Hi, On 4/12/21 2:35 PM, Thomas Weißschuh wrote: > Tested with > * X570 I Aorus Pro Wifi (rev 1.0) > * B550M DS3H > * B550 Gaming X V2 (rev.1.x) > * Z390 I AORUS PRO WIFI (rev. 1.0) > > Those mainboards contain an ITE chips for management and > monitoring. > > They could also be handled by drivers/hwmon/i87.c. > But the SuperIO range used by i87 is already claimed and used by the > firmware. > > The following warning is printed at boot: > > kernel: ACPI Warning: SystemIO range 0x0000000000000A45-0x0000000000000A46 > conflicts with OpRegion 0x0000000000000A45-0x0000000000000A46 (\GSA1.SIO1) > (20200528/utaddress-204) > kernel: ACPI: This conflict may cause random problems and system instability > kernel: ACPI: If an ACPI driver is available for this device, you should use > it instead of the native driver > > This driver implements such an ACPI driver.
Thank you for your patch, I've applied this patch to my review-hans branch: https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git/log/?h=review-hans Note it will show up in my review-hans branch once I've pushed my local branch there, which might take a while. Once I've run some tests on this branch the patches there will be added to the platform-drivers-x86/for-next branch and eventually will be included in the pdx86 pull-request to Linus for the next merge-window. Regards, Hans > > Unfortunately not all sensor registers are handled by the firmware and even > less are exposed via WMI. > > Signed-off-by: Thomas Weißschuh <li...@weissschuh.net> > Reviewed-by: Guenter Roeck <li...@roeck-us.net> > > --- > > Changes since v4: > * Style > * Wording > * Alignment of email addresses > --- > MAINTAINERS | 6 + > drivers/platform/x86/Kconfig | 11 ++ > drivers/platform/x86/Makefile | 1 + > drivers/platform/x86/gigabyte-wmi.c | 195 ++++++++++++++++++++++++++++ > 4 files changed, 213 insertions(+) > create mode 100644 drivers/platform/x86/gigabyte-wmi.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index d92f85ca831d..7fb5e2ba489b 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -7543,6 +7543,12 @@ F: Documentation/filesystems/gfs2* > F: fs/gfs2/ > F: include/uapi/linux/gfs2_ondisk.h > > +GIGABYTE WMI DRIVER > +M: Thomas Weißschuh <tho...@weissschuh.net> > +L: platform-driver-...@vger.kernel.org > +S: Maintained > +F: drivers/platform/x86/gigabyte-wmi.c > + > GNSS SUBSYSTEM > M: Johan Hovold <jo...@kernel.org> > S: Maintained > diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig > index ad4e630e73e2..96622a2106f7 100644 > --- a/drivers/platform/x86/Kconfig > +++ b/drivers/platform/x86/Kconfig > @@ -123,6 +123,17 @@ config XIAOMI_WMI > To compile this driver as a module, choose M here: the module will > be called xiaomi-wmi. > > +config GIGABYTE_WMI > + tristate "Gigabyte WMI temperature driver" > + depends on ACPI_WMI > + depends on HWMON > + help > + Say Y here if you want to support WMI-based temperature reporting on > + Gigabyte mainboards. > + > + To compile this driver as a module, choose M here: the module will > + be called gigabyte-wmi. > + > config ACERHDF > tristate "Acer Aspire One temperature and fan driver" > depends on ACPI && THERMAL > diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile > index 60d554073749..1621ebfd04fd 100644 > --- a/drivers/platform/x86/Makefile > +++ b/drivers/platform/x86/Makefile > @@ -15,6 +15,7 @@ obj-$(CONFIG_INTEL_WMI_THUNDERBOLT) += > intel-wmi-thunderbolt.o > obj-$(CONFIG_MXM_WMI) += mxm-wmi.o > obj-$(CONFIG_PEAQ_WMI) += peaq-wmi.o > obj-$(CONFIG_XIAOMI_WMI) += xiaomi-wmi.o > +obj-$(CONFIG_GIGABYTE_WMI) += gigabyte-wmi.o > > # Acer > obj-$(CONFIG_ACERHDF) += acerhdf.o > diff --git a/drivers/platform/x86/gigabyte-wmi.c > b/drivers/platform/x86/gigabyte-wmi.c > new file mode 100644 > index 000000000000..bb1b0b205fa7 > --- /dev/null > +++ b/drivers/platform/x86/gigabyte-wmi.c > @@ -0,0 +1,195 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later > +/* > + * Copyright (C) 2021 Thomas Weißschuh <tho...@weissschuh.net> > + */ > +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt > + > +#include <linux/acpi.h> > +#include <linux/dmi.h> > +#include <linux/hwmon.h> > +#include <linux/module.h> > +#include <linux/wmi.h> > + > +#define GIGABYTE_WMI_GUID "DEADBEEF-2001-0000-00A0-C90629100000" > +#define NUM_TEMPERATURE_SENSORS 6 > + > +static bool force_load; > +module_param(force_load, bool, 0444); > +MODULE_PARM_DESC(force_load, "Force loading on unknown platform"); > + > +static u8 usable_sensors_mask; > + > +enum gigabyte_wmi_commandtype { > + GIGABYTE_WMI_BUILD_DATE_QUERY = 0x1, > + GIGABYTE_WMI_MAINBOARD_TYPE_QUERY = 0x2, > + GIGABYTE_WMI_FIRMWARE_VERSION_QUERY = 0x4, > + GIGABYTE_WMI_MAINBOARD_NAME_QUERY = 0x5, > + GIGABYTE_WMI_TEMPERATURE_QUERY = 0x125, > +}; > + > +struct gigabyte_wmi_args { > + u32 arg1; > +}; > + > +static int gigabyte_wmi_perform_query(struct wmi_device *wdev, > + enum gigabyte_wmi_commandtype command, > + struct gigabyte_wmi_args *args, struct > acpi_buffer *out) > +{ > + const struct acpi_buffer in = { > + .length = sizeof(*args), > + .pointer = args, > + }; > + > + acpi_status ret = wmidev_evaluate_method(wdev, 0x0, command, &in, out); > + > + if (ACPI_FAILURE(ret)) > + return -EIO; > + > + return 0; > +} > + > +static int gigabyte_wmi_query_integer(struct wmi_device *wdev, > + enum gigabyte_wmi_commandtype command, > + struct gigabyte_wmi_args *args, u64 *res) > +{ > + union acpi_object *obj; > + struct acpi_buffer result = { ACPI_ALLOCATE_BUFFER, NULL }; > + int ret; > + > + ret = gigabyte_wmi_perform_query(wdev, command, args, &result); > + if (ret) > + return ret; > + obj = result.pointer; > + if (obj && obj->type == ACPI_TYPE_INTEGER) > + *res = obj->integer.value; > + else > + ret = -EIO; > + kfree(result.pointer); > + return ret; > +} > + > +static int gigabyte_wmi_temperature(struct wmi_device *wdev, u8 sensor, long > *res) > +{ > + struct gigabyte_wmi_args args = { > + .arg1 = sensor, > + }; > + u64 temp; > + acpi_status ret; > + > + ret = gigabyte_wmi_query_integer(wdev, GIGABYTE_WMI_TEMPERATURE_QUERY, > &args, &temp); > + if (ret == 0) { > + if (temp == 0) > + return -ENODEV; > + *res = (s8)temp * 1000; // value is a signed 8-bit integer > + } > + return ret; > +} > + > +static int gigabyte_wmi_hwmon_read(struct device *dev, enum > hwmon_sensor_types type, > + u32 attr, int channel, long *val) > +{ > + struct wmi_device *wdev = dev_get_drvdata(dev); > + > + return gigabyte_wmi_temperature(wdev, channel, val); > +} > + > +static umode_t gigabyte_wmi_hwmon_is_visible(const void *data, enum > hwmon_sensor_types type, > + u32 attr, int channel) > +{ > + return usable_sensors_mask & BIT(channel) ? 0444 : 0; > +} > + > +static const struct hwmon_channel_info *gigabyte_wmi_hwmon_info[] = { > + HWMON_CHANNEL_INFO(temp, > + HWMON_T_INPUT, > + HWMON_T_INPUT, > + HWMON_T_INPUT, > + HWMON_T_INPUT, > + HWMON_T_INPUT, > + HWMON_T_INPUT), > + NULL > +}; > + > +static const struct hwmon_ops gigabyte_wmi_hwmon_ops = { > + .read = gigabyte_wmi_hwmon_read, > + .is_visible = gigabyte_wmi_hwmon_is_visible, > +}; > + > +static const struct hwmon_chip_info gigabyte_wmi_hwmon_chip_info = { > + .ops = &gigabyte_wmi_hwmon_ops, > + .info = gigabyte_wmi_hwmon_info, > +}; > + > +static u8 gigabyte_wmi_detect_sensor_usability(struct wmi_device *wdev) > +{ > + int i; > + long temp; > + u8 r = 0; > + > + for (i = 0; i < NUM_TEMPERATURE_SENSORS; i++) { > + if (!gigabyte_wmi_temperature(wdev, i, &temp)) > + r |= BIT(i); > + } > + return r; > +} > + > +static const struct dmi_system_id gigabyte_wmi_known_working_platforms[] = { > + { .matches = { > + DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "Gigabyte Technology Co., > Ltd."), > + DMI_EXACT_MATCH(DMI_BOARD_NAME, "B550 GAMING X V2"), > + }}, > + { .matches = { > + DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "Gigabyte Technology Co., > Ltd."), > + DMI_EXACT_MATCH(DMI_BOARD_NAME, "B550M DS3H"), > + }}, > + { .matches = { > + DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "Gigabyte Technology Co., > Ltd."), > + DMI_EXACT_MATCH(DMI_BOARD_NAME, "Z390 I AORUS PRO WIFI-CF"), > + }}, > + { .matches = { > + DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "Gigabyte Technology Co., > Ltd."), > + DMI_EXACT_MATCH(DMI_BOARD_NAME, "X570 I AORUS PRO WIFI"), > + }}, > + { } > +}; > + > +static int gigabyte_wmi_probe(struct wmi_device *wdev, const void *context) > +{ > + struct device *hwmon_dev; > + > + if (!dmi_check_system(gigabyte_wmi_known_working_platforms)) { > + if (!force_load) > + return -ENODEV; > + dev_warn(&wdev->dev, "Forcing load on unknown platform"); > + } > + > + usable_sensors_mask = gigabyte_wmi_detect_sensor_usability(wdev); > + if (!usable_sensors_mask) { > + dev_info(&wdev->dev, "No temperature sensors usable"); > + return -ENODEV; > + } > + > + hwmon_dev = devm_hwmon_device_register_with_info(&wdev->dev, > "gigabyte_wmi", wdev, > + > &gigabyte_wmi_hwmon_chip_info, NULL); > + > + return PTR_ERR_OR_ZERO(hwmon_dev); > +} > + > +static const struct wmi_device_id gigabyte_wmi_id_table[] = { > + { GIGABYTE_WMI_GUID, NULL }, > + { } > +}; > + > +static struct wmi_driver gigabyte_wmi_driver = { > + .driver = { > + .name = "gigabyte-wmi", > + }, > + .id_table = gigabyte_wmi_id_table, > + .probe = gigabyte_wmi_probe, > +}; > +module_wmi_driver(gigabyte_wmi_driver); > + > +MODULE_DEVICE_TABLE(wmi, gigabyte_wmi_id_table); > +MODULE_AUTHOR("Thomas Weißschuh <tho...@weissschuh.net>"); > +MODULE_DESCRIPTION("Gigabyte WMI temperature driver"); > +MODULE_LICENSE("GPL"); > > base-commit: 144c79ef33536b4ecb4951e07dbc1f2b7fa99d32 >
