On Wed, Apr 07, 2021 at 01:07:18PM -0700, Badhri Jagan Sridharan wrote:
> tcpm_pd_build_request overwrites current_limit and supply_voltage
> even before port partner accepts the requests. This leaves stale
> values in current_limit and supply_voltage that get exported by
> "tcpm-source-psy-". Solving this problem by caching the request
> values of current limit/supply voltage in req_current_limit
> and req_supply_voltage. current_limit/supply_voltage gets updated
> once the port partner accepts the request.
> 
> Fixes: f2a8aa053c176 ("typec: tcpm: Represent source supply through 
> power_supply")
> Signed-off-by: Badhri Jagan Sridharan <bad...@google.com>
> Reviewed-by: Guenter Roeck <li...@roeck-us.net>
> Reviewed-by: Adam Thomson <adam.thomson.opensou...@diasemi.com>

Reviewed-by: Heikki Krogerus <heikki.kroge...@linux.intel.com>

> ---
> Changes since V1:
> * Fixed typo as suggested by Guenter Roeck.
> * Added Reviewed-by tags.
> ---
>  drivers/usb/typec/tcpm/tcpm.c | 17 ++++++++++-------
>  1 file changed, 10 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
> index ca1fc77697fc..4ea4b30ae885 100644
> --- a/drivers/usb/typec/tcpm/tcpm.c
> +++ b/drivers/usb/typec/tcpm/tcpm.c
> @@ -389,7 +389,10 @@ struct tcpm_port {
>       unsigned int operating_snk_mw;
>       bool update_sink_caps;
>  
> -     /* Requested current / voltage */
> +     /* Requested current / voltage to the port partner */
> +     u32 req_current_limit;
> +     u32 req_supply_voltage;
> +     /* Actual current / voltage limit of the local port */
>       u32 current_limit;
>       u32 supply_voltage;
>  
> @@ -2435,8 +2438,8 @@ static void tcpm_pd_ctrl_request(struct tcpm_port *port,
>               case SNK_TRANSITION_SINK:
>                       if (port->vbus_present) {
>                               tcpm_set_current_limit(port,
> -                                                    port->current_limit,
> -                                                    port->supply_voltage);
> +                                                    port->req_current_limit,
> +                                                    
> port->req_supply_voltage);
>                               port->explicit_contract = true;
>                               tcpm_set_auto_vbus_discharge_threshold(port,
>                                                                      
> TYPEC_PWR_MODE_PD,
> @@ -2545,8 +2548,8 @@ static void tcpm_pd_ctrl_request(struct tcpm_port *port,
>                       break;
>               case SNK_NEGOTIATE_PPS_CAPABILITIES:
>                       port->pps_data.active = true;
> -                     port->supply_voltage = port->pps_data.out_volt;
> -                     port->current_limit = port->pps_data.op_curr;
> +                     port->req_supply_voltage = port->pps_data.out_volt;
> +                     port->req_current_limit = port->pps_data.op_curr;
>                       tcpm_set_state(port, SNK_TRANSITION_SINK, 0);
>                       break;
>               case SOFT_RESET_SEND:
> @@ -3195,8 +3198,8 @@ static int tcpm_pd_build_request(struct tcpm_port 
> *port, u32 *rdo)
>                        flags & RDO_CAP_MISMATCH ? " [mismatch]" : "");
>       }
>  
> -     port->current_limit = ma;
> -     port->supply_voltage = mv;
> +     port->req_current_limit = ma;
> +     port->req_supply_voltage = mv;
>  
>       return 0;
>  }
> -- 
> 2.31.1.295.g9ea45b61b8-goog

-- 
heikki

Reply via email to