[PATCH] arm64: dts: qcom: sdm632-fairphone-fp3: enable USB-C port handling

[Luca Weiss]

Add the definition for the USB-C connector found on this phone and hook
up the relevant bits. This enables USB role switching.

Signed-off-by: Luca Weiss <luca.we...@fairphone.com>
---
 arch/arm64/boot/dts/qcom/msm8953.dtsi             | 14 ++++++++++
 arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts | 31 +++++++++++++++++++++--
 2 files changed, 43 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi 
b/arch/arm64/boot/dts/qcom/msm8953.dtsi
index 383657407c6f..6726d15c38c3 100644
--- a/arch/arm64/boot/dts/qcom/msm8953.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi
@@ -1330,6 +1330,20 @@ usb3_dwc3: usb@7000000 {
                                snps,hird-threshold = /bits/ 8 <0x00>;
 
                                maximum-speed = "high-speed";
+
+                               usb-role-switch;
+
+                               ports {
+                                       #address-cells = <1>;
+                                       #size-cells = <0>;
+
+                                       port@0 {
+                                               reg = <0>;
+
+                                               usb_dwc3_hs: endpoint {
+                                               };
+                                       };
+                               };
                        };
                };
 
diff --git a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts 
b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
index c49a196189e3..2a65849f0da2 100644
--- a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
+++ b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
@@ -162,6 +162,33 @@ led@3 {
        };
 };
 
+&pmi632_typec {
+       status = "okay";
+
+       connector {
+               compatible = "usb-c-connector";
+
+               power-role = "dual";
+               data-role = "dual";
+               self-powered;
+
+               typec-power-opmode = "default";
+               pd-disable;
+
+               port {
+                       pmi632_hs_in: endpoint {
+                               remote-endpoint = <&usb_dwc3_hs>;
+                       };
+               };
+       };
+};
+
+&pmi632_vbus {
+       regulator-min-microamp = <500000>;
+       regulator-max-microamp = <1000000>;
+       status = "okay";
+};
+
 &sdhc_1 {
        status = "okay";
        vmmc-supply = <&pm8953_l8>;
@@ -286,8 +313,8 @@ &usb3 {
        status = "okay";
 };
 
-&usb3_dwc3 {
-       dr_mode = "peripheral";
+&usb_dwc3_hs {
+       remote-endpoint = <&pmi632_hs_in>;
 };
 
 &wcnss {

---
base-commit: 103eb8e019aefd616735200ce46833bc74cfe132
change-id: 20240220-fp3-typec-25eb002db8b5

Best regards,
-- 
Luca Weiss <luca.we...@fairphone.com>