Introduce device address in hardcode TCM table.
Device address is used for address translation.
Also, previous method(hack) to mask few bits from address
to achieve address translation is removed
Signed-off-by: Tanmay Shah <tanmay.s...@amd.com>
---
drivers/remoteproc/xlnx_r5_remoteproc.c | 58 +++++++++----------------
1 file changed, 20 insertions(+), 38 deletions(-)
diff --git a/drivers/remoteproc/xlnx_r5_remoteproc.c
b/drivers/remoteproc/xlnx_r5_remoteproc.c
index efd758c2f4ed..4395edea9a64 100644
--- a/drivers/remoteproc/xlnx_r5_remoteproc.c
+++ b/drivers/remoteproc/xlnx_r5_remoteproc.c
@@ -39,12 +39,14 @@ enum zynqmp_r5_cluster_mode {
* struct mem_bank_data - Memory Bank description
*
* @addr: Start address of memory bank
+ * @da: device address
* @size: Size of Memory bank
* @pm_domain_id: Power-domains id of memory bank for firmware to turn on/off
* @bank_name: name of the bank for remoteproc framework
*/
struct mem_bank_data {
phys_addr_t addr;
+ u32 da;
size_t size;
u32 pm_domain_id;
char *bank_name;
@@ -76,18 +78,18 @@ struct mbox_info {
* accepted for system-dt specifications and upstreamed in linux kernel
*/
static const struct mem_bank_data zynqmp_tcm_banks_split[] = {
- {0xffe00000UL, 0x10000UL, PD_R5_0_ATCM, "atcm0"}, /* TCM 64KB each */
- {0xffe20000UL, 0x10000UL, PD_R5_0_BTCM, "btcm0"},
- {0xffe90000UL, 0x10000UL, PD_R5_1_ATCM, "atcm1"},
- {0xffeb0000UL, 0x10000UL, PD_R5_1_BTCM, "btcm1"},
+ {0xffe00000UL, 0x0, 0x10000UL, PD_R5_0_ATCM, "atcm0"}, /* TCM 64KB each
*/
+ {0xffe20000UL, 0x20000, 0x10000UL, PD_R5_0_BTCM, "btcm0"},
+ {0xffe90000UL, 0x0, 0x10000UL, PD_R5_1_ATCM, "atcm1"},
+ {0xffeb0000UL, 0x20000, 0x10000UL, PD_R5_1_BTCM, "btcm1"},
};
/* In lockstep mode cluster combines each 64KB TCM and makes 128KB TCM */
static const struct mem_bank_data zynqmp_tcm_banks_lockstep[] = {
- {0xffe00000UL, 0x20000UL, PD_R5_0_ATCM, "atcm0"}, /* TCM 128KB each */
- {0xffe20000UL, 0x20000UL, PD_R5_0_BTCM, "btcm0"},
- {0, 0, PD_R5_1_ATCM, ""},
- {0, 0, PD_R5_1_BTCM, ""},
+ {0xffe00000UL, 0x0, 0x20000UL, PD_R5_0_ATCM, "atcm0"}, /* TCM 128KB
each */
+ {0xffe20000UL, 0x20000, 0x20000UL, PD_R5_0_BTCM, "btcm0"},
+ {0, 0, 0, PD_R5_1_ATCM, ""},
+ {0, 0, 0, PD_R5_1_BTCM, ""},
};
/**
@@ -534,30 +536,6 @@ static int tcm_mem_map(struct rproc *rproc,
/* clear TCMs */
memset_io(va, 0, mem->len);
- /*
- * The R5s expect their TCM banks to be at address 0x0 and 0x2000,
- * while on the Linux side they are at 0xffexxxxx.
- *
- * Zero out the high 12 bits of the address. This will give
- * expected values for TCM Banks 0A and 0B (0x0 and 0x20000).
- */
- mem->da &= 0x000fffff;
-
- /*
- * TCM Banks 1A and 1B still have to be translated.
- *
- * Below handle these two banks' absolute addresses (0xffe90000 and
- * 0xffeb0000) and convert to the expected relative addresses
- * (0x0 and 0x20000).
- */
- if (mem->da == 0x90000 || mem->da == 0xB0000)
- mem->da -= 0x90000;
-
- /* if translated TCM bank address is not valid report error */
- if (mem->da != 0x0 && mem->da != 0x20000) {
- dev_err(&rproc->dev, "invalid TCM address: %x\n", mem->da);
- return -EINVAL;
- }
return 0;
}
@@ -579,6 +557,7 @@ static int add_tcm_carveout_split_mode(struct rproc *rproc)
u32 pm_domain_id;
size_t bank_size;
char *bank_name;
+ u32 da;
r5_core = rproc->priv;
dev = r5_core->dev;
@@ -591,6 +570,7 @@ static int add_tcm_carveout_split_mode(struct rproc *rproc)
*/
for (i = 0; i < num_banks; i++) {
bank_addr = r5_core->tcm_banks[i]->addr;
+ da = r5_core->tcm_banks[i]->da;
bank_name = r5_core->tcm_banks[i]->bank_name;
bank_size = r5_core->tcm_banks[i]->size;
pm_domain_id = r5_core->tcm_banks[i]->pm_domain_id;
@@ -603,11 +583,11 @@ static int add_tcm_carveout_split_mode(struct rproc
*rproc)
goto release_tcm_split;
}
- dev_dbg(dev, "TCM carveout split mode %s addr=%llx, size=0x%lx",
- bank_name, bank_addr, bank_size);
+ dev_dbg(dev, "TCM carveout split mode %s addr=%llx, da=0x%x,
size=0x%lx",
+ bank_name, bank_addr, da, bank_size);
rproc_mem = rproc_mem_entry_init(dev, NULL, bank_addr,
- bank_size, bank_addr,
+ bank_size, da,
tcm_mem_map, tcm_mem_unmap,
bank_name);
if (!rproc_mem) {
@@ -648,6 +628,7 @@ static int add_tcm_carveout_lockstep_mode(struct rproc
*rproc)
struct device *dev;
u32 pm_domain_id;
char *bank_name;
+ u32 da;
r5_core = rproc->priv;
dev = r5_core->dev;
@@ -679,11 +660,12 @@ static int add_tcm_carveout_lockstep_mode(struct rproc
*rproc)
continue;
bank_addr = r5_core->tcm_banks[i]->addr;
+ da = r5_core->tcm_banks[i]->da;
bank_name = r5_core->tcm_banks[i]->bank_name;
/* Register TCM address range, TCM map and unmap functions */
rproc_mem = rproc_mem_entry_init(dev, NULL, bank_addr,
- bank_size, bank_addr,
+ bank_size, da,
tcm_mem_map, tcm_mem_unmap,
bank_name);
if (!rproc_mem) {
@@ -695,8 +677,8 @@ static int add_tcm_carveout_lockstep_mode(struct rproc
*rproc)
/* If registration is success, add carveouts */
rproc_add_carveout(rproc, rproc_mem);
- dev_dbg(dev, "TCM add carveout lockstep mode %s addr=0x%llx,
size=0x%lx",
- bank_name, bank_addr, bank_size);
+ dev_dbg(dev, "TCM carveout lockstep mode %s addr=0x%llx,
da=0x%x, size=0x%lx",
+ bank_name, bank_addr, da, bank_size);
}
return 0;
base-commit: 1a93ced18d7b81be39beba26b1c168ef21c8d0ad
--
2.25.1
