On 09:14-20210319, Aswath Govindraju wrote:
> The following speed modes are now supported in J7200 SoC,
> - HS200 and HS400 modes at 1.8 V card voltage, in MMCSD0 subsystem [1].
> - UHS-I speed modes in MMCSD1 subsystem [1].
>
> Add support for UHS-I modes by adding voltage regulator device tree nodes
> and corresponding pinmux details, to power cycle and voltage switch cards.
> Set respective tags in sdhci0 and remove no-1-8-v tag from sdhci1
> device tree nodes.
>
> Also update the delay values for various speed modes supported, based on
> the revised january 2021 J7200 datasheet[2].
>
> [1] - section 12.3.6.1.1 MMCSD Features, in
> https://www.ti.com/lit/ug/spruiu1a/spruiu1a.pdf,
> (SPRUIU1A – JULY 2020 – REVISED JANUARY 2021)
>
> [2] - https://www.ti.com/lit/ds/symlink/dra821u.pdf,
> (SPRSP57B – APRIL 2020 – REVISED JANUARY 2021)
>
> Signed-off-by: Aswath Govindraju <a-govindr...@ti.com>
> ---
[...]
> +
> + vdd_sd_dv_pins_default: vdd_sd_dv_pins_default {
Nope. Use:
vdd_sd_dv_pins_default: vdd-sd-dv-pins-default
--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5
849D 1736 249D
