Change 'stanalone' to 'standalone'
Change 'mesaurement' to 'measurement'
Change 'nonvilatile' to 'nonvolatile'
Change 'unical' to 'unique'
Change 'unaccesable' to 'unaccessible'
Change 'correcpondent' to 'correspond'
Signed-off-by: Xiaofeng Cao <caoxiaof...@yulong.com>
---
drivers/power/supply/max1721x_battery.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/power/supply/max1721x_battery.c
b/drivers/power/supply/max1721x_battery.c
index 1b1a36f8e929..473e53cd2801 100644
--- a/drivers/power/supply/max1721x_battery.c
+++ b/drivers/power/supply/max1721x_battery.c
@@ -1,6 +1,6 @@
/*
* 1-Wire implementation for Maxim Semiconductor
- * MAX7211/MAX17215 stanalone fuel gauge chip
+ * MAX7211/MAX17215 standalone fuel gauge chip
*
* Copyright (C) 2017 Radioavionica Corporation
* Author: Alex A. Mihaylov <minimum...@rambler.ru>
@@ -28,7 +28,7 @@
/* Number of valid register addresses in W1 mode */
#define MAX1721X_MAX_REG_NR 0x1EF
-/* Factory settings (nonvilatile registers) (W1 specific) */
+/* Factory settings (nonvolatile registers) (W1 specific) */
#define MAX1721X_REG_NRSENSE 0x1CF /* RSense in 10^-5 Ohm */
/* Strings */
#define MAX1721X_REG_MFG_STR 0x1CC
@@ -105,7 +105,7 @@ static inline int max172xx_temperature_to_ps(unsigned int
reg)
/*
* Calculating current registers resolution:
*
- * RSense stored in 10^-5 Ohm, so mesaurment voltage must be
+ * RSense stored in 10^-5 Ohm, so measurement voltage must be
* in 10^-11 Volts for get current in uA.
* 16 bit current reg fullscale +/-51.2mV is 102400 uV.
* So: 102400 / 65535 * 10^5 = 156252
@@ -137,7 +137,7 @@ static int max1721x_battery_get_property(struct
power_supply *psy,
/*
* POWER_SUPPLY_PROP_PRESENT will always readable via
* sysfs interface. Value return 0 if battery not
- * present or unaccesable via W1.
+ * present or unaccessible via W1.
*/
val->intval =
regmap_read(info->regmap, MAX172XX_REG_STATUS,
@@ -334,9 +334,9 @@ static int devm_w1_max1721x_add_device(struct w1_slave *sl)
/*
* power_supply class battery name translated from W1 slave device
- * unical ID (look like 26-0123456789AB) to "max1721x-0123456789AB\0"
- * so, 26 (device family) correcpondent to max1721x devices.
- * Device name still unical for any numbers connected devices.
+ * unique ID (look like 26-0123456789AB) to "max1721x-0123456789AB\0"
+ * so, 26 (device family) correspond to max1721x devices.
+ * Device name still unique for any number of connected devices.
*/
snprintf(info->name, sizeof(info->name),
"max1721x-%012X", (unsigned int)sl->reg_num.id);
--
2.25.1
