+static int rt5682_clk_enable(struct snd_pcm_substream *substream)
+{
+ int ret;
+ struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
+
+ /*
+ * Set wclk to 48000 because the rate constraint of this driver is
+ * 48000. ADAU7002 spec: "The ADAU7002 requires a BCLK rate that is
+ * minimum of 64x the LRCLK sample rate." RT5682 is the only clk
+ * source so for all codecs we have to limit bclk to 64X lrclk.
+ */
+ clk_set_rate(rt5682_dai_wclk, 48000);
+ clk_set_rate(rt5682_dai_bclk, 48000 * 64);
+ ret = clk_prepare_enable(rt5682_dai_bclk);
+ if (ret < 0) {
+ dev_err(rtd->dev, "can't enable master clock %d\n", ret);
+ return ret;
+ }
+ return ret;
+}
Out of curiosity, is there a reason why you use clk_prepare_enable() for
the bclk but not for the wclk?
