From: "michael.kao" <michael....@mediatek.com>
Add thermal zone node to Mediatek MT8183 dts file.
Evaluate the thermal zone every 500ms while not cooling
and every 100ms when passive cooling is performed.
Signed-off-by: Matthias Kaehlcke <m...@chromium.org>
Signed-off-by: Michael Kao <michael....@mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 85 ++++++++++++++++++++++++
1 file changed, 85 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 5b782a4769e7..d3550af06408 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -657,6 +657,87 @@
status = "disabled";
};
+ thermal: thermal@1100b000 {
+ #thermal-sensor-cells = <1>;
+ compatible = "mediatek,mt8183-thermal";
+ reg = <0 0x1100b000 0 0x1000>;
+ clocks = <&infracfg CLK_INFRA_THERM>,
+ <&infracfg CLK_INFRA_AUXADC>;
+ clock-names = "therm", "auxadc";
+ resets = <&infracfg MT8183_INFRACFG_AO_THERM_SW_RST>;
+ interrupts = <0 76 IRQ_TYPE_LEVEL_LOW>;
+ mediatek,auxadc = <&auxadc>;
+ mediatek,apmixedsys = <&apmixedsys>;
+ nvmem-cells = <&thermal_calibration>;
+ nvmem-cell-names = "calibration-data";
+ };
+
+ thermal-zones {
+ cpu_thermal: cpu_thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <500>;
+ thermal-sensors = <&thermal 0>;
+ sustainable-power = <5000>;
+ };
+
+ /* The tzts1 ~ tzts6 don't need to polling */
+ /* The tzts1 ~ tzts6 don't need to thermal throttle */
+
+ tzts1: tzts1 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&thermal 1>;
+ sustainable-power = <5000>;
+ trips {};
+ cooling-maps {};
+ };
+
+ tzts2: tzts2 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&thermal 2>;
+ sustainable-power = <5000>;
+ trips {};
+ cooling-maps {};
+ };
+
+ tzts3: tzts3 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&thermal 3>;
+ sustainable-power = <5000>;
+ trips {};
+ cooling-maps {};
+ };
+
+ tzts4: tzts4 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&thermal 4>;
+ sustainable-power = <5000>;
+ trips {};
+ cooling-maps {};
+ };
+
+ tzts5: tzts5 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&thermal 5>;
+ sustainable-power = <5000>;
+ trips {};
+ cooling-maps {};
+ };
+
+ tztsABB: tztsABB {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&thermal 6>;
+ sustainable-power = <5000>;
+ trips {};
+ cooling-maps {};
+ };
+ };
+
pwm0: pwm@1100e000 {
compatible = "mediatek,mt8183-disp-pwm";
reg = <0 0x1100e000 0 0x1000>;
@@ -926,6 +1007,10 @@
reg = <0 0x11f10000 0 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
+ thermal_calibration: calib@180 {
+ reg = <0x180 0xc>;
+ };
+
mipi_tx_calibration: calib@190 {
reg = <0x190 0xc>;
};
--
2.18.0
