bit-mask for pins 0 to 4 is BIT(0) to BIT(4) however we ended up with BIT(n - 1)
which is not right, and this was caught by below usban check
UBSAN: shift-out-of-bounds in drivers/gpio/gpio-wcd934x.c:34:14
Fixes: 59c324683400 ("gpio: wcd934x: Add support to wcd934x gpio controller")
Signed-off-by: Srinivas Kandagatla <srinivas.kandaga...@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevche...@gmail.com>
---
changes since v1:
- removed unnecessary dump stack from log
drivers/gpio/gpio-wcd934x.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpio/gpio-wcd934x.c b/drivers/gpio/gpio-wcd934x.c
index 1cbce5990855..97e6caedf1f3 100644
--- a/drivers/gpio/gpio-wcd934x.c
+++ b/drivers/gpio/gpio-wcd934x.c
@@ -7,7 +7,7 @@
#include <linux/slab.h>
#include <linux/of_device.h>
-#define WCD_PIN_MASK(p) BIT(p - 1)
+#define WCD_PIN_MASK(p) BIT(p)
#define WCD_REG_DIR_CTL_OFFSET 0x42
#define WCD_REG_VAL_CTL_OFFSET 0x43
#define WCD934X_NPINS 5
--
2.21.0
