Using napi_alloc_skb in NAPI context avoids enable/disable IRQs, which
increases iperf3 result by a few Mbps. Since napi_alloc_skb() uses
NET_IP_ALIGN, convert other alloc methods to the same padding. Tested
on Intel Core2 and AMD K10 platforms.
Signed-off-by: Sieng Piaw Liew <liew.s.p...@gmail.com>
---
.../net/ethernet/atheros/atl1c/atl1c_main.c | 28 +++++++++++--------
1 file changed, 17 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
index 3f65f2b370c5..66325ba5b3a1 100644
--- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
+++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
@@ -47,7 +47,7 @@ static void atl1c_down(struct atl1c_adapter *adapter);
static int atl1c_reset_mac(struct atl1c_hw *hw);
static void atl1c_reset_dma_ring(struct atl1c_adapter *adapter);
static int atl1c_configure(struct atl1c_adapter *adapter);
-static int atl1c_alloc_rx_buffer(struct atl1c_adapter *adapter);
+static int atl1c_alloc_rx_buffer(struct atl1c_adapter *adapter, bool
napi_mode);
static const u32 atl1c_default_msg = NETIF_MSG_DRV | NETIF_MSG_PROBE |
@@ -470,7 +470,7 @@ static void atl1c_set_rxbufsize(struct atl1c_adapter
*adapter,
adapter->rx_buffer_len = mtu > AT_RX_BUF_SIZE ?
roundup(mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN, 8) :
AT_RX_BUF_SIZE;
- head_size = SKB_DATA_ALIGN(adapter->rx_buffer_len + NET_SKB_PAD) +
+ head_size = SKB_DATA_ALIGN(adapter->rx_buffer_len + NET_SKB_PAD +
NET_IP_ALIGN) +
SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
adapter->rx_frag_size = roundup_pow_of_two(head_size);
}
@@ -1434,7 +1434,7 @@ static int atl1c_configure(struct atl1c_adapter *adapter)
atl1c_set_multi(netdev);
atl1c_restore_vlan(adapter);
- num = atl1c_alloc_rx_buffer(adapter);
+ num = atl1c_alloc_rx_buffer(adapter, false);
if (unlikely(num == 0))
return -ENOMEM;
@@ -1650,14 +1650,20 @@ static inline void atl1c_rx_checksum(struct
atl1c_adapter *adapter,
skb_checksum_none_assert(skb);
}
-static struct sk_buff *atl1c_alloc_skb(struct atl1c_adapter *adapter)
+static struct sk_buff *atl1c_alloc_skb(struct atl1c_adapter *adapter,
+ bool napi_mode)
{
struct sk_buff *skb;
struct page *page;
- if (adapter->rx_frag_size > PAGE_SIZE)
- return netdev_alloc_skb(adapter->netdev,
- adapter->rx_buffer_len);
+ if (adapter->rx_frag_size > PAGE_SIZE) {
+ if (likely(napi_mode))
+ return napi_alloc_skb(&adapter->napi,
+ adapter->rx_buffer_len);
+ else
+ return netdev_alloc_skb_ip_align(adapter->netdev,
+
adapter->rx_buffer_len);
+ }
page = adapter->rx_page;
if (!page) {
@@ -1670,7 +1676,7 @@ static struct sk_buff *atl1c_alloc_skb(struct
atl1c_adapter *adapter)
skb = build_skb(page_address(page) + adapter->rx_page_offset,
adapter->rx_frag_size);
if (likely(skb)) {
- skb_reserve(skb, NET_SKB_PAD);
+ skb_reserve(skb, NET_SKB_PAD + NET_IP_ALIGN);
adapter->rx_page_offset += adapter->rx_frag_size;
if (adapter->rx_page_offset >= PAGE_SIZE)
adapter->rx_page = NULL;
@@ -1680,7 +1686,7 @@ static struct sk_buff *atl1c_alloc_skb(struct
atl1c_adapter *adapter)
return skb;
}
-static int atl1c_alloc_rx_buffer(struct atl1c_adapter *adapter)
+static int atl1c_alloc_rx_buffer(struct atl1c_adapter *adapter, bool napi_mode)
{
struct atl1c_rfd_ring *rfd_ring = &adapter->rfd_ring;
struct pci_dev *pdev = adapter->pdev;
@@ -1701,7 +1707,7 @@ static int atl1c_alloc_rx_buffer(struct atl1c_adapter
*adapter)
while (next_info->flags & ATL1C_BUFFER_FREE) {
rfd_desc = ATL1C_RFD_DESC(rfd_ring, rfd_next_to_use);
- skb = atl1c_alloc_skb(adapter);
+ skb = atl1c_alloc_skb(adapter, napi_mode);
if (unlikely(!skb)) {
if (netif_msg_rx_err(adapter))
dev_warn(&pdev->dev, "alloc rx buffer
failed\n");
@@ -1857,7 +1863,7 @@ static void atl1c_clean_rx_irq(struct atl1c_adapter
*adapter,
count++;
}
if (count)
- atl1c_alloc_rx_buffer(adapter);
+ atl1c_alloc_rx_buffer(adapter, true);
}
/**
--
2.17.1
