On Wed 10 Mar 10:46 CST 2021, Souradeep Chowdhury wrote:
> The DCC is a DMA Engine designed to capture and store data
> during system crash or software triggers. The DCC operates
> based on link list entries which provides it with data and
> addresses and the function it needs to perform. These
> functions are read, write and loop. Added the basic driver
> in this patch which contains a probe method which instantiates
> the resources needed by the driver. DCC has it's own SRAM which
> needs to be instantiated at probe time as well.
>
So to summarize, the DCC will upon a crash copy the configured region
into the dcc-ram, where it can be retrieved either by dumping the memory
over USB or from sysfs on the next boot?
> Signed-off-by: Souradeep Chowdhury <schow...@codeaurora.org>
> ---
> drivers/soc/qcom/Kconfig | 8 +
> drivers/soc/qcom/Makefile | 1 +
> drivers/soc/qcom/dcc.c | 388
> ++++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 397 insertions(+)
> create mode 100644 drivers/soc/qcom/dcc.c
>
> diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
> index 79b568f..8819e0b 100644
> --- a/drivers/soc/qcom/Kconfig
> +++ b/drivers/soc/qcom/Kconfig
> @@ -69,6 +69,14 @@ config QCOM_LLCC
> SDM845. This provides interfaces to clients that use the LLCC.
> Say yes here to enable LLCC slice driver.
>
> +config QCOM_DCC
> + tristate "Qualcomm Technologies, Inc. Data Capture and Compare engine
> driver"
> + depends on ARCH_QCOM || COMPILE_TEST
> + help
> + This option enables driver for Data Capture and Compare engine. DCC
> + driver provides interface to configure DCC block and read back
> + captured data from DCC's internal SRAM.
> +
> config QCOM_KRYO_L2_ACCESSORS
> bool
> depends on ARCH_QCOM && ARM64 || COMPILE_TEST
> diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
> index ad675a6..1b00870 100644
> --- a/drivers/soc/qcom/Makefile
> +++ b/drivers/soc/qcom/Makefile
> @@ -26,3 +26,4 @@ obj-$(CONFIG_QCOM_LLCC) += llcc-qcom.o
> obj-$(CONFIG_QCOM_RPMHPD) += rpmhpd.o
> obj-$(CONFIG_QCOM_RPMPD) += rpmpd.o
> obj-$(CONFIG_QCOM_KRYO_L2_ACCESSORS) += kryo-l2-accessors.o
> +obj-$(CONFIG_QCOM_DCC) += dcc.o
> diff --git a/drivers/soc/qcom/dcc.c b/drivers/soc/qcom/dcc.c
> new file mode 100644
> index 0000000..89816bf
> --- /dev/null
> +++ b/drivers/soc/qcom/dcc.c
> @@ -0,0 +1,388 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2015-2021, The Linux Foundation. All rights reserved.
> + */
> +
> +#include <linux/bitfield.h>
> +#include <linux/bitops.h>
> +#include <linux/cdev.h>
> +#include <linux/delay.h>
> +#include <linux/fs.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +#include <linux/uaccess.h>
> +
> +#define dcc_readl(drvdata, off)
> \
> + readl(drvdata->base + dcc_offset_conv(drvdata, off))
This is only used in probe, please just inline it, and use (a) local
variable(s) to avoid the lengthy lines.
> +
> +/* DCC registers */
> +#define DCC_HW_INFO 0x04
> +#define DCC_LL_NUM_INFO 0x10
> +
> +#define DCC_MAP_LEVEL1 0x18
> +#define DCC_MAP_LEVEL2 0x34
> +#define DCC_MAP_LEVEL3 0x4C
> +
> +#define DCC_MAP_OFFSET1 0x10
> +#define DCC_MAP_OFFSET2 0x18
> +#define DCC_MAP_OFFSET3 0x1C
> +#define DCC_MAP_OFFSET4 0x8
> +
> +#define DCC_FIX_LOOP_OFFSET 16
> +#define DCC_VER_INFO_BIT 9
> +
> +#define DCC_MAX_LINK_LIST 8
> +#define DCC_INVALID_LINK_LIST GENMASK(7, 0)
> +
> +#define DCC_VER_MASK1 GENMASK(6, 0)
> +#define DCC_VER_MASK2 GENMASK(5, 0)
> +
> +#define DCC_RD_MOD_WR_ADDR 0xC105E
> +
> +struct qcom_dcc_config {
> + const int dcc_ram_offset;
> +};
> +
> +enum dcc_mem_map_ver {
> + DCC_MEM_MAP_VER1,
As these are just integers, I would suggest skipping them. If you really
like them I would like to see VER1 = 1, to make any future debugging
easier.
> + DCC_MEM_MAP_VER2,
> + DCC_MEM_MAP_VER3
> +};
> +
> +enum dcc_descriptor_type {
> + DCC_ADDR_TYPE,
> + DCC_LOOP_TYPE,
> + DCC_READ_WRITE_TYPE,
> + DCC_WRITE_TYPE
> +};
> +
> +struct dcc_config_entry {
> + u32 base;
> + u32 offset;
> + u32 len;
> + u32 index;
> + u32 loop_cnt;
> + u32 write_val;
> + u32 mask;
> + bool apb_bus;
> + enum dcc_descriptor_type desc_type;
> + struct list_head list;
> +};
> +
> +struct dcc_drvdata {
> + void __iomem *base;
> + u32 reg_size;
> + struct device *dev;
> + struct mutex mutex;
> + void __iomem *ram_base;
> + u32 ram_size;
> + u32 ram_offset;
> + enum dcc_mem_map_ver mem_map_ver;
> + u32 ram_cfg;
> + u32 ram_start;
> + bool *enable;
> + bool *configured;
> + bool interrupt_disable;
> + char *sram_node;
> + struct cdev sram_dev;
> + struct class *sram_class;
> + struct list_head *cfg_head;
> + u32 *nr_config;
> + u32 nr_link_list;
> + u8 curr_list;
> + u8 loopoff;
> +};
> +
> +static u32 dcc_offset_conv(struct dcc_drvdata *drvdata, u32 off)
I don't see a reason for specifying that the parameter and return value
are 32-bit unsigned ints, please use a generic data type...Like size_t
> +{
> + if (drvdata->mem_map_ver == DCC_MEM_MAP_VER1) {
> + if ((off & DCC_VER_MASK1) >= DCC_MAP_LEVEL3)
> + return (off - DCC_MAP_OFFSET3);
> + if ((off & DCC_VER_MASK1) >= DCC_MAP_LEVEL2)
> + return (off - DCC_MAP_OFFSET2);
> + else if ((off & DCC_VER_MASK1) >= DCC_MAP_LEVEL1)
> + return (off - DCC_MAP_OFFSET1);
> + } else if (drvdata->mem_map_ver == DCC_MEM_MAP_VER2) {
> + if ((off & DCC_VER_MASK1) >= DCC_MAP_LEVEL2)
> + return (off - DCC_MAP_OFFSET4);
> + }
> + return off;
> +}
> +
> +static void dcc_config_reset(struct dcc_drvdata *drvdata)
> +{
> + struct dcc_config_entry *entry, *temp;
> + int curr_list;
> +
> + mutex_lock(&drvdata->mutex);
> +
> + for (curr_list = 0; curr_list < drvdata->nr_link_list; curr_list++) {
> +
Unnecessary newline.
> + list_for_each_entry_safe(entry, temp,
> + &drvdata->cfg_head[curr_list], list) {
> + list_del(&entry->list);
> + devm_kfree(drvdata->dev, entry);
> + drvdata->nr_config[curr_list]--;
> + }
> + }
> + drvdata->ram_start = 0;
> + drvdata->ram_cfg = 0;
> + mutex_unlock(&drvdata->mutex);
> +}
> +
> +static int dcc_sram_open(struct inode *inode, struct file *file)
> +{
> + struct dcc_drvdata *drvdata = container_of(inode->i_cdev,
> + struct dcc_drvdata,
> + sram_dev);
> + file->private_data = drvdata;
> +
> + return 0;
> +}
> +
> +static ssize_t dcc_sram_read(struct file *file, char __user *data,
> + size_t len, loff_t *ppos)
> +{
> + unsigned char *buf;
> + struct dcc_drvdata *drvdata = file->private_data;
> +
> + /* EOF check */
> + if (drvdata->ram_size <= *ppos)
"Is ppos beyond the EOF" is better expressed as:
if (*ppos >= drvdata->ram_size)
> + return 0;
> +
> + if ((*ppos + len) > drvdata->ram_size)
> + len = (drvdata->ram_size - *ppos);
> +
> + buf = kzalloc(len, GFP_KERNEL);
> + if (!buf)
> + return -ENOMEM;
> +
> + memcpy_fromio(buf, (drvdata->ram_base + *ppos), len);
Parenthesis are unnecessary.
> +
> + if (copy_to_user(data, buf, len)) {
> + dev_err(drvdata->dev, "DCC: Couldn't copy all data to user\n");
> + kfree(buf);
> + return -EFAULT;
> + }
> +
> + *ppos += len;
> +
> + kfree(buf);
> +
> + return len;
> +}
> +
> +static const struct file_operations dcc_sram_fops = {
> + .owner = THIS_MODULE,
> + .open = dcc_sram_open,
> + .read = dcc_sram_read,
> + .llseek = no_llseek,
> +};
> +
> +static int dcc_sram_dev_register(struct dcc_drvdata *drvdata)
> +{
> + int ret;
> + struct device *device;
> + dev_t dev;
> +
> + ret = alloc_chrdev_region(&dev, 0, 1, drvdata->sram_node);
> + if (ret)
> + goto err_alloc;
> +
> + cdev_init(&drvdata->sram_dev, &dcc_sram_fops);
How about implementing this using pstore instead of exposing it through
a custom /dev/dcc_sram (if I read the code correclty)
> +
> + drvdata->sram_dev.owner = THIS_MODULE;
> + ret = cdev_add(&drvdata->sram_dev, dev, 1);
> + if (ret)
> + goto err_cdev_add;
> +
> + drvdata->sram_class = class_create(THIS_MODULE, drvdata->sram_node);
> + if (IS_ERR(drvdata->sram_class)) {
> + ret = PTR_ERR(drvdata->sram_class);
> + goto err_class_create;
> + }
> +
> + device = device_create(drvdata->sram_class, NULL,
> + drvdata->sram_dev.dev, drvdata,
> + drvdata->sram_node);
> + if (IS_ERR(device)) {
> + ret = PTR_ERR(device);
> + goto err_dev_create;
> + }
> +
> + return 0;
> +err_dev_create:
> + class_destroy(drvdata->sram_class);
> +err_class_create:
> + cdev_del(&drvdata->sram_dev);
> +err_cdev_add:
> + unregister_chrdev_region(drvdata->sram_dev.dev, 1);
> +err_alloc:
> + return ret;
> +}
> +
> +static void dcc_sram_dev_deregister(struct dcc_drvdata *drvdata)
> +{
> + device_destroy(drvdata->sram_class, drvdata->sram_dev.dev);
> + class_destroy(drvdata->sram_class);
> + cdev_del(&drvdata->sram_dev);
> + unregister_chrdev_region(drvdata->sram_dev.dev, 1);
> +}
> +
> +static int dcc_sram_dev_init(struct dcc_drvdata *drvdata)
> +{
> + int ret = 0;
> + size_t node_size;
> + char *node_name = "dcc_sram";
> + struct device *dev = drvdata->dev;
> +
> + node_size = strlen(node_name) + 1;
> +
> + drvdata->sram_node = devm_kzalloc(dev, node_size, GFP_KERNEL);
kzalloc + strlcpy can be replaced by kstrdup(), but that said...all this
does seems to be to copy a const string to the heap and lugging it
around. Use a define instead.
> + if (!drvdata->sram_node)
> + return -ENOMEM;
> +
> + strlcpy(drvdata->sram_node, node_name, node_size);
> + ret = dcc_sram_dev_register(drvdata);
> + if (ret)
> + dev_err(drvdata->dev, "DCC: sram node not registered.\n");
> +
> + return ret;
> +}
> +
> +static void dcc_sram_dev_exit(struct dcc_drvdata *drvdata)
> +{
> + dcc_sram_dev_deregister(drvdata);
> +}
> +
> +static int dcc_probe(struct platform_device *pdev)
> +{
> + int ret = 0, i;
> + struct device *dev = &pdev->dev;
> + struct dcc_drvdata *drvdata;
I think "dcc" would be a better name than "drvdata"...
> + struct resource *res;
> + const struct qcom_dcc_config *cfg;
> +
> + drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL);
> + if (!drvdata)
> + return -ENOMEM;
> +
> + drvdata->dev = &pdev->dev;
> + platform_set_drvdata(pdev, drvdata);
> +
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dcc-base");
platform_get_resource_byname() + devm_ioremap() is done in one go using
devm_platform_ioremap_resource_byname()
> + if (!res)
> + return -EINVAL;
> +
> + drvdata->reg_size = resource_size(res);
reg_size is unused outside this assignment, no need to lug it around in
drvdata.
> + drvdata->base = devm_ioremap(dev, res->start, resource_size(res));
drvdata->base is only accessed from this function, use a local variable
instead.
> + if (!drvdata->base)
> + return -ENOMEM;
> +
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> + "dcc-ram-base");
Here you're actually carrying the resource size, so it makes sense.
But it's okay not to wrap this line.
> + if (!res)
> + return -EINVAL;
> +
> + drvdata->ram_size = resource_size(res);
> + drvdata->ram_base = devm_ioremap(dev, res->start, resource_size(res));
> + if (!drvdata->ram_base)
> + return -ENOMEM;
> + cfg = of_device_get_match_data(&pdev->dev);
> + drvdata->ram_offset = cfg->dcc_ram_offset;
> +
> + if (FIELD_GET(BIT(DCC_VER_INFO_BIT), dcc_readl(drvdata, DCC_HW_INFO))) {
> + drvdata->mem_map_ver = DCC_MEM_MAP_VER3;
> + drvdata->nr_link_list = dcc_readl(drvdata, DCC_LL_NUM_INFO);
> + if (drvdata->nr_link_list == 0)
> + return -EINVAL;
Replace the \t in the middle
> + } else if ((dcc_readl(drvdata, DCC_HW_INFO) & DCC_VER_MASK2) ==
> DCC_VER_MASK2) {
> + drvdata->mem_map_ver = DCC_MEM_MAP_VER2;
> + drvdata->nr_link_list = dcc_readl(drvdata, DCC_LL_NUM_INFO);
> + if (drvdata->nr_link_list == 0)
> + return -EINVAL;
> + } else {
> + drvdata->mem_map_ver = DCC_MEM_MAP_VER1;
> + drvdata->nr_link_list = DCC_MAX_LINK_LIST;
> + }
> +
> + if ((dcc_readl(drvdata, DCC_HW_INFO) & BIT(6)) == BIT(6))
> + drvdata->loopoff = DCC_FIX_LOOP_OFFSET;
> + else
> + drvdata->loopoff = get_bitmask_order((drvdata->ram_size +
> + drvdata->ram_offset) / 4 - 1);
> + mutex_init(&drvdata->mutex);
> +
> + drvdata->enable = devm_kzalloc(dev, drvdata->nr_link_list *
> + sizeof(bool), GFP_KERNEL);
kzalloc(, items * sizeof(), ...) is kcalloc()
> + if (!drvdata->enable)
> + return -ENOMEM;
Add a newline between each check and the subsequent allocation, or do
all the allocation then do a
if (!dcc->enable || !dcc->configured ...)
return -ENOMEM;
> + drvdata->configured = devm_kzalloc(dev, drvdata->nr_link_list *
> + sizeof(bool), GFP_KERNEL);
> + if (!drvdata->configured)
> + return -ENOMEM;
> + drvdata->nr_config = devm_kzalloc(dev, drvdata->nr_link_list *
> + sizeof(u32), GFP_KERNEL);
> + if (!drvdata->nr_config)
> + return -ENOMEM;
> + drvdata->cfg_head = devm_kzalloc(dev, drvdata->nr_link_list *
> + sizeof(struct list_head), GFP_KERNEL);
> + if (!drvdata->cfg_head)
> + return -ENOMEM;
> +
> + for (i = 0; i < drvdata->nr_link_list; i++) {
> + INIT_LIST_HEAD(&drvdata->cfg_head[i]);
> + drvdata->nr_config[i] = 0;
kzalloc() already initialized nr_config.
> + }
> +
> + memset_io(drvdata->ram_base, 0, drvdata->ram_size);
> +
> + drvdata->curr_list = DCC_INVALID_LINK_LIST;
> +
> + ret = dcc_sram_dev_init(drvdata);
> + if (ret)
> + goto err;
> +
> + return ret;
We know ret is 0 here, but if you rename "err" to "out" and move it
above this line you can reuse return.
> +err:
> + return ret;
> +}
> +
> +static int dcc_remove(struct platform_device *pdev)
> +{
> + struct dcc_drvdata *drvdata = platform_get_drvdata(pdev);
> +
> + dcc_sram_dev_exit(drvdata);
> +
> + dcc_config_reset(drvdata);
> +
> + return 0;
> +}
> +
> +static const struct qcom_dcc_config sm8150_cfg = {
> + .dcc_ram_offset = 0x5000,
> +};
> +
> +static const struct of_device_id dcc_match_table[] = {
> + { .compatible = "qcom,sm8150-dcc", .data = &sm8150_cfg },
> +};
MODULE_DEVICE_TABLE(of, dcc_match_table);
> +
> +static struct platform_driver dcc_driver = {
> + .probe = dcc_probe,
The indentation here is excessive, feel free to use a single space.
> + .remove = dcc_remove,
> + .driver = {
> + .name = "msm-dcc",
We tend to not use "msm" anymore, so how about "qcom-dcc"?
PS. It's hard to comment on some of the things in this patch, as they
are not used until the next patch...
Regards,
Bjorn
> + .of_match_table = dcc_match_table,
> + },
> +};
> +
> +module_platform_driver(dcc_driver);
> +
> +MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("Qualcomm Technologies Inc. DCC driver");
> +
> --
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
>
