On Monday 22 January 2001 16:11, Jens Axboe wrote:
>
> Stephen,
>
> To rule out other factors, could you try 2.4.1-pre8 with
> blk_started_io() and blk_finished_io() defined to nothing
> in include/linux/blkdev.h? This will disable the max-locked-buffers
> heuristic.
>
> Also, are the numbers above consistent for repeated runs (with
> boots in between)?
In the following table, 2.4.1-pre8x refers to -pre8 with
linux/include/linux/blkdev.h modified as suggested.
A diff to show the changes made is included at the end.
Here is a summary of the data, followed by the data
for the individual runs. Each of the four runs were performed
in rapid succession, with no boots in between.
Each run set had at least one boot in between.
This machine is dual 733mhz p-III, 255MB.
I didn't copy to lkml because this is rather lengthy,
but feel free to copy whatever you think is of general
interest.
Steven
2.4.1-pre4 run set 1 average: 9.77876 MB/sec
2.4.1-pre4 run set 2 average: 9.78904 MB/sec
2.4.1-pre8x run set 1 average: 9.56098 MB/sec
2.4.1-pre8x run set 2 average: 9.54694 MB/sec
2.4.1-pre8 run set 1 average: 9.25707 MB/sec
2.4.1-pre8 run set 2 average: 9.64841 MB/sec
2.4.1-pre4 (performed 18-January-2001)
average: 9.77876 MB/sec
Throughput 10.3677 MB/sec (NB=12.9597 MB/sec 103.677 MBit/sec)
Throughput 9.61291 MB/sec (NB=12.0161 MB/sec 96.1291 MBit/sec)
Throughput 9.92944 MB/sec (NB=12.4118 MB/sec 99.2944 MBit/sec)
Throughput 9.20502 MB/sec (NB=11.5063 MB/sec 92.0502 MBit/sec)
2.4.1-pre4 (performed 23-January-2001, repeat of above)
average: 9.78904 MB/sec
Throughput 10.1134 MB/sec (NB=12.6417 MB/sec 101.134 MBit/sec)
Throughput 9.71752 MB/sec (NB=12.1469 MB/sec 97.1752 MBit/sec)
Throughput 9.71035 MB/sec (NB=12.1379 MB/sec 97.1035 MBit/sec)
Throughput 9.6149 MB/sec (NB=12.0186 MB/sec 96.149 MBit/sec)
2.4.1-pre8x (performed 23-January-2001)
average: 9.56098 MB/sec
Throughput 9.98585 MB/sec (NB=12.4823 MB/sec 99.8585 MBit/sec)
Throughput 9.51678 MB/sec (NB=11.896 MB/sec 95.1678 MBit/sec)
Throughput 9.45918 MB/sec (NB=11.824 MB/sec 94.5918 MBit/sec)
Throughput 9.28211 MB/sec (NB=11.6026 MB/sec 92.8211 MBit/sec)
2.4.1-pre8x (performed 23-January-2001, repeat of above)
average: 9.54694 MB/sec
Throughput 9.59079 MB/sec (NB=11.9885 MB/sec 95.9079 MBit/sec)
Throughput 9.35774 MB/sec (NB=11.6972 MB/sec 93.5774 MBit/sec)
Throughput 9.60368 MB/sec (NB=12.0046 MB/sec 96.0368 MBit/sec)
Throughput 9.63557 MB/sec (NB=12.0445 MB/sec 96.3557 MBit/sec)
2.4.1-pre8: (performed 18-January-2001)
Average 9.25707 MB/sec
Throughput 8.93444 MB/sec (NB=11.1681 MB/sec 89.3444 MBit/sec)
Throughput 9.43609 MB/sec (NB=11.7951 MB/sec 94.3609 MBit/sec)
Throughput 9.5075 MB/sec (NB=11.8844 MB/sec 95.075 MBit/sec)
Throughput 9.15026 MB/sec (NB=11.4378 MB/sec 91.5026 MBit/sec)
2.4.1-pre8 (performed 23-January-2001, repeat of above)
average: 9.64841 MB/sec
Throughput 9.75834 MB/sec (NB=12.1979 MB/sec 97.5834 MBit/sec)
Throughput 9.70084 MB/sec (NB=12.1261 MB/sec 97.0084 MBit/sec)
Throughput 9.34317 MB/sec (NB=11.679 MB/sec 93.4317 MBit/sec)
Throughput 9.79128 MB/sec (NB=12.2391 MB/sec 97.9128 MBit/sec)
Here is the modification made to blkdev.h:
--- blkdev.h.orig Tue Jan 23 09:07:43 2001
+++ blkdev.h Tue Jan 23 09:08:32 2001
@@ -207,13 +207,7 @@
}
#define blk_finished_io(nsects) \
- atomic_sub(nsects, &queued_sectors); \
- if (atomic_read(&queued_sectors) < 0) { \
- printk("block: queued_sectors < 0\n"); \
- atomic_set(&queued_sectors, 0); \
- }
#define blk_started_io(nsects) \
- atomic_add(nsects, &queued_sectors);
#endif
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.tux.org/lkml/
