Hi Pratyush,
Thank you for the patch.
On Tue, Mar 30, 2021 at 11:03:46PM +0530, Pratyush Yadav wrote:
> Convert Cadence DPHY binding to YAML.
>
> Signed-off-by: Pratyush Yadav <p.ya...@ti.com>
> ---
> .../devicetree/bindings/phy/cdns,dphy.txt | 20 --------
> .../devicetree/bindings/phy/cdns,dphy.yaml | 51 +++++++++++++++++++
> 2 files changed, 51 insertions(+), 20 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/phy/cdns,dphy.txt
> create mode 100644 Documentation/devicetree/bindings/phy/cdns,dphy.yaml
>
> diff --git a/Documentation/devicetree/bindings/phy/cdns,dphy.txt
> b/Documentation/devicetree/bindings/phy/cdns,dphy.txt
> deleted file mode 100644
> index 1095bc4e72d9..000000000000
> --- a/Documentation/devicetree/bindings/phy/cdns,dphy.txt
> +++ /dev/null
> @@ -1,20 +0,0 @@
> -Cadence DPHY
> -============
> -
> -Cadence DPHY block.
> -
> -Required properties:
> -- compatible: should be set to "cdns,dphy".
> -- reg: physical base address and length of the DPHY registers.
> -- clocks: DPHY reference clocks.
> -- clock-names: must contain "psm" and "pll_ref".
> -- #phy-cells: must be set to 0.
> -
> -Example:
> - dphy0: dphy@fd0e0000{
> - compatible = "cdns,dphy";
> - reg = <0x0 0xfd0e0000 0x0 0x1000>;
> - clocks = <&psm_clk>, <&pll_ref_clk>;
> - clock-names = "psm", "pll_ref";
> - #phy-cells = <0>;
> - };
> diff --git a/Documentation/devicetree/bindings/phy/cdns,dphy.yaml
> b/Documentation/devicetree/bindings/phy/cdns,dphy.yaml
> new file mode 100644
> index 000000000000..d1bbf96a8250
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/cdns,dphy.yaml
> @@ -0,0 +1,51 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/cdns,dphy.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Cadence DPHY Device Tree Bindings
> +
> +maintainers:
> + - Pratyush Yadav <p.ya...@ti.com>
> +
> +properties:
> + compatible:
> + items:
> + - const: cdns,dphy
> +
> + reg:
> + maxItems: 1
> + description: Physical base address and length of the DPHY registers.
You can drop the description.
> +
> + clocks:
> + maxItems: 2
> + description: DPHY reference clocks.
It's best to describe individual items, which will then allow dropping
the maxItems property:
clocks:
items:
- description: Description of the psm clock
- description: Description of the pll_ref clock
> +
> + clock-names:
> + items:
> + - const: psm
> + - const: pll_ref
> +
> + "#phy-cells":
> + const: 0
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - clock-names
> + - "#phy-cells"
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> +
> + dphy0: dphy@fd0e0000{
This is copied verbatim from the existing description, but while at it,
I'd rename the node from dphy@... to phy@..., as DT node are supposed to
be named according to the class of devices, not the specific device
type.
With these small issues addressed,
Reviewed-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
> + compatible = "cdns,dphy";
> + reg = <0xfd0e0000 0x1000>;
> + clocks = <&psm_clk>, <&pll_ref_clk>;
> + clock-names = "psm", "pll_ref";
> + #phy-cells = <0>;
> + };
--
Regards,
Laurent Pinchart
