This allows us to shut down the mipi power domain on the imx8. The alternative
would be to drop the dphy from the mipi power domain in the SOCs device tree
and only have the DSI host controller visible there but since the PD is mostly
about the PHY that would defeat it's purpose.
This allows to shut off the power domain when blanking the LCD panel:
pm_genpd_summary before:
domain status slaves
/device runtime status
----------------------------------------------------------------------
mipi on
/devices/platform/soc@0/soc@0:bus@30800000/30a00300.dphy unsupported
/devices/platform/soc@0/soc@0:bus@30800000/30a00000.mipi_dsi suspended
after:
mipi off-0
/devices/platform/soc@0/soc@0:bus@30800000/30a00300.dphy suspended
/devices/platform/soc@0/soc@0:bus@30800000/30a00000.mipi_dsi suspended
Changes from v1:
- Tweak commit message slightly
Changes from v2:
- As per review comment by Lucas Stach
https://lore.kernel.org/linux-arm-kernel/ee22b072e0abe07559a3e6a63ccf6ece064a46cb.ca...@pengutronix.de/
Check for pm_runtime_get_sync failure
Changes from v3:
- As per review comment by Liu Ying
https://lore.kernel.org/linux-arm-kernel/424af315b677934fe6a91cee5a0a7aee058245a9.ca...@nxp.com/
https://lore.kernel.org/linux-arm-kernel/a98f7531b9d0293d3c89174446f742d4199cb27c.ca...@nxp.com/
- Use phy layers runtime pm
- simplify mixel_dphy_remove
Chanes from v4:
- As per review comment by Liu Ying
https://lore.kernel.org/linux-arm-kernel/daef1299e43f0372a95c149b979441f8083f4b15.ca...@nxp.com/
- Disable after probe errors
- core: increment device usage count on .configure as well
Guido Günther (2):
phy: core: Use runtime pm during configure too
phy: fsl-imx8-mipi-dphy: Hook into runtime pm
drivers/phy/freescale/phy-fsl-imx8-mipi-dphy.c | 13 +++++++++++++
drivers/phy/phy-core.c | 6 ++++++
2 files changed, 19 insertions(+)
--
2.30.1
