On Sonntag, 10. März 2024 12:41:09 CET Luca Weiss wrote:
> Add the dts for the Xperia Z3 smartphone which is based on Sony's
> shinano platform, so at the moment there's little device-specific dts to
> add on top of the common parts.
>
> Signed-off-by: Luca Weiss <l...@z3ntu.xyz>
> ---
> .../qcom-msm8974pro-sony-xperia-shinano-leo.dts | 44 +++++++++++++++++++
+++
> 1 file changed, 44 insertions(+)
Of course I forgot to add the dtb to the Makefile...
Apparently "make qcom/qcom-msm8974pro-sony-xperia-shinano-leo.dtb" doesn't
care about whether the dtb is in the Makefile so I didn't notice.
Will fix in v2 but I'm going to wait for any comments on this or the other
patches for at least a day or so.
Regards
Luca
>
> diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-
leo.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-leo.dts
> new file mode 100644
> index 000000000000..1ed6e1cc21d5
> --- /dev/null
> +++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-leo.dts
> @@ -0,0 +1,44 @@
> +// SPDX-License-Identifier: GPL-2.0
> +#include "qcom-msm8974pro-sony-xperia-shinano-common.dtsi"
> +
> +/ {
> + model = "Sony Xperia Z3";
> + compatible = "sony,xperia-leo", "qcom,msm8974pro", "qcom,msm8974";
> + chassis-type = "handset";
> +
> + gpio-keys {
> + key-camera-snapshot {
> + label = "camera_snapshot";
> + gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_CAMERA>;
> + debounce-interval = <15>;
> + };
> +
> + key-camera-focus {
> + label = "camera_focus";
> + gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_CAMERA_FOCUS>;
> + debounce-interval = <15>;
> + };
> + };
> +};
> +
> +&gpio_keys_pin_a {
> + pins = "gpio2", "gpio3", "gpio4", "gpio5";
> +};
> +
> +&smbb {
> + usb-charge-current-limit = <1500000>;
> + qcom,fast-charge-safe-current = <3000000>;
> + qcom,fast-charge-current-limit = <2150000>;
> + qcom,fast-charge-safe-voltage = <4400000>;
> + qcom,fast-charge-high-threshold-voltage = <4350000>;
> + qcom,auto-recharge-threshold-voltage = <4280000>;
> + qcom,minimum-input-voltage = <4200000>;
> +
> + status = "okay";
> +};
> +
> +&synaptics_touchscreen {
> + vio-supply = <&pm8941_s3>;
> +};
>
>
