On 4/6/21 6:09 PM, Pratyush Yadav wrote:
> On 04/04/21 04:24PM, Péter Ujfalusi wrote:
>> Hi Pratyush,
>>
>> On 3/30/21 8:33 PM, Pratyush Yadav wrote:
>>> The CSI2RX subsystem uses PSI-L DMA to transfer frames to memory. It can
>>> have up to 32 threads but the current driver only supports using one. So
>>> add an entry for that one thread.
>>
>> If you are absolutely sure that the other threads are not going to be
>> used, then:
> 
> The opposite in fact. I do expect other threads to be used in the 
> future. But the current driver can only use one so I figured it is 
> better to add just the thread that is currently needed and then I can 
> always add the rest later.
> 
> Why does this have to be a one-and-done deal? Is there anything wrong 
> with adding the other threads when the driver can actually use them?

You can skip CCing DMAengine (and me ;) ). Less subsystems is the better
when sending patches...

> 
>> Acked-by: Peter Ujfalusi <[email protected]>
>>
>> but I would consider adding the other threads if there is a chance that
>> the cs2rx will need to support it in the future.
>>
>>> Signed-off-by: Pratyush Yadav <[email protected]>
>>> ---
>>>  drivers/dma/ti/k3-psil-j721e.c | 10 ++++++++++
>>>  1 file changed, 10 insertions(+)
>>>
>>> diff --git a/drivers/dma/ti/k3-psil-j721e.c b/drivers/dma/ti/k3-psil-j721e.c
>>> index 7580870ed746..19ffa31e6dc6 100644
>>> --- a/drivers/dma/ti/k3-psil-j721e.c
>>> +++ b/drivers/dma/ti/k3-psil-j721e.c
>>> @@ -58,6 +58,14 @@
>>>             },                                      \
>>>     }
>>>  
>>> +#define PSIL_CSI2RX(x)                                     \
>>> +   {                                               \
>>> +           .thread_id = x,                         \
>>> +           .ep_config = {                          \
>>> +                   .ep_type = PSIL_EP_NATIVE,      \
>>> +           },                                      \
>>> +   }
>>> +
>>>  /* PSI-L source thread IDs, used for RX (DMA_DEV_TO_MEM) */
>>>  static struct psil_ep j721e_src_ep_map[] = {
>>>     /* SA2UL */
>>> @@ -138,6 +146,8 @@ static struct psil_ep j721e_src_ep_map[] = {
>>>     PSIL_PDMA_XY_PKT(0x4707),
>>>     PSIL_PDMA_XY_PKT(0x4708),
>>>     PSIL_PDMA_XY_PKT(0x4709),
>>> +   /* CSI2RX */
>>> +   PSIL_CSI2RX(0x4940),
>>>     /* CPSW9 */
>>>     PSIL_ETHERNET(0x4a00),
>>>     /* CPSW0 */
>>>
>>
>> -- 
>> Péter
> 

-- 
Péter

Reply via email to