[PATCH 5.10 186/221] net: phy: broadcom: Avoid forward for bcm54xx_config_clock_delay()

[Greg Kroah-Hartman]

From: Florian Fainelli <f.faine...@gmail.com>

[ Upstream commit 133bf7b4fbbe58cff5492e37e95e75c88161f1b8 ]

Avoid a forward declaration by moving the callers of
bcm54xx_config_clock_delay() below its body.

Signed-off-by: Florian Fainelli <f.faine...@gmail.com>
Reviewed-by: Vladimir Oltean <olte...@gmail.com>
Signed-off-by: David S. Miller <da...@davemloft.net>
Signed-off-by: Sasha Levin <sas...@kernel.org>
---
 drivers/net/phy/broadcom.c | 74 +++++++++++++++++++-------------------
 1 file changed, 36 insertions(+), 38 deletions(-)

diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index 739efcce6dd5..88e9708e0562 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -26,44 +26,6 @@ MODULE_DESCRIPTION("Broadcom PHY driver");
 MODULE_AUTHOR("Maciej W. Rozycki");
 MODULE_LICENSE("GPL");
 
-static int bcm54xx_config_clock_delay(struct phy_device *phydev);
-
-static int bcm54210e_config_init(struct phy_device *phydev)
-{
-       int val;
-
-       bcm54xx_config_clock_delay(phydev);
-
-       if (phydev->dev_flags & PHY_BRCM_EN_MASTER_MODE) {
-               val = phy_read(phydev, MII_CTRL1000);
-               val |= CTL1000_AS_MASTER | CTL1000_ENABLE_MASTER;
-               phy_write(phydev, MII_CTRL1000, val);
-       }
-
-       return 0;
-}
-
-static int bcm54612e_config_init(struct phy_device *phydev)
-{
-       int reg;
-
-       bcm54xx_config_clock_delay(phydev);
-
-       /* Enable CLK125 MUX on LED4 if ref clock is enabled. */
-       if (!(phydev->dev_flags & PHY_BRCM_RX_REFCLK_UNUSED)) {
-               int err;
-
-               reg = bcm_phy_read_exp(phydev, BCM54612E_EXP_SPARE0);
-               err = bcm_phy_write_exp(phydev, BCM54612E_EXP_SPARE0,
-                                       BCM54612E_LED4_CLK125OUT_EN | reg);
-
-               if (err < 0)
-                       return err;
-       }
-
-       return 0;
-}
-
 static int bcm54xx_config_clock_delay(struct phy_device *phydev)
 {
        int rc, val;
@@ -105,6 +67,42 @@ static int bcm54xx_config_clock_delay(struct phy_device 
*phydev)
        return 0;
 }
 
+static int bcm54210e_config_init(struct phy_device *phydev)
+{
+       int val;
+
+       bcm54xx_config_clock_delay(phydev);
+
+       if (phydev->dev_flags & PHY_BRCM_EN_MASTER_MODE) {
+               val = phy_read(phydev, MII_CTRL1000);
+               val |= CTL1000_AS_MASTER | CTL1000_ENABLE_MASTER;
+               phy_write(phydev, MII_CTRL1000, val);
+       }
+
+       return 0;
+}
+
+static int bcm54612e_config_init(struct phy_device *phydev)
+{
+       int reg;
+
+       bcm54xx_config_clock_delay(phydev);
+
+       /* Enable CLK125 MUX on LED4 if ref clock is enabled. */
+       if (!(phydev->dev_flags & PHY_BRCM_RX_REFCLK_UNUSED)) {
+               int err;
+
+               reg = bcm_phy_read_exp(phydev, BCM54612E_EXP_SPARE0);
+               err = bcm_phy_write_exp(phydev, BCM54612E_EXP_SPARE0,
+                                       BCM54612E_LED4_CLK125OUT_EN | reg);
+
+               if (err < 0)
+                       return err;
+       }
+
+       return 0;
+}
+
 /* Needs SMDSP clock enabled via bcm54xx_phydsp_config() */
 static int bcm50610_a0_workaround(struct phy_device *phydev)
 {
-- 
2.30.1