A test with the command below gives this error: /arch/arm/boot/dts/rv1108-evb.dt.yaml: pwm@10280000: 'interrupts' does not match any of the regexes: 'pinctrl-[0-9]+'
"interrupts" is an undocumented property, so remove them from pwm nodes in rv1108.dtsi. make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/pwm/pwm-rockchip.yaml Signed-off-by: Johan Jonker <jbx6...@gmail.com> --- arch/arm/boot/dts/rv1108.dtsi | 8 -------- 1 file changed, 8 deletions(-) diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi index 68e2282f7..af033d4c9 100644 --- a/arch/arm/boot/dts/rv1108.dtsi +++ b/arch/arm/boot/dts/rv1108.dtsi @@ -217,7 +217,6 @@ pwm4: pwm@10280000 { compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm"; reg = <0x10280000 0x10>; - interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>; clock-names = "pwm", "pclk"; pinctrl-names = "default"; @@ -229,7 +228,6 @@ pwm5: pwm@10280010 { compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm"; reg = <0x10280010 0x10>; - interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>; clock-names = "pwm", "pclk"; pinctrl-names = "default"; @@ -241,7 +239,6 @@ pwm6: pwm@10280020 { compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm"; reg = <0x10280020 0x10>; - interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>; clock-names = "pwm", "pclk"; pinctrl-names = "default"; @@ -253,7 +250,6 @@ pwm7: pwm@10280030 { compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm"; reg = <0x10280030 0x10>; - interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>; clock-names = "pwm", "pclk"; pinctrl-names = "default"; @@ -391,7 +387,6 @@ pwm0: pwm@20040000 { compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm"; reg = <0x20040000 0x10>; - interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>; clock-names = "pwm", "pclk"; pinctrl-names = "default"; @@ -403,7 +398,6 @@ pwm1: pwm@20040010 { compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm"; reg = <0x20040010 0x10>; - interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>; clock-names = "pwm", "pclk"; pinctrl-names = "default"; @@ -415,7 +409,6 @@ pwm2: pwm@20040020 { compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm"; reg = <0x20040020 0x10>; - interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>; clock-names = "pwm", "pclk"; pinctrl-names = "default"; @@ -427,7 +420,6 @@ pwm3: pwm@20040030 { compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm"; reg = <0x20040030 0x10>; - interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>; clock-names = "pwm", "pclk"; pinctrl-names = "default"; -- 2.11.0