These clocks are now handled from within the icc framework and are
no longer registered from within the CCF. Remove them.
Signed-off-by: Konrad Dybcio <konrad.dyb...@linaro.org>
---
arch/arm64/boot/dts/qcom/sdm630.dtsi | 49 +++++++-----------------------------
1 file changed, 9 insertions(+), 40 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi
b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index ec6003212c4d..f11d2a07508c 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -605,9 +605,6 @@ bimc: interconnect@1008000 {
compatible = "qcom,sdm660-bimc";
reg = <0x01008000 0x78000>;
#interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
- <&rpmcc RPM_SMD_BIMC_A_CLK>;
};
restart@10ac000 {
@@ -619,28 +616,17 @@ cnoc: interconnect@1500000 {
compatible = "qcom,sdm660-cnoc";
reg = <0x01500000 0x10000>;
#interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
- <&rpmcc RPM_SMD_CNOC_A_CLK>;
};
snoc: interconnect@1626000 {
compatible = "qcom,sdm660-snoc";
reg = <0x01626000 0x7090>;
#interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
- <&rpmcc RPM_SMD_SNOC_A_CLK>;
};
anoc2_smmu: iommu@16c0000 {
compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2";
reg = <0x016c0000 0x40000>;
-
- assigned-clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
- assigned-clock-rates = <1000>;
- clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
- clock-names = "bus";
#global-interrupts = <2>;
#iommu-cells = <1>;
@@ -685,16 +671,12 @@ a2noc: interconnect@1704000 {
compatible = "qcom,sdm660-a2noc";
reg = <0x01704000 0xc100>;
#interconnect-cells = <1>;
- clock-names = "bus",
- "bus_a",
- "ipa",
+ clock-names = "ipa",
"ufs_axi",
"aggre2_ufs_axi",
"aggre2_usb3_axi",
"cfg_noc_usb2_axi";
- clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>,
- <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>,
- <&rpmcc RPM_SMD_IPA_CLK>,
+ clocks = <&rpmcc RPM_SMD_IPA_CLK>,
<&gcc GCC_UFS_AXI_CLK>,
<&gcc GCC_AGGRE2_UFS_AXI_CLK>,
<&gcc GCC_AGGRE2_USB3_AXI_CLK>,
@@ -705,10 +687,8 @@ mnoc: interconnect@1745000 {
compatible = "qcom,sdm660-mnoc";
reg = <0x01745000 0xa010>;
#interconnect-cells = <1>;
- clock-names = "bus", "bus_a", "iface";
- clocks = <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK>,
- <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK_A>,
- <&mmcc AHB_CLK_SRC>;
+ clock-names = "iface";
+ clocks = <&mmcc AHB_CLK_SRC>;
};
tsens: thermal-sensor@10ae000 {
@@ -1228,20 +1208,16 @@ usb3: usb@a8f8800 {
<&gcc GCC_USB30_MASTER_CLK>,
<&gcc GCC_AGGRE2_USB3_AXI_CLK>,
<&gcc GCC_USB30_SLEEP_CLK>,
- <&gcc GCC_USB30_MOCK_UTMI_CLK>,
- <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
+ <&gcc GCC_USB30_MOCK_UTMI_CLK>;
clock-names = "cfg_noc",
"core",
"iface",
"sleep",
- "mock_utmi",
- "bus";
+ "mock_utmi";
assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
- <&gcc GCC_USB30_MASTER_CLK>,
- <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
- assigned-clock-rates = <19200000>, <120000000>,
- <19200000>;
+ <&gcc GCC_USB30_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <120000000>;
interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
@@ -2144,10 +2120,9 @@ mmss_smmu: iommu@cd00000 {
clocks = <&mmcc MNOC_AHB_CLK>,
<&mmcc BIMC_SMMU_AHB_CLK>,
- <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK>,
<&mmcc BIMC_SMMU_AXI_CLK>;
clock-names = "iface-mm", "iface-smmu",
- "bus-mm", "bus-smmu";
+ "bus-smmu";
#global-interrupts = <2>;
#iommu-cells = <1>;
@@ -2264,12 +2239,6 @@ gnoc: interconnect@17900000 {
compatible = "qcom,sdm660-gnoc";
reg = <0x17900000 0xe000>;
#interconnect-cells = <1>;
- /*
- * This one apparently features no clocks,
- * so let's not mess with the driver needlessly
- */
- clock-names = "bus", "bus_a";
- clocks = <&xo_board>, <&xo_board>;
};
apcs_glb: mailbox@17911000 {
--
2.42.0
