Add a vops to configure VCC voltage VCC voltage level
for platform supporting both ufs2.x and ufs 3.x devices.

Suggested-by: Stanley Chu <stanley....@mediatek.com>
Suggested-by: Asutosh Das <asuto...@codeaurora.org>
Suggested-by: Bjorn Andersson <bjorn.anders...@linaro.org>
Signed-off-by: Nitin Rawat <nitir...@codeaurora.org>
Signed-off-by: Veerabhadrarao Badiganti <vbadi...@codeaurora.org>
---
 drivers/scsi/ufs/ufshcd.c |  4 ++++
 drivers/scsi/ufs/ufshcd.h | 10 ++++++++++
 2 files changed, 14 insertions(+)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 633ca8e..5bfe987 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -7763,6 +7763,10 @@ static int ufshcd_add_lus(struct ufs_hba *hba)
                goto out;

        ufshcd_clear_ua_wluns(hba);
+       if (ufshcd_vops_setup_vcc_regulators(hba))
+               dev_err(hba->dev,
+                       "%s: Failed to set the VCC regulator values, continue 
with 2.7v\n",
+                       __func__);

        /* Initialize devfreq after UFS device is detected */
        if (ufshcd_is_clkscaling_supported(hba)) {
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 0db796a..8f0945d 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -324,6 +324,7 @@ struct ufs_pwr_mode_info {
  * @device_reset: called to issue a reset pulse on the UFS device
  * @program_key: program or evict an inline encryption key
  * @event_notify: called to notify important events
+ * @setup_vcc_regulators : update vcc regulator level
  */
 struct ufs_hba_variant_ops {
        const char *name;
@@ -360,6 +361,7 @@ struct ufs_hba_variant_ops {
                               const union ufs_crypto_cfg_entry *cfg, int slot);
        void    (*event_notify)(struct ufs_hba *hba,
                                enum ufs_event_type evt, void *data);
+       int    (*setup_vcc_regulators)(struct ufs_hba *hba);
 };

 /* clock gating state  */
@@ -1269,6 +1271,14 @@ static inline void 
ufshcd_vops_config_scaling_param(struct ufs_hba *hba,
                hba->vops->config_scaling_param(hba, profile, data);
 }

+static inline int ufshcd_vops_setup_vcc_regulators(struct ufs_hba *hba)
+{
+       if (hba->vops && hba->vops->setup_vcc_regulators)
+               return hba->vops->setup_vcc_regulators(hba);
+
+       return 0;
+}
+
 extern struct ufs_pm_lvl_states ufs_pm_lvl_states[];

 /*
--
2.7.4

Reply via email to