1. Remove CONFIG_HAVE_NET_DSA.
CONFIG_HAVE_NET_DSA is a legacy leftover from the times when drivers
should have selected CONFIG_NET_DSA manually.
Currently, all drivers has explicit 'depends on NET_DSA', so this is
no more needed.
2. CONFIG_HAVE_NET_DSA dependencies became CONFIG_NET_DSA's ones.
- dropped !S390 dependency which was introduced to be sure NET_DSA
can select CONFIG_PHYLIB. DSA migrated to Phylink almost 3 years
ago and the PHY library itself doesn't depend on !S390 since
commit 870a2b5e4fcd ("phylib: remove !S390 dependeny from Kconfig");
- INET dependency is kept to be sure we can select NET_SWITCHDEV;
- NETDEVICES dependency is kept to be sure we can select PHYLINK.
3. DSA drivers menu now depends on NET_DSA.
Instead on 'depends on NET_DSA' on every single driver, the entire
menu now depends on it. This eliminates a lot of duplicated lines
from Kconfig with no loss (when CONFIG_NET_DSA=m, drivers also can
be only m or n).
This also has a nice side effect that there's no more empty menu on
configurations without DSA.
4. Kbuild will now descend into 'drivers/net/dsa' only when
CONFIG_NET_DSA is y or m.
This is safe since no objects inside this folder can be built without
DSA core, as well as when CONFIG_NET_DSA=m, no objects can be
built-in.
Signed-off-by: Alexander Lobakin <aloba...@pm.me>
---
drivers/net/Makefile | 2 +-
drivers/net/dsa/Kconfig | 17 ++++-------------
net/dsa/Kconfig | 10 +++-------
3 files changed, 8 insertions(+), 21 deletions(-)
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index f4990ff32fa4..040e20b81317 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -45,7 +45,7 @@ obj-$(CONFIG_ARCNET) += arcnet/
obj-$(CONFIG_DEV_APPLETALK) += appletalk/
obj-$(CONFIG_CAIF) += caif/
obj-$(CONFIG_CAN) += can/
-obj-y += dsa/
+obj-$(CONFIG_NET_DSA) += dsa/
obj-$(CONFIG_ETHERNET) += ethernet/
obj-$(CONFIG_FDDI) += fddi/
obj-$(CONFIG_HIPPI) += hippi/
diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig
index 3af373e90806..a5f1aa911fe2 100644
--- a/drivers/net/dsa/Kconfig
+++ b/drivers/net/dsa/Kconfig
@@ -1,12 +1,12 @@
# SPDX-License-Identifier: GPL-2.0-only
menu "Distributed Switch Architecture drivers"
- depends on HAVE_NET_DSA
+ depends on NET_DSA
source "drivers/net/dsa/b53/Kconfig"
config NET_DSA_BCM_SF2
tristate "Broadcom Starfighter 2 Ethernet switch support"
- depends on HAS_IOMEM && NET_DSA
+ depends on HAS_IOMEM
select NET_DSA_TAG_BRCM
select FIXED_PHY
select BCM7XXX_PHY
@@ -18,7 +18,6 @@ config NET_DSA_BCM_SF2
config NET_DSA_LOOP
tristate "DSA mock-up Ethernet switch chip support"
- depends on NET_DSA
select FIXED_PHY
help
This enables support for a fake mock-up switch chip which
@@ -28,7 +27,7 @@ source "drivers/net/dsa/hirschmann/Kconfig"
config NET_DSA_LANTIQ_GSWIP
tristate "Lantiq / Intel GSWIP"
- depends on HAS_IOMEM && NET_DSA
+ depends on HAS_IOMEM
select NET_DSA_TAG_GSWIP
help
This enables support for the Lantiq / Intel GSWIP 2.1 found in
@@ -36,7 +35,6 @@ config NET_DSA_LANTIQ_GSWIP
config NET_DSA_MT7530
tristate "MediaTek MT753x and MT7621 Ethernet switch support"
- depends on NET_DSA
select NET_DSA_TAG_MTK
help
This enables support for the MediaTek MT7530, MT7531, and MT7621
@@ -44,7 +42,6 @@ config NET_DSA_MT7530
config NET_DSA_MV88E6060
tristate "Marvell 88E6060 ethernet switch chip support"
- depends on NET_DSA
select NET_DSA_TAG_TRAILER
help
This enables support for the Marvell 88E6060 ethernet switch
@@ -64,7 +61,6 @@ source "drivers/net/dsa/xrs700x/Kconfig"
config NET_DSA_QCA8K
tristate "Qualcomm Atheros QCA8K Ethernet switch family support"
- depends on NET_DSA
select NET_DSA_TAG_QCA
select REGMAP
help
@@ -73,7 +69,6 @@ config NET_DSA_QCA8K
config NET_DSA_REALTEK_SMI
tristate "Realtek SMI Ethernet switch family support"
- depends on NET_DSA
select NET_DSA_TAG_RTL4_A
select FIXED_PHY
select IRQ_DOMAIN
@@ -93,7 +88,7 @@ config NET_DSA_SMSC_LAN9303
config NET_DSA_SMSC_LAN9303_I2C
tristate "SMSC/Microchip LAN9303 3-ports 10/100 ethernet switch in I2C
managed mode"
- depends on NET_DSA && I2C
+ depends on I2C
select NET_DSA_SMSC_LAN9303
select REGMAP_I2C
help
@@ -102,7 +97,6 @@ config NET_DSA_SMSC_LAN9303_I2C
config NET_DSA_SMSC_LAN9303_MDIO
tristate "SMSC/Microchip LAN9303 3-ports 10/100 ethernet switch in MDIO
managed mode"
- depends on NET_DSA
select NET_DSA_SMSC_LAN9303
help
Enable access functions if the SMSC/Microchip LAN9303 is configured
@@ -110,7 +104,6 @@ config NET_DSA_SMSC_LAN9303_MDIO
config NET_DSA_VITESSE_VSC73XX
tristate
- depends on NET_DSA
select FIXED_PHY
select VITESSE_PHY
select GPIOLIB
@@ -120,7 +113,6 @@ config NET_DSA_VITESSE_VSC73XX
config NET_DSA_VITESSE_VSC73XX_SPI
tristate "Vitesse VSC7385/7388/7395/7398 SPI mode support"
- depends on NET_DSA
depends on SPI
select NET_DSA_VITESSE_VSC73XX
help
@@ -129,7 +121,6 @@ config NET_DSA_VITESSE_VSC73XX_SPI
config NET_DSA_VITESSE_VSC73XX_PLATFORM
tristate "Vitesse VSC7385/7388/7395/7398 Platform mode support"
- depends on NET_DSA
depends on HAS_IOMEM
select NET_DSA_VITESSE_VSC73XX
help
diff --git a/net/dsa/Kconfig b/net/dsa/Kconfig
index aaf8a452fd5b..8746b07668ae 100644
--- a/net/dsa/Kconfig
+++ b/net/dsa/Kconfig
@@ -1,15 +1,10 @@
# SPDX-License-Identifier: GPL-2.0-only
-config HAVE_NET_DSA
- def_bool y
- depends on INET && NETDEVICES && !S390
-
-# Drivers must select NET_DSA and the appropriate tagging format
menuconfig NET_DSA
tristate "Distributed Switch Architecture"
- depends on HAVE_NET_DSA
depends on BRIDGE || BRIDGE=n
depends on HSR || HSR=n
+ depends on INET && NETDEVICES
select GRO_CELLS
select NET_SWITCHDEV
select PHYLINK
@@ -20,7 +15,8 @@ menuconfig NET_DSA
if NET_DSA
-# tagging formats
+# Drivers must select the appropriate tagging format(s)
+
config NET_DSA_TAG_8021Q
tristate
select VLAN_8021Q
--
2.31.0
