On Mon Oct 30, 2023 at 8:20 PM EET, Haitao Huang wrote: > The scripts rely on cgroup-tools package from libcgroup [1]. > > To run selftests for epc cgroup: > > sudo ./run_epc_cg_selftests.sh > > With different cgroups, the script starts one or multiple concurrent SGX > selftests, each to run one unclobbered_vdso_oversubscribed test. Each > of such test tries to load an enclave of EPC size equal to the EPC > capacity available on the platform. The script checks results against > the expectation set for each cgroup and reports success or failure. > > The script creates 3 different cgroups at the beginning with following > expectations: > > 1) SMALL - intentionally small enough to fail the test loading an > enclave of size equal to the capacity. > 2) LARGE - large enough to run up to 4 concurrent tests but fail some if > more than 4 concurrent tests are run. The script starts 4 expecting at > least one test to pass, and then starts 5 expecting at least one test > to fail. > 3) LARGER - limit is the same as the capacity, large enough to run lots of > concurrent tests. The script starts 10 of them and expects all pass. > Then it reruns the same test with one process randomly killed and > usage checked to be zero after all process exit. > > To watch misc cgroup 'current' changes during testing, run this in a > separate terminal: > > ./watch_misc_for_tests.sh current > > [1] https://github.com/libcgroup/libcgroup/blob/main/README > > Signed-off-by: Haitao Huang <haitao.hu...@linux.intel.com> > --- > V5: > > - Added script with automatic results checking, remove the interactive > script. > - The script can run independent from the series below. > --- > .../selftests/sgx/run_epc_cg_selftests.sh | 196 ++++++++++++++++++ > .../selftests/sgx/watch_misc_for_tests.sh | 13 ++ > 2 files changed, 209 insertions(+) > create mode 100755 tools/testing/selftests/sgx/run_epc_cg_selftests.sh > create mode 100755 tools/testing/selftests/sgx/watch_misc_for_tests.sh > > diff --git a/tools/testing/selftests/sgx/run_epc_cg_selftests.sh > b/tools/testing/selftests/sgx/run_epc_cg_selftests.sh > new file mode 100755 > index 000000000000..72b93f694753 > --- /dev/null > +++ b/tools/testing/selftests/sgx/run_epc_cg_selftests.sh > @@ -0,0 +1,196 @@ > +#!/bin/bash > +# SPDX-License-Identifier: GPL-2.0 > +# Copyright(c) 2023 Intel Corporation. > + > +TEST_ROOT_CG=selftest > +cgcreate -g misc:$TEST_ROOT_CG > +if [ $? -ne 0 ]; then > + echo "# Please make sure cgroup-tools is installed, and misc cgroup is > mounted." > + exit 1 > +fi > +TEST_CG_SUB1=$TEST_ROOT_CG/test1 > +TEST_CG_SUB2=$TEST_ROOT_CG/test2 > +TEST_CG_SUB3=$TEST_ROOT_CG/test1/test3 > +TEST_CG_SUB4=$TEST_ROOT_CG/test4 > + > +cgcreate -g misc:$TEST_CG_SUB1 > +cgcreate -g misc:$TEST_CG_SUB2 > +cgcreate -g misc:$TEST_CG_SUB3 > +cgcreate -g misc:$TEST_CG_SUB4 > + > +# Default to V2 > +CG_ROOT=/sys/fs/cgroup > +if [ ! -d "/sys/fs/cgroup/misc" ]; then > + echo "# cgroup V2 is in use." > +else > + echo "# cgroup V1 is in use." > + CG_ROOT=/sys/fs/cgroup/misc > +fi
Does the test need to support v1 cgroups? > + > +CAPACITY=$(grep "sgx_epc" "$CG_ROOT/misc.capacity" | awk '{print $2}') > +# This is below number of VA pages needed for enclave of capacity size. So > +# should fail oversubscribed cases > +SMALL=$(( CAPACITY / 512 )) > + > +# At least load one enclave of capacity size successfully, maybe up to 4. > +# But some may fail if we run more than 4 concurrent enclaves of capacity > size. > +LARGE=$(( SMALL * 4 )) > + > +# Load lots of enclaves > +LARGER=$CAPACITY > +echo "# Setting up limits." > +echo "sgx_epc $SMALL" | tee $CG_ROOT/$TEST_CG_SUB1/misc.max > +echo "sgx_epc $LARGE" | tee $CG_ROOT/$TEST_CG_SUB2/misc.max > +echo "sgx_epc $LARGER" | tee $CG_ROOT/$TEST_CG_SUB4/misc.max > + > +timestamp=$(date +%Y%m%d_%H%M%S) > + > +test_cmd="./test_sgx -t unclobbered_vdso_oversubscribed" > + > +echo "# Start unclobbered_vdso_oversubscribed with SMALL limit, expecting > failure..." > +# Always use leaf node of misc cgroups so it works for both v1 and v2 > +# these may fail on OOM > +cgexec -g misc:$TEST_CG_SUB3 $test_cmd >cgtest_small_$timestamp.log 2>&1 > +if [[ $? -eq 0 ]]; then > + echo "# Fail on SMALL limit, not expecting any test passes." > + cgdelete -r -g misc:$TEST_ROOT_CG > + exit 1 > +else > + echo "# Test failed as expected." > +fi > + > +echo "# PASSED SMALL limit." > + > +echo "# Start 4 concurrent unclobbered_vdso_oversubscribed tests with LARGE > limit, > + expecting at least one success...." > +pids=() > +for i in {1..4}; do > + ( > + cgexec -g misc:$TEST_CG_SUB2 $test_cmd > >cgtest_large_positive_$timestamp.$i.log 2>&1 > + ) & > + pids+=($!) > +done > + > +any_success=0 > +for pid in "${pids[@]}"; do > + wait "$pid" > + status=$? > + if [[ $status -eq 0 ]]; then > + any_success=1 > + echo "# Process $pid returned successfully." > + fi > +done > + > +if [[ $any_success -eq 0 ]]; then > + echo "# Failed on LARGE limit positive testing, no test passes." > + cgdelete -r -g misc:$TEST_ROOT_CG > + exit 1 > +fi > + > +echo "# PASSED LARGE limit positive testing." > + > +echo "# Start 5 concurrent unclobbered_vdso_oversubscribed tests with LARGE > limit, > + expecting at least one failure...." > +pids=() > +for i in {1..5}; do > + ( > + cgexec -g misc:$TEST_CG_SUB2 $test_cmd > >cgtest_large_negative_$timestamp.$i.log 2>&1 > + ) & > + pids+=($!) > +done > + > +any_failure=0 > +for pid in "${pids[@]}"; do > + wait "$pid" > + status=$? > + if [[ $status -ne 0 ]]; then > + echo "# Process $pid returned failure." > + any_failure=1 > + fi > +done > + > +if [[ $any_failure -eq 0 ]]; then > + echo "# Failed on LARGE limit negative testing, no test fails." > + cgdelete -r -g misc:$TEST_ROOT_CG > + exit 1 > +fi > + > +echo "# PASSED LARGE limit negative testing." > + > +echo "# Start 10 concurrent unclobbered_vdso_oversubscribed tests with > LARGER limit, > + expecting no failure...." > +pids=() > +for i in {1..10}; do > + ( > + cgexec -g misc:$TEST_CG_SUB4 $test_cmd > >cgtest_larger_$timestamp.$i.log 2>&1 > + ) & > + pids+=($!) > +done > + > +any_failure=0 > +for pid in "${pids[@]}"; do > + wait "$pid" > + status=$? > + if [[ $status -ne 0 ]]; then > + echo "# Process $pid returned failure." > + any_failure=1 > + fi > +done > + > +if [[ $any_failure -ne 0 ]]; then > + echo "# Failed on LARGER limit, at least one test fails." > + cgdelete -r -g misc:$TEST_ROOT_CG > + exit 1 > +fi > + > +echo "# PASSED LARGER limit tests." > + > + > +echo "# Start 10 concurrent unclobbered_vdso_oversubscribed tests with > LARGER limit, > + randomly kill one, expecting no failure...." > +pids=() > +for i in {1..10}; do > + ( > + cgexec -g misc:$TEST_CG_SUB4 $test_cmd > >cgtest_larger_$timestamp.$i.log 2>&1 > + ) & > + pids+=($!) > +done > + > +sleep $((RANDOM % 10 + 5)) > + > +# Randomly select a PID to kill > +RANDOM_INDEX=$((RANDOM % 10)) > +PID_TO_KILL=${pids[RANDOM_INDEX]} > + > +kill $PID_TO_KILL > +echo "# Killed process with PID: $PID_TO_KILL" > + > +any_failure=0 > +for pid in "${pids[@]}"; do > + wait "$pid" > + status=$? > + if [ "$pid" != "$PID_TO_KILL" ]; then > + if [[ $status -ne 0 ]]; then > + echo "# Process $pid returned failure." > + any_failure=1 > + fi > + fi > +done > + > +if [[ $any_failure -ne 0 ]]; then > + echo "# Failed on random killing, at least one test fails." > + cgdelete -r -g misc:$TEST_ROOT_CG > + exit 1 > +fi > + > +sleep 1 > + > +USAGE=$(grep '^sgx_epc' "$CG_ROOT/$TEST_ROOT_CG/misc.current" | awk '{print > $2}') > +if [ "$USAGE" -ne 0 ]; then > + echo "# Failed: Final usage is $USAGE, not 0." > +else > + echo "# PASSED leakage check." > + echo "# PASSED ALL cgroup limit tests, cleanup cgroups..." > +fi > +cgdelete -r -g misc:$TEST_ROOT_CG > +echo "# done." > diff --git a/tools/testing/selftests/sgx/watch_misc_for_tests.sh > b/tools/testing/selftests/sgx/watch_misc_for_tests.sh > new file mode 100755 > index 000000000000..dbd38f346e7b > --- /dev/null > +++ b/tools/testing/selftests/sgx/watch_misc_for_tests.sh > @@ -0,0 +1,13 @@ > +#!/bin/bash > +# SPDX-License-Identifier: GPL-2.0 > +# Copyright(c) 2023 Intel Corporation. > + > +if [ -z "$1" ] > + then > + echo "No argument supplied, please provide 'max', 'current' or 'events'" > + exit 1 > +fi > + > +watch -n 1 "find /sys/fs/cgroup -wholename */test*/misc.$1 -exec sh -c \ > + 'echo \"\$1:\"; cat \"\$1\"' _ {} \;" > + BR, Jarkko