From: Andre Przywara <andre.przyw...@arm.com> [ Upstream commit 3dd4ce4185df6798dcdcc3669bddb35899d7d5e1 ]
Commit 941432d00768 ("arm64: dts: allwinner: Drop non-removable from SoPine/LTS SD card") enabled the card detect GPIO for the SOPine module, along the way with the Pine64-LTS, which share the same base .dtsi. However while both boards indeed have a working CD GPIO on PF6, the polarity is different: the SOPine modules uses a "push-pull" socket, which has an active-high switch, while the Pine64-LTS use the more traditional push-push socket and the common active-low switch. Fix the polarity in the sopine.dtsi, and overwrite it in the LTS board .dts, to make the SD card work again on systems using SOPine modules. Fixes: 941432d00768 ("arm64: dts: allwinner: Drop non-removable from SoPine/LTS SD card") Reported-by: Ashley <cont...@victorianfox.com> Signed-off-by: Andre Przywara <andre.przyw...@arm.com> Signed-off-by: Maxime Ripard <max...@cerno.tech> Link: https://lore.kernel.org/r/20210316144219.5973-1-andre.przyw...@arm.com Signed-off-by: Sasha Levin <sas...@kernel.org> --- arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts | 4 ++++ arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi | 2 +- 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts index 302e24be0a31..a1f621b388fe 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts @@ -8,3 +8,7 @@ compatible = "pine64,pine64-lts", "allwinner,sun50i-r18", "allwinner,sun50i-a64"; }; + +&mmc0 { + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 push-push switch */ +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi index 3402cec87035..df62044ff7a7 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi @@ -34,7 +34,7 @@ vmmc-supply = <®_dcdc1>; disable-wp; bus-width = <4>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 push-pull switch */ status = "okay"; }; -- 2.30.2