1st line of commit should be ARM: dts: bcm2711
On 2021-03-22 11:58 a.m., Nicolas Saenz Julienne wrote:
> From: Nicolas Saenz Julienne <nsaenzjulie...@suse.de>
>
> Force emmc2's frequency to 150MHz as the default 100MHz (set by FW)
> seems to interfere with the VPU clock when setup at frequencies bigger
> than 500MHz (a pretty common case). This ends up causing unwarranted
> SDHCI CMD hangs when no SD card is present.
>
> Signed-off-by: Nicolas Saenz Julienne <nsa...@kernel.org>
> ---
> arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
> b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
> index 3b4ab947492a..9aa8408d9960 100644
> --- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
> +++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
> @@ -257,6 +257,12 @@ &emmc2 {
> vqmmc-supply = <&sd_io_1v8_reg>;
> vmmc-supply = <&sd_vcc_reg>;
> broken-cd;
> + /*
> + * Force the frequency to 150MHz as the default 100MHz seems to
> + * interfere with the VPU clock when setup at frequencies bigger than
> + * 500MHz, causing unwarranted CMD hangs.
> + */
> + clock-frequency = <150000000>;
> status = "okay";
> };
>
> 
smime.p7s
Description: S/MIME Cryptographic Signature
