From: Jisheng Zhang <jszh...@kernel.org> HAVE_MOVE_PUD enables remapping pages at the PUD level if both the source and destination addresses are PUD-aligned. HAVE_MOVE_PMD does similar speedup on the PMD level.
With HAVE_MOVE_PUD enabled, there is about a 143x improvement on qemu With HAVE_MOVE_PMD enabled, there is about a 5x improvement on qemu Signed-off-by: Jisheng Zhang <jszh...@kernel.org> --- Hi all, After reading the risc-v privileged spec, I think it's safe to support the HAVE_MOVE_PUD and HAVE_MOVE_PMD optimization on riscv. The patch passed the mremap_test on QEMU. However this can't be tested on real HW due to lack of HW boards, this is the reason why I mark this patch as RFT. I hope I can buy a sipeed Allwiner D1 SoC powered SBC soon, at least I can test HAVE_MOVE_PMD. Helping me to test on real HW is appreciated! Thanks arch/riscv/Kconfig | 2 ++ arch/riscv/include/asm/pgtable.h | 12 ++++++++++++ 2 files changed, 14 insertions(+) diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig index e8074d248457..37660de68b00 100644 --- a/arch/riscv/Kconfig +++ b/arch/riscv/Kconfig @@ -80,6 +80,8 @@ config RISCV select HAVE_KPROBES select HAVE_KPROBES_ON_FTRACE select HAVE_KRETPROBES + select HAVE_MOVE_PMD + select HAVE_MOVE_PUD select HAVE_PCI select HAVE_PERF_EVENTS select HAVE_PERF_REGS diff --git a/arch/riscv/include/asm/pgtable.h b/arch/riscv/include/asm/pgtable.h index ebf817c1bdf4..287733b95d10 100644 --- a/arch/riscv/include/asm/pgtable.h +++ b/arch/riscv/include/asm/pgtable.h @@ -360,6 +360,18 @@ static inline void set_pte_at(struct mm_struct *mm, set_pte(ptep, pteval); } +static inline void set_pmd_at(struct mm_struct *mm, unsigned long addr, + pmd_t *pmdp, pmd_t pmd) +{ + set_pmd(pmdp, pmd); +} + +static inline void set_pud_at(struct mm_struct *mm, unsigned long addr, + pud_t *pudp, pud_t pud) +{ + set_pud(pudp, pud); +} + static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) { -- 2.31.0