Hello!
On 22.03.2021 6:13, Chunfeng Yun wrote:
Add support ip-sleep wakeup for MT8183, it's similar to MT8173,
^ for
and it's also a specific one, but not follow IPM rule.
Following?
Due to the index 2 already used by many DTS, it's better to keep
it unchanged for backward compatible, treat specific ones without
Compatibility.
following IPM rule as revision 1.x, meanwhile reserve 3~10 for
later revision that follows the IPM rule.
Signed-off-by: Chunfeng Yun <chunfeng....@mediatek.com>
---
drivers/usb/host/xhci-mtk.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
index 09f2ddbfe8b9..8ba1f914cb75 100644
--- a/drivers/usb/host/xhci-mtk.c
+++ b/drivers/usb/host/xhci-mtk.c
@@ -57,12 +57,19 @@
#define CTRL_U2_FORCE_PLL_STB BIT(28)
/* usb remote wakeup registers in syscon */
+
/* mt8173 etc */
#define PERI_WK_CTRL1 0x4
#define WC1_IS_C(x) (((x) & 0xf) << 26) /* cycle debounce */
#define WC1_IS_EN BIT(25)
#define WC1_IS_P BIT(6) /* polarity for ip sleep */
+/* mt8183 */
+#define PERI_WK_CTRL0 0x0
+#define WC0_IS_C(x) (((x) & 0xf) << 28) /* cycle debounce */
+#define WC0_IS_P BIT(12) /* polarity */
+#define WC0_IS_EN BIT(6)
+
/* mt2712 etc */
#define PERI_SSUSB_SPM_CTRL 0x0
#define SSC_IP_SLEEP_EN BIT(4)
@@ -71,6 +78,7 @@
enum ssusb_uwk_vers {
SSUSB_UWK_V1 = 1,
SSUSB_UWK_V2,
+ SSUSB_UWK_V11 = 11, /* specific revision 1.1 */
SSUSB_UWK_V1_1, maybe?
[...]
MBR, Sergei
