Hi Sudeep,
> > + extsys0: remoteproc@1a010310 {
> > + compatible = "arm,corstone1000-extsys";
> > + reg = <0x1a010310 0x4>,
> > + <0x1a010314 0X4>;
>
>
> As per [1], this is just a few registers within the 64kB block.
> Not sure if it should be represented as a whole on just couple
> of registers like this for reset.
>
> [1]
> https://developer.arm.com/documentation/101418/0100/Programmers-model/Register-descriptions/Host-Base-System-Control-register-summary
The Host Base System Control registers are not specific to the External System
processors. They are various registers with different purposes.
Only 4 registers matter for the remoteproc feature:
- The External system 0 reset control and status registers:
EXT_SYS0_RST_CTRL, EXT_SYS0_RST_ST
- Same for the the External system 1: EXT_SYS1_RST_CTRL, EXT_SYS1_RST_ST
So, mapping the whole Host Base System Control area doesn't make sense for the
remoteproc feature
and exposes registers that are not related to the External Systems to the
driver.
By the way, the latest document we are referring to is [1].
[1]:
https://developer.arm.com/documentation/102342/0000/Programmers-model/Register-descriptions/Host-Base-System-Control-register-summary
Cheers,
Abdellatif
