On 16/03/21 12:00AM, Pratyush Yadav wrote: > +Cc mtd list > > Hi, > > On 15/03/21 05:45PM, Kuldeep Singh wrote: > > Convert the Freescale DSPI binding to DT schema format using json-schema. > > > > Signed-off-by: Kuldeep Singh <[email protected]> > > --- > > Hi Rob, > > This patch is checked with following commands with no warnings observed. > > make distclean; make allmodconfig; > > make dt_binding_check > > DT_SCHEMA_FILES=Documentation/devicetree/bindings/spi/fsl,spi-fsl-dspi.yaml; > > make dtbs_check > > DT_SCHEMA_FILES=Documentation/devicetree/bindings/spi/fsl,spi-fsl-dspi.yaml > > When I add the "fsl,spi-cs-sck-delay" property under the flash@0 node in > the example and run dt_binding_check, I see the below error: > > > /home/pratyush/src/linux/Documentation/devicetree/bindings/spi/fsl,spi-fsl-dspi.example.dt.yaml: > flash@0: 'fsl,spi-cs-sck-delay' does not match any of the regexes: > '^partition@', 'pinctrl-[0-9]+' > From schema: > /home/pratyush/src/lin/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml > > I am trying to solve a similar problem for the Cadence QSPI controller > binding and I wonder what the best solution for this is. The obvious one > would be to add these properties to jedec,spi-nor.yaml. I haven't > managed to come up with any other solution to this problem. > > Rob, all, any suggestions on how to best model this?
Ping. Any ideas? -- Regards, Pratyush Yadav Texas Instruments Inc.
