Pali Rohár <p...@kernel.org> writes: > It was observed that the workaround introduced by commit 61c40f35f5cd > ("clk: mvebu: armada-37xx-periph: Fix switching CPU rate from 300Mhz to > 1.2GHz") when base CPU frequency is 1.2 GHz is also required when base > CPU frequency is 1 GHz. Otherwise switching CPU frequency directly from > L2 (250 MHz) to L0 (1 GHz) causes a crash. > > When base CPU frequency is just 800 MHz no crashed were observed during > switch from L2 to L0. > > Signed-off-by: Pali Rohár <p...@kernel.org> > Acked-by: Stephen Boyd <sb...@kernel.org> > Tested-by: Tomasz Maciej Nowak <tmn...@gmail.com> > Tested-by: Anders Trier Olesen <anders.trier.ole...@gmail.com> > Tested-by: Philip Soares <phil...@netisense.com> > Fixes: 2089dc33ea0e ("clk: mvebu: armada-37xx-periph: add DVFS support for > cpu clocks") > Cc: sta...@vger.kernel.org # 61c40f35f5cd ("clk: mvebu: armada-37xx-periph: > Fix switching CPU rate from 300Mhz to 1.2GHz")
Acked-by: Gregory CLEMENT <gregory.clem...@bootlin.com> Thanks, Gregory > --- > drivers/clk/mvebu/armada-37xx-periph.c | 12 +++++++----- > 1 file changed, 7 insertions(+), 5 deletions(-) > > diff --git a/drivers/clk/mvebu/armada-37xx-periph.c > b/drivers/clk/mvebu/armada-37xx-periph.c > index 6507bd2c5f31..b15e177bea7e 100644 > --- a/drivers/clk/mvebu/armada-37xx-periph.c > +++ b/drivers/clk/mvebu/armada-37xx-periph.c > @@ -487,8 +487,10 @@ static long clk_pm_cpu_round_rate(struct clk_hw *hw, > unsigned long rate, > } > > /* > - * Switching the CPU from the L2 or L3 frequencies (300 and 200 Mhz > - * respectively) to L0 frequency (1.2 Ghz) requires a significant > + * Workaround when base CPU frequnecy is 1000 or 1200 MHz > + * > + * Switching the CPU from the L2 or L3 frequencies (250/300 or 200 MHz > + * respectively) to L0 frequency (1/1.2 GHz) requires a significant > * amount of time to let VDD stabilize to the appropriate > * voltage. This amount of time is large enough that it cannot be > * covered by the hardware countdown register. Due to this, the CPU > @@ -498,15 +500,15 @@ static long clk_pm_cpu_round_rate(struct clk_hw *hw, > unsigned long rate, > * To work around this problem, we prevent switching directly from the > * L2/L3 frequencies to the L0 frequency, and instead switch to the L1 > * frequency in-between. The sequence therefore becomes: > - * 1. First switch from L2/L3(200/300MHz) to L1(600MHZ) > + * 1. First switch from L2/L3 (200/250/300 MHz) to L1 (500/600 MHz) > * 2. Sleep 20ms for stabling VDD voltage > - * 3. Then switch from L1(600MHZ) to L0(1200Mhz). > + * 3. Then switch from L1 (500/600 MHz) to L0 (1000/1200 MHz). > */ > static void clk_pm_cpu_set_rate_wa(unsigned long rate, struct regmap *base) > { > unsigned int cur_level; > > - if (rate != 1200 * 1000 * 1000) > + if (rate < 1000 * 1000 * 1000) > return; > > regmap_read(base, ARMADA_37XX_NB_CPU_LOAD, &cur_level); > -- > 2.20.1 > -- Gregory Clement, Bootlin Embedded Linux and Kernel engineering http://bootlin.com