On Wed, Mar 24, 2021 at 12:57:32AM +0530, Sandeep Maheswaram wrote: > This patch adds a shutdown callback to USB DWC core driver to ensure that > it is properly shutdown in reboot/shutdown path. This is required > where SMMU address translation is enabled like on SC7180 > SoC and few others. If the hardware is still accessing memory after > SMMU translation is disabled as part of SMMU shutdown callback in > system reboot or shutdown path, then IOVAs(I/O virtual address) > which it was using will go on the bus as the physical addresses which > might result in unknown crashes (NoC/interconnect errors). > > Previously this was added in dwc3 qcom glue driver. > https://patchwork.kernel.org/project/linux-arm-msm/list/?series=382449 > But observed kernel panic as glue driver shutdown getting called after > iommu shutdown. As we are adding iommu nodes in dwc core node > in device tree adding shutdown callback in core driver seems correct.
So shouldn't you also remove this from the qcom glue driver at the same time? Please submit both as a patch series. thanks, greg k-h
