The warning message did not printed the LCD pixel clock rate but the LCD
clock divisor input rate. As a consequence, the required and real pixel
clock rates are now passed to the tilcdc_pclk_diff().

Signed-off-by: Dario Binacchi <dario...@libero.it>

---

Changes in v3:
- Replace calculated with requested in the warning message.
- Swap the positions of the real_pclk_rate, and pclk_rate parameters
  in the warning message.

Changes in v2:
- The patch has been added in version 2.

 drivers/gpu/drm/tilcdc/tilcdc_crtc.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c 
b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c
index ac6228cb04d9..381a706ab7c2 100644
--- a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c
+++ b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c
@@ -203,7 +203,7 @@ static void tilcdc_crtc_set_clk(struct drm_crtc *crtc)
        struct drm_device *dev = crtc->dev;
        struct tilcdc_drm_private *priv = dev->dev_private;
        struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
-       unsigned long clk_rate, real_rate, real_pclk_rate, pclk_rate;
+       unsigned long clk_rate, real_pclk_rate, pclk_rate;
        unsigned int clkdiv;
        int ret;
 
@@ -239,12 +239,12 @@ static void tilcdc_crtc_set_clk(struct drm_crtc *crtc)
                 * 5% is an arbitrary value - LCDs are usually quite tolerant
                 * about pixel clock rates.
                 */
-               real_rate = clkdiv * pclk_rate;
+               real_pclk_rate = clk_rate / clkdiv;
 
-               if (tilcdc_pclk_diff(clk_rate, real_rate) > 5) {
+               if (tilcdc_pclk_diff(pclk_rate, real_pclk_rate) > 5) {
                        dev_warn(dev->dev,
-                                "effective pixel clock rate (%luHz) differs 
from the calculated rate (%luHz)\n",
-                                clk_rate, real_rate);
+                                "effective pixel clock rate (%luHz) differs 
from the requested rate (%luHz)\n",
+                                real_pclk_rate, pclk_rate);
                }
        }
 
-- 
2.17.1

Reply via email to