[PATCH v4 12/17] media: i2c: rdacm20: Embed 'serializer' field

[Jacopo Mondi]

There's no reason to allocate dynamically the 'serializer' field in
the driver structure.

Embed the field and adjust all its users in the driver.

Reviewed-by: Kieran Bingham <kieran.bingham+rene...@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo+rene...@jmondi.org>
---
 drivers/media/i2c/rdacm20.c | 36 +++++++++++++++---------------------
 1 file changed, 15 insertions(+), 21 deletions(-)

diff --git a/drivers/media/i2c/rdacm20.c b/drivers/media/i2c/rdacm20.c
index 5e0314a2b1ca..029af8fd7485 100644
--- a/drivers/media/i2c/rdacm20.c
+++ b/drivers/media/i2c/rdacm20.c
@@ -312,7 +312,7 @@ static const struct ov10635_reg {
 
 struct rdacm20_device {
        struct device                   *dev;
-       struct max9271_device           *serializer;
+       struct max9271_device           serializer;
        struct i2c_client               *sensor;
        struct v4l2_subdev              sd;
        struct media_pad                pad;
@@ -399,7 +399,7 @@ static int rdacm20_s_stream(struct v4l2_subdev *sd, int 
enable)
 {
        struct rdacm20_device *dev = sd_to_rdacm20(sd);
 
-       return max9271_set_serial_link(dev->serializer, enable);
+       return max9271_set_serial_link(&dev->serializer, enable);
 }
 
 static int rdacm20_enum_mbus_code(struct v4l2_subdev *sd,
@@ -455,10 +455,10 @@ static int rdacm20_initialize(struct rdacm20_device *dev)
        unsigned int retry = 3;
        int ret;
 
-       max9271_wake_up(dev->serializer);
+       max9271_wake_up(&dev->serializer);
 
        /* Serial link disabled during config as it needs a valid pixel clock. 
*/
-       ret = max9271_set_serial_link(dev->serializer, false);
+       ret = max9271_set_serial_link(&dev->serializer, false);
        if (ret)
                return ret;
 
@@ -466,35 +466,35 @@ static int rdacm20_initialize(struct rdacm20_device *dev)
         *  Ensure that we have a good link configuration before attempting to
         *  identify the device.
         */
-       max9271_configure_i2c(dev->serializer, MAX9271_I2CSLVSH_469NS_234NS |
-                                              MAX9271_I2CSLVTO_1024US |
-                                              MAX9271_I2CMSTBT_105KBPS);
+       max9271_configure_i2c(&dev->serializer, MAX9271_I2CSLVSH_469NS_234NS |
+                                               MAX9271_I2CSLVTO_1024US |
+                                               MAX9271_I2CMSTBT_105KBPS);
 
-       max9271_configure_gmsl_link(dev->serializer);
+       max9271_configure_gmsl_link(&dev->serializer);
 
-       ret = max9271_verify_id(dev->serializer);
+       ret = max9271_verify_id(&dev->serializer);
        if (ret < 0)
                return ret;
 
-       ret = max9271_set_address(dev->serializer, dev->addrs[0]);
+       ret = max9271_set_address(&dev->serializer, dev->addrs[0]);
        if (ret < 0)
                return ret;
-       dev->serializer->client->addr = dev->addrs[0];
+       dev->serializer.client->addr = dev->addrs[0];
 
        /*
         * Reset the sensor by cycling the OV10635 reset signal connected to the
         * MAX9271 GPIO1 and verify communication with the OV10635.
         */
-       ret = max9271_enable_gpios(dev->serializer, MAX9271_GPIO1OUT);
+       ret = max9271_enable_gpios(&dev->serializer, MAX9271_GPIO1OUT);
        if (ret)
                return ret;
 
-       ret = max9271_clear_gpios(dev->serializer, MAX9271_GPIO1OUT);
+       ret = max9271_clear_gpios(&dev->serializer, MAX9271_GPIO1OUT);
        if (ret)
                return ret;
        usleep_range(10000, 15000);
 
-       ret = max9271_set_gpios(dev->serializer, MAX9271_GPIO1OUT);
+       ret = max9271_set_gpios(&dev->serializer, MAX9271_GPIO1OUT);
        if (ret)
                return ret;
        usleep_range(10000, 15000);
@@ -564,13 +564,7 @@ static int rdacm20_probe(struct i2c_client *client)
        if (!dev)
                return -ENOMEM;
        dev->dev = &client->dev;
-
-       dev->serializer = devm_kzalloc(&client->dev, sizeof(*dev->serializer),
-                                      GFP_KERNEL);
-       if (!dev->serializer)
-               return -ENOMEM;
-
-       dev->serializer->client = client;
+       dev->serializer.client = client;
 
        ret = of_property_read_u32_array(client->dev.of_node, "reg",
                                         dev->addrs, 2);
-- 
2.31.1