The failure initially observed as boot failure on rx3600 ia64 machine
with RAID bus controller: Hewlett-Packard Company Smart Array P600:

    kernel unaligned access to 0xe000000105dd8b95, ip=0xa000000100b87551
    kernel unaligned access to 0xe000000105dd8e95, ip=0xa000000100b87551
    hpsa 0000:14:01.0: Controller reports max supported commands of 0 Using 16 
instead. Ensure that firmware is up to date.
    swapper/0[1]: error during unaligned kernel access

Here unaligned access comes from 'struct CommandList' that happens
to be packed. The change f749d8b7a ("scsi: hpsa: Correct dev cmds
outstanding for retried cmds") introduced unexpected padding and
un-aligned atomic_t from natural alignment to something else.

This change removes packing annotation from struct not intended to be
sent to controller as is. This restores natural `atomic_t` alignment.

The change is tested on the same rx3600 machine.

CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: Joe Szczypek <[email protected]>
CC: Scott Benesh <[email protected]>
CC: Scott Teel <[email protected]>
CC: Tomas Henzl <[email protected]>
CC: "Martin K. Petersen" <[email protected]>
CC: Don Brace <[email protected]>
Reported-by: John Paul Adrian Glaubitz <[email protected]>
Suggested-by: Don Brace <[email protected]>
Fixes: f749d8b7a "scsi: hpsa: Correct dev cmds outstanding for retried cmds"
Signed-off-by: Sergei Trofimovich <[email protected]>
---
 drivers/scsi/hpsa_cmd.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h
index 280e933d27e7..885b1f1fb20a 100644
--- a/drivers/scsi/hpsa_cmd.h
+++ b/drivers/scsi/hpsa_cmd.h
@@ -452,7 +452,7 @@ struct CommandList {
        bool retry_pending;
        struct hpsa_scsi_dev_t *device;
        atomic_t refcount; /* Must be last to avoid memset in hpsa_cmd_init() */
-} __packed __aligned(COMMANDLIST_ALIGNMENT);
+} __aligned(COMMANDLIST_ALIGNMENT);
 
 /* Max S/G elements in I/O accelerator command */
 #define IOACCEL1_MAXSGENTRIES           24
-- 
2.31.1

Reply via email to