-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Stephen Hemminger wrote: >> [2.] Full description of the problem/report: >> I upgraded my system to fairly new hardware and find myself unable to >> compile any kernel source and the system panics under high load e.g. >> resyncing a RAID or building a kernel. Building kernel is 100% sure to >> result in a kernel panic. > > Sounds like bad memory. Run memtest for at least 24hrs. I think I'm going to just switch the memory modules. If the problem persists maybe memtest will be able to shed some light on the problem. Good thing, the weekend is coming.
> > [8.6.] SCSI information (from /proc/scsi/scsi) > > Attached devices: > > Host: scsi0 Channel: 00 Id: 01 Lun: 00 > > Vendor: IBM-PCCO Model: DDRS-34560W !# Rev: S97B > > Type: Direct-Access ANSI SCSI revision: 02 > > Host: scsi0 Channel: 00 Id: 05 Lun: 00 > > Vendor: NEC Model: CD-ROM DRIVE:464 Rev: 1.14 > > Type: CD-ROM ANSI SCSI revision: 02 > > Host: scsi1 Channel: 00 Id: 00 Lun: 00 > > Vendor: ATA Model: Maxtor 6V250F0 Rev: VA11 > > Type: Direct-Access ANSI SCSI revision: 05 > > Host: scsi2 Channel: 00 Id: 00 Lun: 00 > > Vendor: ATA Model: Maxtor 6V250F0 Rev: VA11 > > Type: Direct-Access ANSI SCSI revision: 05 > > Host: scsi3 Channel: 00 Id: 00 Lun: 00 > > Vendor: ATA Model: Maxtor 6V250F0 Rev: VA11 > > Type: Direct-Access ANSI SCSI revision: 05 > > Host: scsi4 Channel: 00 Id: 00 Lun: 00 > > Vendor: ATA Model: Maxtor 6V250F0 Rev: VA11 > > Type: Direct-Access ANSI SCSI revision: 05 > > Host: scsi5 Channel: 00 Id: 00 Lun: 00 > > Vendor: ATA Model: Maxtor 6V250F0 Rev: VA11 > > Type: Direct-Access ANSI SCSI revision: 05 > > Host: scsi6 Channel: 00 Id: 00 Lun: 00 > > Vendor: ATA Model: Maxtor 6V250F0 Rev: VA11 > > Type: Direct-Access ANSI SCSI revision: 05 > > Host: scsi7 Channel: 00 Id: 00 Lun: 00 > > Vendor: ATA Model: Maxtor 6L250R0 Rev: BAJ4 > > Type: Direct-Access ANSI SCSI revision: 05 > > Host: scsi7 Channel: 00 Id: 01 Lun: 00 > > Vendor: ATA Model: Maxtor 6L250R0 Rev: BAH4 > > Type: Direct-Access ANSI SCSI revision: 05 > > That is a lot of hard drives... my guess would be that your power > supply is marginal, a cable/adapter card isn't seated perfectly > somewhere, something is overheating, or something like that. > Hmm. Good thinking. But the system ran perfectly stable with a Core2Duo E6600 and the same amount of hard drives. There are dedicated power supplies with enough juice for the devices and for the mainboard with the CPU and the usual PCI/PCIe cards. I'll have a closer look at the whole hardware thing at the weekend. Thanks for the fast responses. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFHmHSxZhAcjSIb10ERCsH6AKCNwut8JZ494tqyq6/GyWZoP3H+1ACglpCk xuRGbvfUzotk221yoI5h6uM= =W/b+ -----END PGP SIGNATURE----- -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
