Hi Neil, On Fri, Apr 16, 2021 at 11:27:35AM +0200, Neil Armstrong wrote: > This adds DW-HDMI driver a glue option to disable loading of the CEC > sub-driver. > > On some SoCs, the CEC functionality is enabled in the IP config bits, but the > CEC bus is non-functional like on Amlogic SoCs, where the CEC config bit is > set > but the DW-HDMI CEC signal is not connected to a physical pin, leading to some > confusion when the DW-HDMI CEC controller can't communicate on the bus.
If we can't trust the CEC config bit, would it be better to not use it at all, and instead let each platform glue logic tell whether to enable CEC or not ? > Jernej Skrabec (1): > drm/bridge/synopsys: dw-hdmi: Add an option to suppress loading CEC > driver > > Neil Armstrong (1): > drm/meson: dw-hdmi: disable DW-HDMI CEC sub-driver > > drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 2 +- > drivers/gpu/drm/meson/meson_dw_hdmi.c | 1 + > include/drm/bridge/dw_hdmi.h | 2 ++ > 3 files changed, 4 insertions(+), 1 deletion(-) > -- Regards, Laurent Pinchart
