From: Fabrice Gasnier <fabrice.gasn...@foss.st.com>
commit b14d72ac731753708a7c1a6b3657b9312b6f0042 upstream.
Ceiling value may be miss-aligned with what's actually configured into the
ARR register. This is seen after probe as currently the ARR value is zero,
whereas ceiling value is set to the maximum. So:
- reading ceiling reports zero
- in case the counter gets enabled without any prior configuration,
it won't count.
- in case the function gets set by the user 1st, (priv->ceiling) is used.
Fix it by getting rid of the cached "priv->ceiling" variable. Rather use
the ARR register value directly by using regmap read or write when needed.
There should be no drawback on performance as priv->ceiling isn't used in
performance critical path.
There's also no point in writing ARR while setting function (sms), so
it can be safely removed.
Fixes: ad29937e206f ("counter: Add STM32 Timer quadrature encoder")
Suggested-by: William Breathitt Gray <vilhelm.g...@gmail.com>
Signed-off-by: Fabrice Gasnier <fabrice.gasn...@foss.st.com>
Acked-by: William Breathitt Gray <vilhelm.g...@gmail.com>
Cc: <sta...@vger.kernel.org>
Link:
https://lore.kernel.org/r/1614793789-10346-1-git-send-email-fabrice.gasn...@foss.st.com
Signed-off-by: Jonathan Cameron <jonathan.came...@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gre...@linuxfoundation.org>
---
drivers/counter/stm32-timer-cnt.c | 11 +++--------
1 file changed, 3 insertions(+), 8 deletions(-)
--- a/drivers/counter/stm32-timer-cnt.c
+++ b/drivers/counter/stm32-timer-cnt.c
@@ -31,7 +31,6 @@ struct stm32_timer_cnt {
struct counter_device counter;
struct regmap *regmap;
struct clk *clk;
- u32 ceiling;
u32 max_arr;
bool enabled;
struct stm32_timer_regs bak;
@@ -75,8 +74,10 @@ static int stm32_count_write(struct coun
const unsigned long val)
{
struct stm32_timer_cnt *const priv = counter->priv;
+ u32 ceiling;
- if (val > priv->ceiling)
+ regmap_read(priv->regmap, TIM_ARR, &ceiling);
+ if (val > ceiling)
return -EINVAL;
return regmap_write(priv->regmap, TIM_CNT, val);
@@ -138,10 +139,6 @@ static int stm32_count_function_set(stru
regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN, 0);
- /* TIMx_ARR register shouldn't be buffered (ARPE=0) */
- regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_ARPE, 0);
- regmap_write(priv->regmap, TIM_ARR, priv->ceiling);
-
regmap_update_bits(priv->regmap, TIM_SMCR, TIM_SMCR_SMS, sms);
/* Make sure that registers are updated */
@@ -199,7 +196,6 @@ static ssize_t stm32_count_ceiling_write
regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_ARPE, 0);
regmap_write(priv->regmap, TIM_ARR, ceiling);
- priv->ceiling = ceiling;
return len;
}
@@ -374,7 +370,6 @@ static int stm32_timer_cnt_probe(struct
priv->regmap = ddata->regmap;
priv->clk = ddata->clk;
- priv->ceiling = ddata->max_arr;
priv->max_arr = ddata->max_arr;
priv->counter.name = dev_name(dev);
