From: Wesley Cheng <wch...@codeaurora.org>
commit f09ddcfcb8c569675066337adac2ac205113471f upstream.
In the situations where the DWC3 gadget stops active transfers, once
calling the dwc3_gadget_giveback(), there is a chance where a function
driver can queue a new USB request in between the time where the dwc3
lock has been released and re-aquired. This occurs after we've already
issued an ENDXFER command. When the stop active transfers continues
to remove USB requests from all dep lists, the newly added request will
also be removed, while controller still has an active TRB for it.
This can lead to the controller accessing an unmapped memory address.
Fix this by ensuring parameters to prevent EP queuing are set before
calling the stop active transfers API.
Fixes: ae7e86108b12 ("usb: dwc3: Stop active transfers before halting the
controller")
Signed-off-by: Wesley Cheng <wch...@codeaurora.org>
Link:
https://lore.kernel.org/r/1615507142-23097-1-git-send-email-wch...@codeaurora.org
Cc: stable <sta...@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gre...@linuxfoundation.org>
---
drivers/usb/dwc3/gadget.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -783,8 +783,6 @@ static int __dwc3_gadget_ep_disable(stru
trace_dwc3_gadget_ep_disable(dep);
- dwc3_remove_requests(dwc, dep);
-
/* make sure HW endpoint isn't stalled */
if (dep->flags & DWC3_EP_STALL)
__dwc3_gadget_ep_set_halt(dep, 0, false);
@@ -803,6 +801,8 @@ static int __dwc3_gadget_ep_disable(stru
dep->endpoint.desc = NULL;
}
+ dwc3_remove_requests(dwc, dep);
+
return 0;
}
@@ -1617,7 +1617,7 @@ static int __dwc3_gadget_ep_queue(struct
{
struct dwc3 *dwc = dep->dwc;
- if (!dep->endpoint.desc || !dwc->pullups_connected) {
+ if (!dep->endpoint.desc || !dwc->pullups_connected || !dwc->connected) {
dev_err(dwc->dev, "%s: can't queue to disabled endpoint\n",
dep->name);
return -ESHUTDOWN;
@@ -2150,6 +2150,7 @@ static int dwc3_gadget_pullup(struct usb
if (!is_on) {
u32 count;
+ dwc->connected = false;
/*
* In the Synopsis DesignWare Cores USB3 Databook Rev. 3.30a
* Section 4.1.8 Table 4-7, it states that for a
device-initiated
@@ -2174,7 +2175,6 @@ static int dwc3_gadget_pullup(struct usb
dwc->ev_buf->lpos = (dwc->ev_buf->lpos + count) %
dwc->ev_buf->length;
}
- dwc->connected = false;
} else {
__dwc3_gadget_start(dwc);
}
@@ -3267,8 +3267,6 @@ static void dwc3_gadget_reset_interrupt(
{
u32 reg;
- dwc->connected = true;
-
/*
* WORKAROUND: DWC3 revisions <1.88a have an issue which
* would cause a missing Disconnect Event if there's a
@@ -3308,6 +3306,7 @@ static void dwc3_gadget_reset_interrupt(
* transfers."
*/
dwc3_stop_active_transfers(dwc);
+ dwc->connected = true;
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
reg &= ~DWC3_DCTL_TSTCTRL_MASK;
