Use generic regamp ramp-delay helper function instead of implementing own.
Signed-off-by: Matti Vaittinen <matti.vaitti...@fi.rohmeurope.com>
---
Changes since v4:
- new patch
drivers/regulator/bd71815-regulator.c | 37 +++++----------------------
1 file changed, 6 insertions(+), 31 deletions(-)
diff --git a/drivers/regulator/bd71815-regulator.c
b/drivers/regulator/bd71815-regulator.c
index b1448e34c629..00bab1307c14 100644
--- a/drivers/regulator/bd71815-regulator.c
+++ b/drivers/regulator/bd71815-regulator.c
@@ -264,36 +264,7 @@ static int buck12_set_hw_dvs_levels(struct device_node *np,
* 10: 2.50mV/usec 10mV 4uS
* 11: 1.25mV/usec 10mV 8uS
*/
-static int bd7181x_buck12_set_ramp_delay(struct regulator_dev *rdev,
- int ramp_delay)
-{
- struct bd71815_pmic *pmic = rdev_get_drvdata(rdev);
- int id = rdev->desc->id;
- unsigned int ramp_value = BD71815_BUCK_RAMPRATE_10P00MV;
-
- switch (ramp_delay) {
- case 1 ... 1250:
- ramp_value = BD71815_BUCK_RAMPRATE_1P25MV;
- break;
- case 1251 ... 2500:
- ramp_value = BD71815_BUCK_RAMPRATE_2P50MV;
- break;
- case 2501 ... 5000:
- ramp_value = BD71815_BUCK_RAMPRATE_5P00MV;
- break;
- case 5001 ... 10000:
- ramp_value = BD71815_BUCK_RAMPRATE_10P00MV;
- break;
- default:
- ramp_value = BD71815_BUCK_RAMPRATE_10P00MV;
- dev_err(pmic->dev,
- "%s: ramp_delay: %d not supported, setting
10000mV//us\n",
- rdev->desc->name, ramp_delay);
- }
-
- return regmap_update_bits(pmic->regmap, BD71815_REG_BUCK1_MODE + id*0x1,
- BD71815_BUCK_RAMPRATE_MASK, ramp_value << 6);
-}
+static const unsigned int bd7181x_ramp_table[] = { 1250, 2500, 5000, 10000 };
static int bd7181x_led_set_current_limit(struct regulator_dev *rdev,
int min_uA, int max_uA)
@@ -429,7 +400,7 @@ static const struct regulator_ops
bd7181x_buck12_regulator_ops = {
.set_voltage_sel = bd7181x_buck12_set_voltage_sel,
.get_voltage_sel = bd7181x_buck12_get_voltage_sel,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
- .set_ramp_delay = bd7181x_buck12_set_ramp_delay,
+ .set_ramp_delay = regulator_set_ramp_delay_regmap,
};
static const struct regulator_ops bd7181x_led_regulator_ops = {
@@ -499,6 +470,10 @@ static const struct regulator_ops
bd7181x_led_regulator_ops = {
.vsel_mask = 0x3f, \
.enable_reg = (ereg), \
.enable_mask = 0x04, \
+ .ramp_reg = (ereg), \
+ .ramp_mask = BD71815_BUCK_RAMPRATE_MASK, \
+ .ramp_delay_table = bd7181x_ramp_table, \
+ .n_ramp_values = ARRAY_SIZE(bd7181x_ramp_table),\
.of_parse_cb = buck12_set_hw_dvs_levels, \
}, \
.dvs = (_dvs), \
--
2.25.4
--
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND
~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]
