The script has fallen behind tracepoint changes for a while, fix it up.
Most changes are mechanical (renames, removal of tracepoint parameters
that are not used by the script). More notable change involves
mm_vmscan_lru_isolate which is relying on the isolate_mode to determine
if the inactive list is being scanned. However the parameter currently
only indicates ISOLATE_UNMAPPED. We can use the lru parameter instead to
determine which list is scanned, and stop checking isolate_mode.
Signed-off-by: Vlastimil Babka <vba...@suse.cz>
---
.../postprocess/trace-vmscan-postprocess.pl | 40 ++++++++-----------
1 file changed, 17 insertions(+), 23 deletions(-)
diff --git a/Documentation/trace/postprocess/trace-vmscan-postprocess.pl
b/Documentation/trace/postprocess/trace-vmscan-postprocess.pl
index e24c009789a0..725d41a8d4ef 100644
--- a/Documentation/trace/postprocess/trace-vmscan-postprocess.pl
+++ b/Documentation/trace/postprocess/trace-vmscan-postprocess.pl
@@ -107,14 +107,14 @@ GetOptions(
);
# Defaults for dynamically discovered regex's
-my $regex_direct_begin_default = 'order=([0-9]*) may_writepage=([0-9]*)
gfp_flags=([A-Z_|]*)';
+my $regex_direct_begin_default = 'order=([0-9]*) gfp_flags=([A-Z_|]*)';
my $regex_direct_end_default = 'nr_reclaimed=([0-9]*)';
my $regex_kswapd_wake_default = 'nid=([0-9]*) order=([0-9]*)';
my $regex_kswapd_sleep_default = 'nid=([0-9]*)';
-my $regex_wakeup_kswapd_default = 'nid=([0-9]*) zid=([0-9]*) order=([0-9]*)
gfp_flags=([A-Z_|]*)';
-my $regex_lru_isolate_default = 'isolate_mode=([0-9]*) classzone_idx=([0-9]*)
order=([0-9]*) nr_requested=([0-9]*) nr_scanned=([0-9]*) nr_skipped=([0-9]*)
nr_taken=([0-9]*) lru=([a-z_]*)';
+my $regex_wakeup_kswapd_default = 'nid=([0-9]*) order=([0-9]*)
gfp_flags=([A-Z_|]*)';
+my $regex_lru_isolate_default = 'isolate_mode=([0-9]*) classzone=([0-9]*)
order=([0-9]*) nr_requested=([0-9]*) nr_scanned=([0-9]*) nr_skipped=([0-9]*)
nr_taken=([0-9]*) lru=([a-z_]*)';
my $regex_lru_shrink_inactive_default = 'nid=([0-9]*) nr_scanned=([0-9]*)
nr_reclaimed=([0-9]*) nr_dirty=([0-9]*) nr_writeback=([0-9]*)
nr_congested=([0-9]*) nr_immediate=([0-9]*) nr_activate_anon=([0-9]*)
nr_activate_file=([0-9]*) nr_ref_keep=([0-9]*) nr_unmap_fail=([0-9]*)
priority=([0-9]*) flags=([A-Z_|]*)';
-my $regex_lru_shrink_active_default = 'lru=([A-Z_]*) nr_scanned=([0-9]*)
nr_rotated=([0-9]*) priority=([0-9]*)';
+my $regex_lru_shrink_active_default = 'lru=([A-Z_]*) nr_taken=([0-9]*)
nr_active=([0-9]*) nr_deactivated=([0-9]*) nr_referenced=([0-9]*)
priority=([0-9]*) flags=([A-Z_|]*)' ;
my $regex_writepage_default = 'page=([0-9a-f]*) pfn=([0-9]*) flags=([A-Z_|]*)';
# Dyanically discovered regex
@@ -184,8 +184,7 @@ sub generate_traceevent_regex {
$regex_direct_begin = generate_traceevent_regex(
"vmscan/mm_vmscan_direct_reclaim_begin",
$regex_direct_begin_default,
- "order", "may_writepage",
- "gfp_flags");
+ "order", "gfp_flags");
$regex_direct_end = generate_traceevent_regex(
"vmscan/mm_vmscan_direct_reclaim_end",
$regex_direct_end_default,
@@ -201,11 +200,11 @@ $regex_kswapd_sleep = generate_traceevent_regex(
$regex_wakeup_kswapd = generate_traceevent_regex(
"vmscan/mm_vmscan_wakeup_kswapd",
$regex_wakeup_kswapd_default,
- "nid", "zid", "order", "gfp_flags");
+ "nid", "order", "gfp_flags");
$regex_lru_isolate = generate_traceevent_regex(
"vmscan/mm_vmscan_lru_isolate",
$regex_lru_isolate_default,
- "isolate_mode", "classzone_idx", "order",
+ "isolate_mode", classzone", "order",
"nr_requested", "nr_scanned", "nr_skipped", "nr_taken",
"lru");
$regex_lru_shrink_inactive = generate_traceevent_regex(
@@ -218,11 +217,10 @@ $regex_lru_shrink_inactive = generate_traceevent_regex(
$regex_lru_shrink_active = generate_traceevent_regex(
"vmscan/mm_vmscan_lru_shrink_active",
$regex_lru_shrink_active_default,
- "nid", "zid",
- "lru",
- "nr_scanned", "nr_rotated", "priority");
+ "nid", "nr_taken", "nr_active", "nr_deactivated",
"nr_referenced",
+ "priority", "flags");
$regex_writepage = generate_traceevent_regex(
- "vmscan/mm_vmscan_writepage",
+ "vmscan/mm_vmscan_write_folio",
$regex_writepage_default,
"page", "pfn", "flags");
@@ -371,7 +369,7 @@ sub process_events {
print " $regex_wakeup_kswapd\n";
next;
}
- my $order = $3;
+ my $order = $2;
$perprocesspid{$process_pid}->{MM_VMSCAN_WAKEUP_KSWAPD_PERORDER}[$order]++;
} elsif ($tracepoint eq "mm_vmscan_lru_isolate") {
$details = $6;
@@ -381,18 +379,14 @@ sub process_events {
print " $regex_lru_isolate/o\n";
next;
}
- my $isolate_mode = $1;
my $nr_scanned = $5;
- my $file = $8;
-
- # To closer match vmstat scanning statistics, only
count isolate_both
- # and isolate_inactive as scanning. isolate_active is
rotation
- # isolate_inactive == 1
- # isolate_active == 2
- # isolate_both == 3
- if ($isolate_mode != 2) {
+ my $lru = $8;
+
+ # To closer match vmstat scanning statistics, only count
+ # inactive lru as scanning
+ if ($lru =~ /inactive_/) {
$perprocesspid{$process_pid}->{HIGH_NR_SCANNED}
+= $nr_scanned;
- if ($file =~ /_file/) {
+ if ($lru =~ /_file/) {
$perprocesspid{$process_pid}->{HIGH_NR_FILE_SCANNED} += $nr_scanned;
} else {
$perprocesspid{$process_pid}->{HIGH_NR_ANON_SCANNED} += $nr_scanned;
--
2.42.0
