From: Mohammad Athari Bin Ismail <mohammad.athari.ism...@intel.com>

In this patch, "net: stmmac: support FPE link partner hand-shaking
procedure", priv->plat->fpe_cfg wouldn`t be "devm_kzalloc"ed if
dma_cap->frpsel is 0 (Flexible Rx Parser is not supported in SoC) in
tc_init(). So, fpe_cfg will be remain as NULL and accessing it will cause
kernel panic.

To fix this, move the "devm_kzalloc"ing of priv->plat->fpe_cfg before
dma_cap->frpsel checking in tc_init(). Additionally, checking of
priv->dma_cap.fpesel is added before calling stmmac_fpe_link_state_handle()
as only FPE supported SoC is allowed to call the function.

Below is the kernel panic dump reported by Marek Szyprowski
<m.szyprow...@samsung.com>:

meson8b-dwmac ff3f0000.ethernet eth0: PHY [0.0:00] driver [RTL8211F Gigabit 
Ethernet] (irq=35)
meson8b-dwmac ff3f0000.ethernet eth0: No Safety Features support found
meson8b-dwmac ff3f0000.ethernet eth0: PTP not supported by HW
meson8b-dwmac ff3f0000.ethernet eth0: configuring for phy/rgmii link mode
Unable to handle kernel NULL pointer dereference at virtual address 
0000000000000001
Mem abort info:
...
user pgtable: 4k pages, 48-bit VAs, pgdp=00000000044eb000
[0000000000000001] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 96000004 [#1] PREEMPT SMP
Modules linked in: dw_hdmi_i2s_audio dw_hdmi_cec meson_gxl realtek 
meson_gxbb_wdt snd_soc_meson_axg_sound_card dwmac_generic axg_audio 
meson_dw_hdmi crct10dif_ce snd_soc_meson_card_utils snd_soc_meson_axg_tdmout 
panfrost rc_odroid gpu_sched reset_meson_audio_arb meson_ir 
snd_soc_meson_g12a_tohdmitx snd_soc_meson_axg_frddr sclk_div clk_phase 
snd_soc_meson_codec_glue dwmac_meson8b snd_soc_meson_axg_fifo stmmac_platform 
meson_rng meson_drm stmmac rtc_meson_vrtc rng_core meson_canvas pwm_meson 
dw_hdmi mdio_mux_meson_g12a pcs_xpcs snd_soc_meson_axg_tdm_interface 
snd_soc_meson_axg_tdm_formatter nvmem_meson_efuse display_connector
CPU: 1 PID: 7 Comm: kworker/u8:0 Not tainted 5.12.0-rc4-next-20210325+
Hardware name: Hardkernel ODROID-C4 (DT)
Workqueue: events_power_efficient phylink_resolve
pstate: 20400009 (nzCv daif +PAN -UAO -TCO BTYPE=--)
pc : stmmac_mac_link_up+0x14c/0x348 [stmmac]
lr : stmmac_mac_link_up+0x284/0x348 [stmmac] ...
Call trace:
 stmmac_mac_link_up+0x14c/0x348 [stmmac]
 phylink_resolve+0x104/0x420
 process_one_work+0x2a8/0x718
 worker_thread+0x48/0x460
 kthread+0x134/0x160
 ret_from_fork+0x10/0x18
Code: b971ba60 350007c0 f958c260 f9402000 (39400401)
---[ end trace 0c9deb6c510228aa ]---

Fixes: 5a5586112b92 ("net: stmmac: support FPE link partner hand-shaking
procedure")
Reported-by: Marek Szyprowski <m.szyprow...@samsung.com>
Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ism...@intel.com>
---
 .../net/ethernet/stmicro/stmmac/stmmac_main.c |  6 ++++--
 .../net/ethernet/stmicro/stmmac/stmmac_tc.c   | 20 +++++++++----------
 2 files changed, 14 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c 
b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 170296820af0..27faf5e49360 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -997,7 +997,8 @@ static void stmmac_mac_link_down(struct phylink_config 
*config,
        stmmac_eee_init(priv);
        stmmac_set_eee_pls(priv, priv->hw, false);
 
-       stmmac_fpe_link_state_handle(priv, false);
+       if (priv->dma_cap.fpesel)
+               stmmac_fpe_link_state_handle(priv, false);
 }
 
 static void stmmac_mac_link_up(struct phylink_config *config,
@@ -1097,7 +1098,8 @@ static void stmmac_mac_link_up(struct phylink_config 
*config,
                stmmac_set_eee_pls(priv, priv->hw, true);
        }
 
-       stmmac_fpe_link_state_handle(priv, true);
+       if (priv->dma_cap.fpesel)
+               stmmac_fpe_link_state_handle(priv, true);
 }
 
 static const struct phylink_mac_ops stmmac_phylink_mac_ops = {
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c 
b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
index 1d84ee359808..4e70efc45458 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
@@ -254,6 +254,16 @@ static int tc_init(struct stmmac_priv *priv)
                         priv->flow_entries_max);
        }
 
+       if (!priv->plat->fpe_cfg) {
+               priv->plat->fpe_cfg = devm_kzalloc(priv->device,
+                                                  sizeof(*priv->plat->fpe_cfg),
+                                                  GFP_KERNEL);
+               if (!priv->plat->fpe_cfg)
+                       return -ENOMEM;
+       } else {
+               memset(priv->plat->fpe_cfg, 0, sizeof(*priv->plat->fpe_cfg));
+       }
+
        /* Fail silently as we can still use remaining features, e.g. CBS */
        if (!dma_cap->frpsel)
                return 0;
@@ -298,16 +308,6 @@ static int tc_init(struct stmmac_priv *priv)
        dev_info(priv->device, "Enabling HW TC (entries=%d, max_off=%d)\n",
                        priv->tc_entries_max, priv->tc_off_max);
 
-       if (!priv->plat->fpe_cfg) {
-               priv->plat->fpe_cfg = devm_kzalloc(priv->device,
-                                                  sizeof(*priv->plat->fpe_cfg),
-                                                  GFP_KERNEL);
-               if (!priv->plat->fpe_cfg)
-                       return -ENOMEM;
-       } else {
-               memset(priv->plat->fpe_cfg, 0, sizeof(*priv->plat->fpe_cfg));
-       }
-
        return 0;
 }
 
-- 
2.17.1

Reply via email to