On Fri 2021-03-05 11:52:38, Johan Hovold wrote:
> On Fri, Mar 05, 2021 at 11:46:35AM +0100, Pavel Machek wrote:
> > Hi!
> >
> > > > > For motorola modem case, we may have a GNSS device on channel 4.
> > > > > Let's add that to the binding and example.
> > > > >
> > > > > Signed-off-by: Tony Lindgren <t...@atomide.com>
> > > > > ---
> > > > > .../devicetree/bindings/serdev/serdev-ngsm.yaml | 9
> > > > > +++++++++
> > > > > 1 file changed, 9 insertions(+)
> >
> > >
> > > And since we're describing a mux, I think you need nodes for the virtual
> > > ports rather than a reg property in what should be a serial client. That
> > > is something like
> > >
> > > serial@nnn {
> > > modem {
> > > compatible = "etsi,ts27001-mux";
> > >
> > > serial@4 {
> > > compatible = "etsi,ts27001-serial";
> > > reg = <4>;
> > >
> > > gnss {
> > > compatible = "motorola,motmdm-gnss";
> > > };
> > > };
> > > };
> > > };
> > >
> > > This way you can actually use serdev for the client drivers (e.g. for
> > > gnss), and those drivers also be used for non-muxed ports if needed
> > > (e.g. over USB).
> >
> > I have done changes you requested, and then hit "serdev is busy
> > because it can have at most one child" limit in the code. You have
> > pretty clean driver in your inbox, and no reply. No help with serdev
> > core limitations, either. Can you start to communicate?
>
> It's on my list, but time is limited.
Everyone's time is limited. Do you have any time estimates?
Pavel
--
http://www.livejournal.com/~pavelmachek
signature.asc
Description: Digital signature
