18.03.2021 12:12, Michał Mirosław пишет:
> On Wed, Mar 17, 2021 at 10:30:01PM +0300, Dmitry Osipenko wrote:
>> The refcounting of the gate clocks has a bug causing the enable_refcnt
>> to underflow when unused clocks are disabled. This happens because clk
>> provider erroneously bumps the refcount if clock is enabled at a boot
>> time, which it shouldn't be doing, and it does this only for the gate
>> clocks, while peripheral clocks are using the same gate ops and the
>> peripheral clocks are missing the initial bump. Hence the refcount of
>> the peripheral clocks is 0 when unused clocks are disabled and then the
>> counter is decremented further by the gate ops, causing the integer
>> underflow.
> [...]
>> diff --git a/drivers/clk/tegra/clk-periph-gate.c
>> b/drivers/clk/tegra/clk-periph-gate.c
>> index 4b31beefc9fc..3c4259fec82e 100644
>> --- a/drivers/clk/tegra/clk-periph-gate.c
>> +++ b/drivers/clk/tegra/clk-periph-gate.c
> [...]
>> @@ -91,21 +108,28 @@ static void clk_periph_disable(struct clk_hw *hw)
>>
>> spin_lock_irqsave(&periph_ref_lock, flags);
>>
>> - gate->enable_refcnt[gate->clk_num]--;
>> - if (gate->enable_refcnt[gate->clk_num] > 0) {
>> - spin_unlock_irqrestore(&periph_ref_lock, flags);
>> - return;
>> - }
>> + WARN_ON(!gate->enable_refcnt[gate->clk_num]);
>> +
>> + if (gate->enable_refcnt[gate->clk_num]-- == 1)
>> + clk_periph_disable_locked(hw);
>
> Nit: "if (--n == 0)" seems more natural, as you want to call
> clk_periph_disable_locked() when the refcount goes down to 0.
>
> [...]
>> /*
>> - * If peripheral is in the APB bus then read the APB bus to
>> - * flush the write operation in apb bus. This will avoid the
>> - * peripheral access after disabling clock
>> + * Some clocks are duplicated and some of them are marked as critical,
>> + * like fuse and fuse_burn for example, thus the enable_refcnt will
>> + * be non-zero here id the "unused" duplicate is disabled by CCF.
>
> s/id/if/ ?
I'll update this patch over the weekend, thanks!
