From: Angelo Dureghello <ang...@kernel-space.org> [ Upstream commit 47c5e474bc1e1061fb037d13b5000b38967eb070 ]
For cases when flexcan is built-in, bitrate is still not set at registering. So flexcan_chip_freeze() generates: [ 1.860000] *** ZERO DIVIDE *** FORMAT=4 [ 1.860000] Current process id is 1 [ 1.860000] BAD KERNEL TRAP: 00000000 [ 1.860000] PC: [<402e70c8>] flexcan_chip_freeze+0x1a/0xa8 To allow chip freeze, using an hardcoded timeout when bitrate is still not set. Fixes: ec15e27cc890 ("can: flexcan: enable RX FIFO after FRZ/HALT valid") Link: https://lore.kernel.org/r/20210315231510.650593-1-ang...@kernel-space.org Signed-off-by: Angelo Dureghello <ang...@kernel-space.org> [mkl: use if instead of ? operator] Signed-off-by: Marc Kleine-Budde <m...@pengutronix.de> Signed-off-by: Sasha Levin <sas...@kernel.org> --- drivers/net/can/flexcan.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index cb6bc2058542..d4dfa0247ebb 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -422,9 +422,15 @@ static int flexcan_chip_disable(struct flexcan_priv *priv) static int flexcan_chip_freeze(struct flexcan_priv *priv) { struct flexcan_regs __iomem *regs = priv->regs; - unsigned int timeout = 1000 * 1000 * 10 / priv->can.bittiming.bitrate; + unsigned int timeout; + u32 bitrate = priv->can.bittiming.bitrate; u32 reg; + if (bitrate) + timeout = 1000 * 1000 * 10 / bitrate; + else + timeout = FLEXCAN_TIMEOUT_US / 10; + reg = priv->read(®s->mcr); reg |= FLEXCAN_MCR_FRZ | FLEXCAN_MCR_HALT; priv->write(reg, ®s->mcr); -- 2.30.1