fe...@microchip.com>
>
> Fix the whole mux-mask table according to datasheet for the sam9x60
> product. Too much functions for pins were disabled leading to
> misunderstandings when enabling more peripherals or taking this table
> as an example for another board.
> Take advantage of this fix to move the mux-mask in the SoC file where it
> belongs and use lower case letters for hex numbers like everywhere in
> the file.
>
> Signed-off-by: Nicolas Ferre <nicolas.fe...@microchip.com>
> Fixes: 1e5f532c2737 ("ARM: dts: at91: sam9x60: add device tree for soc and
> board")
> Cc: <sta...@vger.kernel.org> # 5.6+
> Cc: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikar...@microchip.com>
I went through all the pins described in DS60001579D, and I obtained
the same mux-mask values:
Reviewed-by: Tudor Ambarus <tudor.amba...@microchip.com>
> ---
> v1 -> v2:
> - move to SoC dtsi file: it applies to all boards using the sam9x60 SoC
> version
> - use lower case for hex numbers instead of mixed nonsense
>
> arch/arm/boot/dts/at91-sam9x60ek.dts | 8 --------
> arch/arm/boot/dts/sam9x60.dtsi | 9 +++++++++
> 2 files changed, 9 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts
> b/arch/arm/boot/dts/at91-sam9x60ek.dts
> index 4c40ae571154..775ceb3acb6c 100644
> --- a/arch/arm/boot/dts/at91-sam9x60ek.dts
> +++ b/arch/arm/boot/dts/at91-sam9x60ek.dts
> @@ -334,14 +334,6 @@ ethernet-phy@0 {
> };
>
> &pinctrl {
> - atmel,mux-mask = <
> - /* A B C */
> - 0xFFFFFEFF 0xC0E039FF 0xEF00019D /* pioA */
> - 0x03FFFFFF 0x02FC7E68 0x00780000 /* pioB */
> - 0xffffffff 0xF83FFFFF 0xB800F3FC /* pioC */
> - 0x003FFFFF 0x003F8000 0x00000000 /* pioD */
> - >;
> -
> adc {
> pinctrl_adc_default: adc_default {
> atmel,pins = <AT91_PIOB 15 AT91_PERIPH_A
> AT91_PINCTRL_NONE>;
> diff --git a/arch/arm/boot/dts/sam9x60.dtsi b/arch/arm/boot/dts/sam9x60.dtsi
> index 84066c1298df..ec45ced3cde6 100644
> --- a/arch/arm/boot/dts/sam9x60.dtsi
> +++ b/arch/arm/boot/dts/sam9x60.dtsi
> @@ -606,6 +606,15 @@ pinctrl: pinctrl@fffff400 {
> compatible = "microchip,sam9x60-pinctrl",
> "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
> ranges = <0xfffff400 0xfffff400 0x800>;
>
> + /* mux-mask corresponding to sam9x60 SoC in
> TFBGA228L package */
> + atmel,mux-mask = <
> + /* A B C
> */
> + 0xffffffff 0xffe03fff
> 0xef00019d /* pioA */
> + 0x03ffffff 0x02fc7e7f
> 0x00780000 /* pioB */
> + 0xffffffff 0xffffffff
> 0xf83fffff /* pioC */
> + 0x003fffff 0x003f8000
> 0x00000000 /* pioD */
> + >;
> +
> pioA: gpio@fffff400 {
> compatible = "microchip,sam9x60-gpio",
> "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
> reg = <0xfffff400 0x200>;
>
