Fixes the following W=1 kernel build warning(s):
drivers/scsi/mpt3sas/mpt3sas_scsih.c:763: warning: Function parameter or
member 'sas_address' not described in '__mpt3sas_get_sdev_by_addr'
drivers/scsi/mpt3sas/mpt3sas_scsih.c:763: warning: expecting prototype for
mpt3sas_get_sdev_by_addr(). Prototype was for __mpt3sas_get_sdev_by_addr()
instead
drivers/scsi/mpt3sas/mpt3sas_scsih.c:4535: warning: expecting prototype for
_scsih_check_for_pending_internal_cmds(). Prototype was for
mpt3sas_check_for_pending_internal_cmds() instead
drivers/scsi/mpt3sas/mpt3sas_scsih.c:6188: warning: Function parameter or
member 'port_entry' not described in '_scsih_look_and_get_matched_port_entry'
drivers/scsi/mpt3sas/mpt3sas_scsih.c:6188: warning: Function parameter or
member 'matched_port_entry' not described in
'_scsih_look_and_get_matched_port_entry'
drivers/scsi/mpt3sas/mpt3sas_scsih.c:6188: warning: Function parameter or
member 'count' not described in '_scsih_look_and_get_matched_port_entry'
drivers/scsi/mpt3sas/mpt3sas_scsih.c:6959: warning: Function parameter or
member 'port' not described in 'mpt3sas_expander_remove'
drivers/scsi/mpt3sas/mpt3sas_scsih.c:10494: warning: expecting prototype for
mpt3sas_scsih_reset_handler(). Prototype was for
mpt3sas_scsih_pre_reset_handler() instead
drivers/scsi/mpt3sas/mpt3sas_scsih.c:10536: warning: expecting prototype for
mpt3sas_scsih_reset_handler(). Prototype was for
mpt3sas_scsih_reset_done_handler() instead
drivers/scsi/mpt3sas/mpt3sas_scsih.c:12303: warning: expecting prototype for
scsih__ncq_prio_supp(). Prototype was for scsih_ncq_prio_supp() instead
Cc: Sathya Prakash <sathya.prak...@broadcom.com>
Cc: Sreekanth Reddy <sreekanth.re...@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subram...@broadcom.com>
Cc: "James E.J. Bottomley" <j...@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.peter...@oracle.com>
Cc: mpt-fusionlinux....@avagotech.com
Cc: mpt-fusionlinux....@broadcom.com
Cc: linux-s...@vger.kernel.org
Signed-off-by: Lee Jones <lee.jo...@linaro.org>
---
drivers/scsi/mpt3sas/mpt3sas_scsih.c | 18 ++++++++++--------
1 file changed, 10 insertions(+), 8 deletions(-)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index 945531e94d7e4..23ecf2750ec79 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -749,9 +749,10 @@ __mpt3sas_get_sdev_by_rphy(struct MPT3SAS_ADAPTER *ioc,
}
/**
- * mpt3sas_get_sdev_by_addr - get _sas_device object corresponding to provided
+ * __mpt3sas_get_sdev_by_addr - get _sas_device object corresponding to
provided
* sas address from sas_device_list list
* @ioc: per adapter object
+ * @sas_address: device sas address
* @port: port number
*
* Search for _sas_device object corresponding to provided sas address,
@@ -4518,7 +4519,7 @@ _scsih_issue_delayed_sas_io_unit_ctrl(struct
MPT3SAS_ADAPTER *ioc,
}
/**
- * _scsih_check_for_pending_internal_cmds - check for pending internal messages
+ * mpt3sas_check_for_pending_internal_cmds - check for pending internal
messages
* @ioc: per adapter object
* @smid: system request message index
*
@@ -6174,10 +6175,10 @@ enum hba_port_matched_codes {
* _scsih_look_and_get_matched_port_entry - Get matched hba port entry
* from HBA port table
* @ioc: per adapter object
- * @port_entry - hba port entry from temporary port table which needs to be
+ * @port_entry: hba port entry from temporary port table which needs to be
* searched for matched entry in the HBA port table
- * @matched_port_entry - save matched hba port entry here
- * @count - count of matched entries
+ * @matched_port_entry: save matched hba port entry here
+ * @count: count of matched entries
*
* return type of matched entry found.
*/
@@ -6952,6 +6953,7 @@ _scsih_expander_add(struct MPT3SAS_ADAPTER *ioc, u16
handle)
* mpt3sas_expander_remove - removing expander object
* @ioc: per adapter object
* @sas_address: expander sas_address
+ * @port: hba port entry
*/
void
mpt3sas_expander_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address,
@@ -10487,7 +10489,7 @@ _scsih_scan_for_devices_after_reset(struct
MPT3SAS_ADAPTER *ioc)
}
/**
- * mpt3sas_scsih_reset_handler - reset callback handler (for scsih)
+ * mpt3sas_scsih_pre_reset_handler - reset callback handler (for scsih)
* @ioc: per adapter object
*
* The handler for doing any required cleanup or initialization.
@@ -10528,7 +10530,7 @@ mpt3sas_scsih_clear_outstanding_scsi_tm_commands(struct
MPT3SAS_ADAPTER *ioc)
}
/**
- * mpt3sas_scsih_reset_handler - reset callback handler (for scsih)
+ * mpt3sas_scsih_reset_done_handler - reset callback handler (for scsih)
* @ioc: per adapter object
*
* The handler for doing any required cleanup or initialization.
@@ -12295,7 +12297,7 @@ scsih_pci_mmio_enabled(struct pci_dev *pdev)
}
/**
- * scsih__ncq_prio_supp - Check for NCQ command priority support
+ * scsih_ncq_prio_supp - Check for NCQ command priority support
* @sdev: scsi device struct
*
* This is called when a user indicates they would like to enable
--
2.27.0
