After upgrading to 2.4.0, insertion of the es1371 modules causes my
machine to freeze right after printing
es1371: version v0.26 time 14:24:35 Jan 24 2001
es1371: found chip, vendor id 0x1274 device id 0x1371 revision 0x02
PCI: Assigned IRQ11 for device 00:0a.0
The box becomes unresponsive to the keyboard, the mouse, and the
network. The same thing happens when the driver is compiled directly
into the kernel.
Since the module worked ok in 2.4.0-test10, I tried reverting
drivers/sound/es1371.c to that version, but the same thing happened, so
I suspect it's a PCI problem.
I've got a K6-2/350 with the VIA MVP3 chipset. I used Debian's 2.95.3
to compile 2.4.0.
lspci -v output for the card:
00:0a.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 02)
Subsystem: Ensoniq Creative Sound Blaster AudioPCI64V, AudioPCI128
Flags: bus master, slow devsel, latency 64, IRQ 11
I/O ports at e800 [size=64]
Capabilities: [dc] Power Management version 1
Any ideas as to what is going on here?
Thanks,
David Bustos
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.tux.org/lkml/
