Hi Pavel, I'm sorry to keep you waiting.
On Fri, Feb 23, 2024 at 10:28:49PM +0100, Pavel Machek wrote: > From: Ondrej Jirman <m...@xff.cz> > > This is driver for ANX7688 USB-C HDMI, with flashing and debugging > features removed. ANX7688 is rather criticial piece on PinePhone, > there's no display and no battery charging without it. > > There's likely more work to be done here, but having basic support > in mainline is needed to be able to work on the other stuff > (networking, cameras, power management). > > Signed-off-by: Ondrej Jirman <m...@xff.cz> > Co-developed-by: Martijn Braam <mart...@brixit.nl> > Co-developed-by: Samuel Holland <sam...@sholland.org> > Signed-off-by: Pavel Machek <pa...@ucw.cz> > > --- > > v2: Fix checkpatch stuff. Some cleanups, adapt to dts format in 1/2. > > diff --git a/drivers/usb/typec/Kconfig b/drivers/usb/typec/Kconfig > index 2f80c2792dbd..c9043ae61546 100644 > --- a/drivers/usb/typec/Kconfig > +++ b/drivers/usb/typec/Kconfig > @@ -64,6 +64,17 @@ config TYPEC_ANX7411 > If you choose to build this driver as a dynamically linked module, the > module will be called anx7411.ko. > > +config TYPEC_ANX7688 > + tristate "Analogix ANX7688 Type-C DRP Port controller and mux driver" > + depends on I2C > + depends on USB_ROLE_SWITCH > + help > + Say Y or M here if your system has Analogix ANX7688 Type-C Bridge > + controller driver. > + > + If you choose to build this driver as a dynamically linked module, the > + module will be called anx7688.ko. > + > config TYPEC_RT1719 > tristate "Richtek RT1719 Sink Only Type-C controller driver" > depends on USB_ROLE_SWITCH || !USB_ROLE_SWITCH > diff --git a/drivers/usb/typec/Makefile b/drivers/usb/typec/Makefile > index 7a368fea61bc..3f8ff94ad294 100644 > --- a/drivers/usb/typec/Makefile > +++ b/drivers/usb/typec/Makefile > @@ -7,6 +7,7 @@ obj-$(CONFIG_TYPEC_TCPM) += tcpm/ > obj-$(CONFIG_TYPEC_UCSI) += ucsi/ > obj-$(CONFIG_TYPEC_TPS6598X) += tipd/ > obj-$(CONFIG_TYPEC_ANX7411) += anx7411.o > +obj-$(CONFIG_TYPEC_ANX7688) += anx7688.o > obj-$(CONFIG_TYPEC_HD3SS3220) += hd3ss3220.o > obj-$(CONFIG_TYPEC_STUSB160X) += stusb160x.o > obj-$(CONFIG_TYPEC_RT1719) += rt1719.o > diff --git a/drivers/usb/typec/anx7688.c b/drivers/usb/typec/anx7688.c > new file mode 100644 > index 000000000000..14d033bbc0c7 > --- /dev/null > +++ b/drivers/usb/typec/anx7688.c > @@ -0,0 +1,1927 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * ANX7688 USB-C HDMI bridge/PD driver > + * > + * Warning, this driver is somewhat PinePhone specific. > + * > + * How this works: > + * - this driver allows to program firmware into ANX7688 EEPROM, and > + * initialize it > + * - it then communicates with the firmware running on the OCM (on-chip > + * microcontroller) > + * - it detects whether there is cable plugged in or not and powers > + * up or down the ANX7688 based on that > + * - when the cable is connected the firmware on the OCM will handle > + * the detection of the nature of the device on the other end > + * of the USB-C cable > + * - this driver then communicates with the USB phy to let it swap > + * data roles accordingly > + * - it also enables VBUS and VCONN regulators as appropriate > + * - USB phy driver (Allwinner) needs to know whether to switch to > + * device or host mode, or whether to turn off > + * - when the firmware detects SRC.1.5A or SRC.3.0A via CC pins > + * or something else via PD, it notifies this driver via software > + * interrupt and this driver will determine how to update the TypeC > + * port status and what input current limit is appropriate > + * - input current limit determination happens 500ms after cable > + * insertion or hard reset (delay is necessary to determine whether > + * the remote end is PD capable or not) > + * - this driver tells to the PMIC driver that the input current limit > + * needs to be changed > + * - this driver also monitors PMIC status and re-sets the input current > + * limit if it changes for some reason (due to PMIC internal decision > + * making) (this is disabled for now) > + * > + * ANX7688 FW behavior as observed: > + * > + * - DO NOT SET MORE THAN 1 SINK CAPABILITY! Firmware will ignore what > + * you set and send hardcoded PDO_BATT 5-21V 30W message! > + * > + * Product brief: > + * > https://www.analogix.com/en/system/files/AA-002281-PB-6-ANX7688_Product_Brief_0.pdf > + * Development notes: > + * https://xnux.eu/devices/feature/anx7688.html > + */ > + > +#include <linux/debugfs.h> > +#include <linux/delay.h> > +#include <linux/extcon-provider.h> > +#include <linux/firmware.h> > +#include <linux/gpio/consumer.h> > +#include <linux/i2c.h> > +#include <linux/interrupt.h> > +#include <linux/irqreturn.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/of_irq.h> > +#include <linux/power_supply.h> > +#include <linux/regulator/consumer.h> > +#include <linux/usb/pd.h> > +#include <linux/usb/role.h> > +#include <linux/usb/typec.h> > + > +/* firmware regs */ > + > +#define ANX7688_REG_VBUS_OFF_DELAY_TIME 0x22 > +#define ANX7688_REG_FEATURE_CTRL 0x27 > +#define ANX7688_REG_EEPROM_LOAD_STATUS1 0x11 > +#define ANX7688_REG_EEPROM_LOAD_STATUS0 0x12 > +#define ANX7688_REG_FW_VERSION1 0x15 > +#define ANX7688_REG_FW_VERSION0 0x16 > + > +#define ANX7688_EEPROM_FW_LOADED 0x01 > + > +#define ANX7688_REG_STATUS_INT_MASK 0x17 > +#define ANX7688_REG_STATUS_INT 0x28 > +#define ANX7688_IRQS_RECEIVED_MSG BIT(0) > +#define ANX7688_IRQS_RECEIVED_ACK BIT(1) > +#define ANX7688_IRQS_VCONN_CHANGE BIT(2) > +#define ANX7688_IRQS_VBUS_CHANGE BIT(3) > +#define ANX7688_IRQS_CC_STATUS_CHANGE BIT(4) > +#define ANX7688_IRQS_DATA_ROLE_CHANGE BIT(5) > + > +#define ANX7688_REG_STATUS 0x29 > +#define ANX7688_VCONN_STATUS BIT(2) /* 0 = off 1 = on */ > +#define ANX7688_VBUS_STATUS BIT(3) /* 0 = off 1 = on */ > +#define ANX7688_DATA_ROLE_STATUS BIT(5) /* 0 = device 1 = host */ > + > +#define ANX7688_REG_CC_STATUS 0x2a > +#define ANX7688_REG_TRY_UFP_TIMER 0x23 > +#define ANX7688_REG_TIME_CTRL 0x24 > + > +#define ANX7688_REG_MAX_VOLTAGE 0x1b > +#define ANX7688_REG_MAX_POWER 0x1c > +#define ANX7688_REG_MIN_POWER 0x1d > +#define ANX7688_REG_MAX_VOLTAGE_STATUS 0x1e > +#define ANX7688_REG_MAX_POWER_STATUS 0x1f > + > +#define ANX7688_SOFT_INT_MASK 0x7f > + > +/* tcpc regs */ > + > +#define ANX7688_TCPC_REG_VENDOR_ID0 0x00 > +#define ANX7688_TCPC_REG_VENDOR_ID1 0x01 > +#define ANX7688_TCPC_REG_ALERT0 0x10 > +#define ANX7688_TCPC_REG_ALERT1 0x11 > +#define ANX7688_TCPC_REG_ALERT_MASK0 0x12 > +#define ANX7688_TCPC_REG_ALERT_MASK1 0x13 > +#define ANX7688_TCPC_REG_INTERFACE_SEND 0x30 > +#define ANX7688_TCPC_REG_INTERFACE_RECV 0x51 > + > +/* hw regs */ > + > +#define ANX7688_REG_IRQ_EXT_SOURCE0 0x3e > +#define ANX7688_REG_IRQ_EXT_SOURCE1 0x4e > +#define ANX7688_REG_IRQ_EXT_SOURCE2 0x4f > +#define ANX7688_REG_IRQ_EXT_MASK0 0x3b > +#define ANX7688_REG_IRQ_EXT_MASK1 0x3c > +#define ANX7688_REG_IRQ_EXT_MASK2 0x3d > +#define ANX7688_REG_IRQ_SOURCE0 0x54 > +#define ANX7688_REG_IRQ_SOURCE1 0x55 > +#define ANX7688_REG_IRQ_SOURCE2 0x56 > +#define ANX7688_REG_IRQ_MASK0 0x57 > +#define ANX7688_REG_IRQ_MASK1 0x58 > +#define ANX7688_REG_IRQ_MASK2 0x59 > + > +#define ANX7688_IRQ2_SOFT_INT BIT(2) > + > +#define ANX7688_REG_USBC_RESET_CTRL 0x05 > +#define ANX7688_USBC_RESET_CTRL_OCM_RESET BIT(4) > + > +/* ocm messages */ > + > +#define ANX7688_OCM_MSG_PWR_SRC_CAP 0x00 > +#define ANX7688_OCM_MSG_PWR_SNK_CAP 0x01 > +#define ANX7688_OCM_MSG_DP_SNK_IDENTITY 0x02 > +#define ANX7688_OCM_MSG_SVID 0x03 > +#define ANX7688_OCM_MSG_GET_DP_SNK_CAP 0x04 > +#define ANX7688_OCM_MSG_ACCEPT 0x05 > +#define ANX7688_OCM_MSG_REJECT 0x06 > +#define ANX7688_OCM_MSG_PSWAP_REQ 0x10 > +#define ANX7688_OCM_MSG_DSWAP_REQ 0x11 > +#define ANX7688_OCM_MSG_GOTO_MIN_REQ 0x12 > +#define ANX7688_OCM_MSG_VCONN_SWAP_REQ 0x13 > +#define ANX7688_OCM_MSG_VDM 0x14 > +#define ANX7688_OCM_MSG_DP_SNK_CFG 0x15 > +#define ANX7688_OCM_MSG_PWR_OBJ_REQ 0x16 > +#define ANX7688_OCM_MSG_PD_STATUS_REQ 0x17 > +#define ANX7688_OCM_MSG_DP_ALT_ENTER 0x19 > +#define ANX7688_OCM_MSG_DP_ALT_EXIT 0x1a > +#define ANX7688_OCM_MSG_GET_SNK_CAP 0x1b > +#define ANX7688_OCM_MSG_RESPONSE_TO_REQ 0xf0 > +#define ANX7688_OCM_MSG_SOFT_RST 0xf1 > +#define ANX7688_OCM_MSG_HARD_RST 0xf2 > +#define ANX7688_OCM_MSG_RESTART 0xf3 > + > +static const char * const anx7688_supply_names[] = { > + "avdd33", > + "avdd18", > + "dvdd18", > + "avdd10", > + "dvdd10", > + "i2c", > + "hdmi-vt", > + > + "vconn", // power for VCONN1/VCONN2 switches > + "vbus", // vbus power > +}; > + > +#define ANX7688_NUM_SUPPLIES ARRAY_SIZE(anx7688_supply_names) > +#define ANX7688_NUM_ALWAYS_ON_SUPPLIES (ANX7688_NUM_SUPPLIES - 1) > + > +#define ANX7688_I2C_INDEX (ANX7688_NUM_SUPPLIES - 4) > +#define ANX7688_VCONN_INDEX (ANX7688_NUM_SUPPLIES - 2) > +#define ANX7688_VBUS_INDEX (ANX7688_NUM_SUPPLIES - 1) > + > +enum { > + ANX7688_F_POWERED, > + ANX7688_F_CONNECTED, > + ANX7688_F_FW_FAILED, > + ANX7688_F_PWRSUPPLY_CHANGE, > + ANX7688_F_CURRENT_UPDATE, > +}; > + > +struct anx7688 { > + struct device *dev; > + struct i2c_client *client; > + struct i2c_client *client_tcpc; > + struct regulator_bulk_data supplies[ANX7688_NUM_SUPPLIES]; > + struct power_supply *vbus_in_supply; > + struct notifier_block vbus_in_nb; > + int input_current_limit; // mA > + struct gpio_desc *gpio_enable; > + struct gpio_desc *gpio_reset; > + struct gpio_desc *gpio_cabledet; > + > + uint32_t src_caps[8]; Use u32 instead of uint32_t. > + unsigned int n_src_caps; > + > + uint32_t snk_caps[8]; Ditto. > + unsigned int n_snk_caps; > + > + unsigned long flags[1]; > + > + struct delayed_work work; > + struct timer_list work_timer; > + > + struct mutex lock; > + bool vbus_on, vconn_on; > + bool pd_capable; > + int pd_current_limit; // mA > + ktime_t current_update_deadline; > + > + struct typec_port *port; > + struct typec_partner *partner; > + struct usb_pd_identity partner_identity; > + struct usb_role_switch *role_sw; > + int pwr_role, data_role; > + > + struct dentry *debug_root; > + > + /* for debug */ > + int last_status; > + int last_cc_status; > + int last_dp_state; > + int last_bc_result; > + > + /* for HDMI HPD */ > + struct extcon_dev *extcon; > + int last_extcon_state; > +}; > + > +static const unsigned int anx7688_extcon_cable[] = { > + EXTCON_DISP_HDMI, > + EXTCON_NONE, > +}; > + > +static int anx7688_reg_read(struct anx7688 *anx7688, u8 reg_addr) > +{ > + int ret; > + > + ret = i2c_smbus_read_byte_data(anx7688->client, reg_addr); > + if (ret < 0) > + dev_err(anx7688->dev, "i2c read failed at 0x%x (%d)\n", > + reg_addr, ret); dev_dbg instead. > + > + return ret; > +} > + > +static int anx7688_reg_write(struct anx7688 *anx7688, u8 reg_addr, u8 value) > +{ > + int ret; > + > + ret = i2c_smbus_write_byte_data(anx7688->client, reg_addr, value); > + if (ret < 0) > + dev_err(anx7688->dev, "i2c write failed at 0x%x (%d)\n", > + reg_addr, ret); Ditto. > + > + return ret; > +} > + > +static int anx7688_reg_update_bits(struct anx7688 *anx7688, u8 reg_addr, > + u8 mask, u8 value) > +{ > + int ret; > + > + ret = anx7688_reg_read(anx7688, reg_addr); > + if (ret < 0) > + return ret; > + > + ret &= ~mask; > + ret |= value; > + > + return anx7688_reg_write(anx7688, reg_addr, ret); > +} > + > +static int anx7688_tcpc_reg_read(struct anx7688 *anx7688, u8 reg_addr) > +{ > + int ret; > + > + ret = i2c_smbus_read_byte_data(anx7688->client_tcpc, reg_addr); > + if (ret < 0) > + dev_err(anx7688->dev, "tcpc i2c read failed at 0x%x (%d)\n", > + reg_addr, ret); Ditto. > + > + return ret; > +} > + > +static int anx7688_tcpc_reg_write(struct anx7688 *anx7688, u8 reg_addr, u8 > value) > +{ > + int ret; > + > + ret = i2c_smbus_write_byte_data(anx7688->client_tcpc, reg_addr, value); > + if (ret < 0) > + dev_err(anx7688->dev, "tcpc i2c write failed at 0x%x (%d)\n", > + reg_addr, ret); Ditto. > + > + return ret; > +} > + > +static void anx7688_power_enable(struct anx7688 *anx7688) > +{ > + gpiod_set_value(anx7688->gpio_reset, 1); > + gpiod_set_value(anx7688->gpio_enable, 1); > + > + /* wait for power to stabilize and release reset */ > + msleep(10); So is it okay that the sleep may take up to 20ms? > + gpiod_set_value(anx7688->gpio_reset, 0); > + udelay(2); Use usleep_range() instead. > + dev_dbg(anx7688->dev, "power enabled\n"); > + > + set_bit(ANX7688_F_POWERED, anx7688->flags); > +} > + > +static void anx7688_power_disable(struct anx7688 *anx7688) > +{ > + gpiod_set_value(anx7688->gpio_reset, 1); > + msleep(5); The same question here, is it a problem if the sleep ends up taking 20ms? > + gpiod_set_value(anx7688->gpio_enable, 0); > + > + dev_dbg(anx7688->dev, "power disabled\n"); > + > + clear_bit(ANX7688_F_POWERED, anx7688->flags); > +} > + > +static int anx7688_send_ocm_message(struct anx7688 *anx7688, int cmd, > + const u8 *data, int data_len) > +{ > + int ret = 0, i; > + u8 pkt[32]; > + > + if (data_len > sizeof(pkt) - 3) { > + dev_dbg(anx7688->dev, > + "invalid ocm message length cmd=0x%02x len=%d\n", > + cmd, data_len); > + return -EINVAL; > + } > + > + // prepare pd packet > + pkt[0] = data_len + 1; > + pkt[1] = cmd; > + if (data_len > 0) > + memcpy(pkt + 2, data, data_len); > + pkt[2 + data_len] = 0; > + for (i = 0; i < data_len + 2; i++) > + pkt[data_len + 2] -= pkt[i]; > + > + dev_dbg(anx7688->dev, "send pd packet cmd=0x%02x %*ph\n", > + cmd, data_len + 3, pkt); > + > + ret = anx7688_tcpc_reg_read(anx7688, ANX7688_TCPC_REG_INTERFACE_SEND); > + if (ret) { > + dev_err(anx7688->dev, > + "failed to send pd packet (tx buffer full)\n"); One line should be enought for that one. > + return -EBUSY; > + } > + > + ret = i2c_smbus_write_i2c_block_data(anx7688->client_tcpc, > + ANX7688_TCPC_REG_INTERFACE_SEND, > + data_len + 3, pkt); > + if (ret < 0) > + dev_err(anx7688->dev, > + "failed to send pd packet (err=%d)\n", ret); Ditto. > + // wait until the message is processed (30ms max) > + for (i = 0; i < 300; i++) { > + ret = anx7688_tcpc_reg_read(anx7688, > ANX7688_TCPC_REG_INTERFACE_SEND); > + if (ret <= 0) > + return ret; > + > + udelay(100); > + } > + > + dev_err(anx7688->dev, "timeout waiting for the message queue flush\n"); Maybe dev_dbg for this too. > + return -ETIMEDOUT; > +} > + > +static int anx7688_connect(struct anx7688 *anx7688) > +{ > + struct typec_partner_desc desc = {}; > + int ret, i; > + u8 fw[2]; > + const u8 dp_snk_identity[16] = { > + 0x00, 0x00, 0x00, 0xec, /* id header */ > + 0x00, 0x00, 0x00, 0x00, /* cert stat */ > + 0x00, 0x00, 0x00, 0x00, /* product type */ > + 0x39, 0x00, 0x00, 0x51 /* alt mode adapter */ > + }; > + const u8 svid[4] = { > + 0x00, 0x00, 0x01, 0xff, > + }; > + u32 caps[8]; > + > + dev_dbg(anx7688->dev, "cable inserted\n"); > + > + anx7688->last_status = -1; > + anx7688->last_cc_status = -1; > + anx7688->last_dp_state = -1; > + > + msleep(10); > + anx7688_power_enable(anx7688); > + > + ret = regulator_enable(anx7688->supplies[ANX7688_VCONN_INDEX].consumer); > + if (ret) { > + dev_err(anx7688->dev, "failed to enable vconn\n"); > + goto err_poweroff; > + } > + anx7688->vconn_on = true; > + > + /* wait till the firmware is loaded (typically ~30ms) */ > + for (i = 0; i < 100; i++) { > + ret = anx7688_reg_read(anx7688, > ANX7688_REG_EEPROM_LOAD_STATUS0); > + > + if (ret >= 0 && (ret & ANX7688_EEPROM_FW_LOADED) == > ANX7688_EEPROM_FW_LOADED) { > + dev_dbg(anx7688->dev, "eeprom0 = 0x%02x\n", ret); > + dev_info(anx7688->dev, "fw loaded after %d ms\n", i * > 10); Debugging information. Use dev_dbg. > + goto fw_loaded; > + } > + > + msleep(5); > + } > + > + set_bit(ANX7688_F_FW_FAILED, anx7688->flags); > + dev_err(anx7688->dev, "boot firmware load failed (you may need to flash > FW to anx7688 first)\n"); > + ret = -ETIMEDOUT; > + goto err_vconoff; > + > +fw_loaded: This label looks a bit messy to me. You could also move that firmware loading wait to its own function. > + ret = i2c_smbus_read_i2c_block_data(anx7688->client, > + ANX7688_REG_FW_VERSION1, 2, fw); > + if (ret < 0) { > + dev_err(anx7688->dev, "failed to read firmware version\n"); > + goto err_vconoff; > + } > + > + dev_info(anx7688->dev, "OCM firmware loaded (version 0x%04x)\n", > + fw[1] | fw[0] << 8); deb_dbg. > + /* Unmask interrupts */ > + ret = anx7688_reg_write(anx7688, ANX7688_REG_STATUS_INT, 0); > + if (ret) > + goto err_vconoff; > + > + ret = anx7688_reg_write(anx7688, ANX7688_REG_STATUS_INT_MASK, > ~ANX7688_SOFT_INT_MASK); > + if (ret) > + goto err_vconoff; > + > + ret = anx7688_reg_write(anx7688, ANX7688_REG_IRQ_EXT_SOURCE2, 0xff); > + if (ret) > + goto err_vconoff; > + > + ret = anx7688_reg_write(anx7688, ANX7688_REG_IRQ_EXT_MASK2, > (u8)~ANX7688_IRQ2_SOFT_INT); > + if (ret) > + goto err_vconoff; > + > + /* time to turn off vbus after cc disconnect (unit is 4 ms) */ > + ret = anx7688_reg_write(anx7688, ANX7688_REG_VBUS_OFF_DELAY_TIME, 100 / > 4); > + if (ret) > + goto err_vconoff; > + > + /* 300ms (unit is 2 ms) */ > + ret = anx7688_reg_write(anx7688, ANX7688_REG_TRY_UFP_TIMER, 300 / 2); > + if (ret) > + goto err_vconoff; > + > + /* maximum voltage in 100 mV units */ > + ret = anx7688_reg_write(anx7688, ANX7688_REG_MAX_VOLTAGE, 50); /* 5 V */ > + if (ret) > + goto err_vconoff; > + > + /* min/max power in 500 mW units */ > + ret = anx7688_reg_write(anx7688, ANX7688_REG_MAX_POWER, 15 * 2); /* 15 > W */ > + if (ret) > + goto err_vconoff; > + > + ret = anx7688_reg_write(anx7688, ANX7688_REG_MIN_POWER, 1); /* 0.5 W */ > + if (ret) > + goto err_vconoff; > + > + /* auto_pd, try.src, try.sink, goto safe 5V */ > + ret = anx7688_reg_write(anx7688, ANX7688_REG_FEATURE_CTRL, 0x1e & > ~BIT(2)); // disable try_src > + if (ret) > + goto err_vconoff; > + > + for (i = 0; i < anx7688->n_src_caps; i++) > + caps[i] = cpu_to_le32(anx7688->src_caps[i]); > + ret = anx7688_send_ocm_message(anx7688, ANX7688_OCM_MSG_PWR_SRC_CAP, > + (u8 *)&caps, 4 * anx7688->n_src_caps); > + if (ret) > + goto err_vconoff; > + > + for (i = 0; i < anx7688->n_snk_caps; i++) > + caps[i] = cpu_to_le32(anx7688->snk_caps[i]); > + ret = anx7688_send_ocm_message(anx7688, ANX7688_OCM_MSG_PWR_SNK_CAP, > + (u8 *)&caps, 4 * anx7688->n_snk_caps); > + if (ret) > + goto err_vconoff; > + > + /* Send DP SNK identity */ > + ret = anx7688_send_ocm_message(anx7688, ANX7688_OCM_MSG_DP_SNK_IDENTITY, > + dp_snk_identity, > sizeof(dp_snk_identity)); > + if (ret) > + goto err_vconoff; > + > + ret = anx7688_send_ocm_message(anx7688, ANX7688_OCM_MSG_SVID, > + svid, sizeof(svid)); > + if (ret) > + goto err_vconoff; > + > + dev_dbg(anx7688->dev, "OCM configuration completed\n"); > + > + desc.accessory = TYPEC_ACCESSORY_NONE; > + > + typec_unregister_partner(anx7688->partner); > + > + anx7688->partner = typec_register_partner(anx7688->port, &desc); > + if (IS_ERR(anx7688->partner)) { > + ret = PTR_ERR(anx7688->partner); > + goto err_vconoff; > + } > + > + // after this deadline passes we'll check if device is pd_capable and > + // set up the current limit accordingly > + anx7688->current_update_deadline = ktime_add_ms(ktime_get(), 3000); > + > + set_bit(ANX7688_F_CONNECTED, anx7688->flags); > + return 0; > + > +err_vconoff: > + regulator_disable(anx7688->supplies[ANX7688_VCONN_INDEX].consumer); > + anx7688->vconn_on = false; > +err_poweroff: > + anx7688_power_disable(anx7688); > + dev_err(anx7688->dev, "OCM configuration failed\n"); > + return ret; > +} > + > +static void anx7688_set_hdmi_hpd(struct anx7688 *anx7688, int state) > +{ > + if (!anx7688->extcon) > + return; > + > + if (anx7688->last_extcon_state != state) { > + extcon_set_state_sync(anx7688->extcon, EXTCON_DISP_HDMI, state); > + anx7688->last_extcon_state = state; > + } > +} > + > +static void anx7688_disconnect(struct anx7688 *anx7688) > +{ > + union power_supply_propval val = {0,}; > + struct device *dev = anx7688->dev; > + int ret; > + > + dev_dbg(dev, "cable removed\n"); > + > + anx7688->current_update_deadline = 0; > + > + anx7688_set_hdmi_hpd(anx7688, 0); > + > + if (anx7688->vconn_on) { > + > regulator_disable(anx7688->supplies[ANX7688_VCONN_INDEX].consumer); > + anx7688->vconn_on = false; > + } > + > + if (anx7688->vbus_on) { > + > regulator_disable(anx7688->supplies[ANX7688_VBUS_INDEX].consumer); > + anx7688->vbus_on = false; > + } > + > + anx7688_power_disable(anx7688); > + > + anx7688->pd_capable = false; > + > + typec_unregister_partner(anx7688->partner); > + anx7688->partner = NULL; > + > + anx7688->pwr_role = TYPEC_SINK; > + anx7688->data_role = TYPEC_DEVICE; > + typec_set_pwr_role(anx7688->port, anx7688->pwr_role); > + typec_set_data_role(anx7688->port, anx7688->data_role); > + typec_set_pwr_opmode(anx7688->port, TYPEC_PWR_MODE_USB); > + typec_set_vconn_role(anx7688->port, TYPEC_SINK); > + > + usb_role_switch_set_role(anx7688->role_sw, USB_ROLE_NONE); > + > + val.intval = 500 * 1000; > + dev_dbg(dev, "setting vbus_in current limit to %d mA\n", val.intval); > + ret = power_supply_set_property(anx7688->vbus_in_supply, > + POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT, > + &val); > + if (ret) > + dev_err(dev, "failed to set vbus_in current to %d mA\n", > + val.intval / 1000); > + > + val.intval = 0; > + dev_dbg(dev, "disabling vbus_in power path\n"); > + ret = power_supply_set_property(anx7688->vbus_in_supply, > + POWER_SUPPLY_PROP_ONLINE, > + &val); > + if (ret) > + dev_err(dev, "failed to offline vbus_in\n"); > + > + dev_dbg(dev, "enabling USB BC 1.2 detection\n"); > + > + clear_bit(ANX7688_F_CONNECTED, anx7688->flags); > +} > + > +static void anx7688_handle_cable_change(struct anx7688 *anx7688) > +{ > + int cabledet; > + bool connected; > + > + connected = test_bit(ANX7688_F_CONNECTED, anx7688->flags); > + cabledet = gpiod_get_value(anx7688->gpio_cabledet); > + > + if (cabledet && !connected) > + anx7688_connect(anx7688); > + else if (!cabledet && connected) > + anx7688_disconnect(anx7688); > +} > + > +static irqreturn_t anx7688_irq_plug_handler(int irq, void *data) > +{ > + struct anx7688 *anx7688 = data; > + > + dev_dbg(anx7688->dev, "plug irq (cd=%d)\n", > + gpiod_get_value(anx7688->gpio_cabledet)); > + > + /* > + * After each cabledet change the scheduled work timer is reset > + * to fire in ~10ms. So the work is done only after the cabledet > + * is stable for ~10ms. > + */ > + schedule_delayed_work(&anx7688->work, msecs_to_jiffies(10)); > + > + return IRQ_HANDLED; > +} > + > +enum { > + CMD_SUCCESS, > + CMD_REJECT, > + CMD_FAIL, > + CMD_BUSY, > +}; > + > +static const char * const anx7688_cmd_statuses[] = { > + "SUCCESS", > + "REJECT", > + "FAIL", > + "BUSY", > +}; > + > +static int anx7688_handle_pd_message_response(struct anx7688 *anx7688, > + u8 to_cmd, u8 resp) > +{ > + const char *status = resp <= CMD_BUSY ? anx7688_cmd_statuses[resp] : > "UNKNOWN"; > + > + switch (to_cmd) { > + case ANX7688_OCM_MSG_PSWAP_REQ: > + dev_info(anx7688->dev, "received response to PSWAP_REQ (%s)\n", > status); > + break; > + > + case ANX7688_OCM_MSG_DSWAP_REQ: > + dev_info(anx7688->dev, "received response to DSWAP_REQ (%s)\n", > status); > + break; > + > + case ANX7688_OCM_MSG_VCONN_SWAP_REQ: > + dev_info(anx7688->dev, "received response to VCONN_SWAP_REQ > (%s)\n", status); > + break; > + > + case ANX7688_OCM_MSG_PWR_OBJ_REQ: > + dev_info(anx7688->dev, "received response to PWR_OBJ_REQ > (%s)\n", status); > + break; > + > + case ANX7688_OCM_MSG_VDM: > + dev_info(anx7688->dev, "received response to VDM (%s)\n", > status); > + break; > + > + case ANX7688_OCM_MSG_GOTO_MIN_REQ: > + dev_info(anx7688->dev, "received response to GOTO_MIN_REQ > (%s)\n", status); > + break; > + > + case ANX7688_OCM_MSG_GET_SNK_CAP: > + dev_info(anx7688->dev, "received response to GET_SNK_CAP > (%s)\n", status); > + break; > + > + default: > + dev_info(anx7688->dev, "received response to unknown request > (%s)\n", status); > + break; > + } > + > + return 0; > +} Noise. Drop this whole function. If you need this kind of information, then please consider trace points, or just use some debugfs trick like what we have in drivers/usb/typec/tcpm/tcpm.c and few other drivers. > +static int anx7688_handle_pd_message(struct anx7688 *anx7688, > + u8 cmd, u8 *msg, unsigned int len) > +{ > + struct device *dev = anx7688->dev; > + union power_supply_propval psy_val = {0,}; > + uint32_t *pdos = (uint32_t *)msg; u32 > + int ret, i, rdo_max_v, rdo_max_p; > + uint32_t pdo, rdo; u32 > + switch (cmd) { > + case ANX7688_OCM_MSG_PWR_SRC_CAP: > + dev_info(anx7688->dev, "received SRC_CAP\n"); Noise. > + > + if (len % 4 != 0) { > + dev_warn(anx7688->dev, "received invalid sized PDO > array\n"); > + break; > + } > + > + /* the partner is PD capable */ > + anx7688->pd_capable = true; > + > + for (i = 0; i < len / 4; i++) { > + pdo = le32_to_cpu(pdos[i]); > + > + if (pdo_type(pdo) == PDO_TYPE_FIXED) { > + unsigned int voltage = pdo_fixed_voltage(pdo); > + unsigned int max_curr = pdo_max_current(pdo); > + > + dev_info(anx7688->dev, "SRC_CAP PDO_FIXED (%umV > %umA)\n", voltage, max_curr); Noise. > + } else if (pdo_type(pdo) == PDO_TYPE_BATT) { > + unsigned int min_volt = pdo_min_voltage(pdo); > + unsigned int max_volt = pdo_max_voltage(pdo); > + unsigned int max_pow = pdo_max_power(pdo); > + > + dev_info(anx7688->dev, "SRC_CAP PDO_BATT > (%umV-%umV %umW)\n", min_volt, max_volt, max_pow); Noise. That line also really should be split in two. I'm stopping my review here. This driver is too noisy. All dev_info calls need to be dropped. If the driver is working correctly then it needs to quiet. Most of those prints are useful for debugging only, so I think similar debugfs log like the one tcpm.c uses could be a good idea for them since you already use debugfs in this driver in any case. thanks, > + } else if (pdo_type(pdo) == PDO_TYPE_VAR) { > + unsigned int min_volt = pdo_min_voltage(pdo); > + unsigned int max_volt = pdo_max_voltage(pdo); > + unsigned int max_curr = pdo_max_current(pdo); > + > + dev_info(anx7688->dev, "SRC_CAP PDO_VAR > (%umV-%umV %umA)\n", min_volt, max_volt, max_curr); > + } else { > + dev_info(anx7688->dev, "SRC_CAP PDO_APDO > (0x%08X)\n", pdo); > + } > + } > + > + /* when auto_pd mode is enabled, the FW has already set > + * RDO_MAX_VOLTAGE and RDO_MAX_POWER for the RDO it sent to the > + * partner based on the received SOURCE_CAPs. This does not > + * mean, the request was acked, but we can't do better here than > + * calculate the current_limit to set later and hope for the > best. > + */ > + rdo_max_v = anx7688_reg_read(anx7688, > ANX7688_REG_MAX_VOLTAGE_STATUS); > + if (rdo_max_v < 0) > + return rdo_max_v; > + if (rdo_max_v == 0) > + return -EINVAL; > + > + rdo_max_p = anx7688_reg_read(anx7688, > ANX7688_REG_MAX_POWER_STATUS); > + if (rdo_max_p < 0) > + return rdo_max_p; > + > + anx7688->pd_current_limit = rdo_max_p * 5000 / rdo_max_v; > + > + dev_dbg(anx7688->dev, "RDO max voltage = %dmV, max power = > %dmW, PD current limit = %dmA\n", > + rdo_max_v * 100, rdo_max_p * 500, > anx7688->pd_current_limit); > + > + // update current limit sooner, now that we have PD negotiation > result > + anx7688->current_update_deadline = ktime_add_ms(ktime_get(), > 500); > + break; > + > + case ANX7688_OCM_MSG_PWR_SNK_CAP: > + dev_info(anx7688->dev, "received SNK_CAP\n"); > + > + if (len % 4 != 0) { > + dev_warn(anx7688->dev, "received invalid sized PDO > array\n"); > + break; > + } > + > + for (i = 0; i < len / 4; i++) { > + pdo = le32_to_cpu(pdos[i]); > + > + if (pdo_type(pdo) == PDO_TYPE_FIXED) { > + unsigned int voltage = pdo_fixed_voltage(pdo); > + unsigned int max_curr = pdo_max_current(pdo); > + > + dev_info(anx7688->dev, "SNK_CAP PDO_FIXED (%umV > %umA)\n", voltage, max_curr); > + } else if (pdo_type(pdo) == PDO_TYPE_BATT) { > + unsigned int min_volt = pdo_min_voltage(pdo); > + unsigned int max_volt = pdo_max_voltage(pdo); > + unsigned int max_pow = pdo_max_power(pdo); > + > + dev_info(anx7688->dev, "SNK_CAP PDO_BATT > (%umV-%umV %umW)\n", min_volt, max_volt, max_pow); > + } else if (pdo_type(pdo) == PDO_TYPE_VAR) { > + unsigned int min_volt = pdo_min_voltage(pdo); > + unsigned int max_volt = pdo_max_voltage(pdo); > + unsigned int max_curr = pdo_max_current(pdo); > + > + dev_info(anx7688->dev, "SNK_CAP PDO_VAR > (%umV-%umV %umA)\n", min_volt, max_volt, max_curr); > + } else { > + dev_info(anx7688->dev, "SNK_CAP PDO_APDO > (0x%08X)\n", pdo); > + } > + } > + > + break; > + > + case ANX7688_OCM_MSG_PWR_OBJ_REQ: > + dev_info(anx7688->dev, "received PWR_OBJ_REQ\n"); > + > + anx7688->pd_capable = true; > + > + if (len != 4) { > + dev_warn(anx7688->dev, "received invalid sized RDO\n"); > + break; > + } > + > + rdo = le32_to_cpu(pdos[0]); > + > + if (rdo_index(rdo) >= 1 && rdo_index(rdo) <= > anx7688->n_src_caps) { > + unsigned int rdo_op_curr = rdo_op_current(rdo); > + unsigned int rdo_max_curr = rdo_max_current(rdo); > + unsigned int rdo_idx = rdo_index(rdo) - 1; > + unsigned int pdo_volt, pdo_max_curr; > + > + pdo = anx7688->src_caps[rdo_idx]; > + pdo_volt = pdo_fixed_voltage(pdo); > + pdo_max_curr = pdo_max_current(pdo); > + > + dev_info(anx7688->dev, "RDO (idx=%d op=%umA > max=%umA)\n", > + rdo_idx, rdo_op_curr, rdo_max_curr); > + > + dev_info(anx7688->dev, "PDO_FIXED (%umV %umA)\n", > + pdo_volt, pdo_max_curr); > + > + // We could check the req and respond with accept/reject > + // but we're using auto_pd feature, so the FW will do > + // this for us > + } else { > + dev_info(anx7688->dev, "PWR_OBJ RDO index out of range > (RDO = 0x%08X)\n", rdo); > + } > + > + break; > + > + case ANX7688_OCM_MSG_ACCEPT: > + dev_info(anx7688->dev, "received ACCEPT\n"); > + break; > + > + case ANX7688_OCM_MSG_REJECT: > + dev_info(anx7688->dev, "received REJECT\n"); > + break; > + > + case ANX7688_OCM_MSG_RESPONSE_TO_REQ: > + if (len < 2) { > + dev_warn(anx7688->dev, "received short > RESPONSE_TO_REQ\n"); > + break; > + } > + > + anx7688_handle_pd_message_response(anx7688, msg[0], msg[1]); > + break; > + > + case ANX7688_OCM_MSG_SOFT_RST: > + dev_info(anx7688->dev, "received SOFT_RST\n"); > + break; > + > + case ANX7688_OCM_MSG_HARD_RST: > + if (anx7688->pd_capable) { > + dev_info(anx7688->dev, "received HARD_RST\n"); > + > + // stop drawing power from VBUS > + psy_val.intval = 0; > + dev_dbg(dev, "disabling vbus_in power path\n"); > + ret = power_supply_set_property(anx7688->vbus_in_supply, > + > POWER_SUPPLY_PROP_ONLINE, > + &psy_val); > + if (ret) > + dev_err(anx7688->dev, "failed to offline > vbus_in\n"); > + > + // wait till the dust settles > + anx7688->current_update_deadline = > ktime_add_ms(ktime_get(), 3000); > + } else { > + dev_dbg(anx7688->dev, "received HARD_RST, idiot > firmware is bored\n"); > + } > + > + break; > + > + case ANX7688_OCM_MSG_RESTART: > + dev_info(anx7688->dev, "received RESTART\n"); > + break; > + > + case ANX7688_OCM_MSG_PSWAP_REQ: > + dev_info(anx7688->dev, "received PSWAP_REQ\n"); > + break; > + > + case ANX7688_OCM_MSG_DSWAP_REQ: > + dev_info(anx7688->dev, "received DSWAP_REQ\n"); > + break; > + > + case ANX7688_OCM_MSG_VCONN_SWAP_REQ: > + dev_info(anx7688->dev, "received VCONN_SWAP_REQ\n"); > + break; > + > + case ANX7688_OCM_MSG_DP_ALT_ENTER: > + dev_info(anx7688->dev, "received DP_ALT_ENTER\n"); > + break; > + > + case ANX7688_OCM_MSG_DP_ALT_EXIT: > + dev_info(anx7688->dev, "received DP_ALT_EXIT\n"); > + break; > + > + case ANX7688_OCM_MSG_DP_SNK_IDENTITY: > + dev_info(anx7688->dev, "received DP_SNK_IDENTITY\n"); > + break; > + > + case ANX7688_OCM_MSG_SVID: > + dev_info(anx7688->dev, "received SVID\n"); > + break; > + > + case ANX7688_OCM_MSG_VDM: > + dev_info(anx7688->dev, "received VDM\n"); > + break; > + > + case ANX7688_OCM_MSG_GOTO_MIN_REQ: > + dev_info(anx7688->dev, "received GOTO_MIN_REQ\n"); > + break; > + > + case ANX7688_OCM_MSG_PD_STATUS_REQ: > + dev_info(anx7688->dev, "received PD_STATUS_REQ\n"); > + break; > + > + case ANX7688_OCM_MSG_GET_DP_SNK_CAP: > + dev_info(anx7688->dev, "received GET_DP_SNK_CAP\n"); > + break; > + > + case ANX7688_OCM_MSG_DP_SNK_CFG: > + dev_info(anx7688->dev, "received DP_SNK_CFG\n"); > + break; > + > + default: > + dev_info(anx7688->dev, "received unknown message 0x%02x\n", > cmd); > + break; > + } > + > + return 0; > +} > + > +static int anx7688_receive_msg(struct anx7688 *anx7688) > +{ > + u8 pkt[32], checksum = 0; > + int i, ret; > + > + ret = i2c_smbus_read_i2c_block_data(anx7688->client_tcpc, > + ANX7688_TCPC_REG_INTERFACE_RECV, > + 32, pkt); > + if (ret < 0) { > + dev_err(anx7688->dev, "failed to read pd msg\n"); > + return ret; > + } > + > + ret = anx7688_tcpc_reg_write(anx7688, ANX7688_TCPC_REG_INTERFACE_RECV, > 0); > + if (ret) > + dev_warn(anx7688->dev, "failed to clear recv FIFO\n"); > + > + if (pkt[0] == 0 || pkt[0] > sizeof(pkt) - 2) { > + dev_err(anx7688->dev, "received invalid pd message: %*ph\n", > + (int)sizeof(pkt), pkt); > + return -EINVAL; > + } > + > + dev_dbg(anx7688->dev, "recv ocm message cmd=0x%02x %*ph\n", > + pkt[1], pkt[0] + 2, pkt); > + > + for (i = 0; i < pkt[0] + 2; i++) > + checksum += pkt[i]; > + > + if (checksum != 0) { > + dev_err(anx7688->dev, "bad checksum on received message\n"); > + return -EINVAL; > + } > + > + anx7688_handle_pd_message(anx7688, pkt[1], pkt + 2, pkt[0] - 1); > + return 0; > +} > + > +static const char *anx7688_cc_status_string(unsigned int v) > +{ > + switch (v) { > + case 0: return "SRC.Open"; > + case 1: return "SRC.Rd"; > + case 2: return "SRC.Ra"; > + case 4: return "SNK.Default"; > + case 8: return "SNK.Power1.5"; > + case 12: return "SNK.Power3.0"; > + default: return "UNK"; > + } > +} > + > +static int anx7688_update_status(struct anx7688 *anx7688) > +{ > + struct device *dev = anx7688->dev; > + bool vbus_on, vconn_on, dr_dfp; > + int status, cc_status, dp_state, dp_substate, ret; > + > + status = anx7688_reg_read(anx7688, ANX7688_REG_STATUS); > + if (status < 0) > + return status; > + > + cc_status = anx7688_reg_read(anx7688, ANX7688_REG_CC_STATUS); > + if (cc_status < 0) > + return cc_status; > + > + dp_state = anx7688_tcpc_reg_read(anx7688, 0x87); > + if (dp_state < 0) > + return dp_state; > + > + dp_substate = anx7688_tcpc_reg_read(anx7688, 0x88); > + if (dp_substate < 0) > + return dp_substate; > + > + anx7688_set_hdmi_hpd(anx7688, dp_state >= 3); > + > + dp_state = (dp_state << 8) | dp_substate; > + > + if (anx7688->last_status == -1 || anx7688->last_status != status) { > + anx7688->last_status = status; > + dev_dbg(dev, "status changed to 0x%02x\n", status); > + } > + > + if (anx7688->last_cc_status == -1 || anx7688->last_cc_status != > cc_status) { > + anx7688->last_cc_status = cc_status; > + dev_dbg(dev, "cc_status changed to CC1 = %s CC2 = %s\n", > + anx7688_cc_status_string(cc_status & 0xf), > + anx7688_cc_status_string((cc_status >> 4) & 0xf)); > + } > + > + if (anx7688->last_dp_state == -1 || anx7688->last_dp_state != dp_state) > { > + anx7688->last_dp_state = dp_state; > + dev_dbg(dev, "DP state changed to 0x%04x\n", dp_state); > + } > + > + vbus_on = !!(status & ANX7688_VBUS_STATUS); > + vconn_on = !!(status & ANX7688_VCONN_STATUS); > + dr_dfp = !!(status & ANX7688_DATA_ROLE_STATUS); > + > + if (anx7688->vbus_on != vbus_on) { > + dev_dbg(anx7688->dev, "POWER role change to %s\n", > + vbus_on ? "SOURCE" : "SINK"); > + > + if (vbus_on) { > + ret = > regulator_enable(anx7688->supplies[ANX7688_VBUS_INDEX].consumer); > + if (ret) { > + dev_err(anx7688->dev, "failed to enable > vbus\n"); > + return ret; > + } > + } else { > + ret = > regulator_disable(anx7688->supplies[ANX7688_VBUS_INDEX].consumer); > + if (ret) { > + dev_err(anx7688->dev, "failed to disable > vbus\n"); > + return ret; > + } > + } > + > + anx7688->pwr_role = vbus_on ? TYPEC_SOURCE : TYPEC_SINK; > + typec_set_pwr_role(anx7688->port, anx7688->pwr_role); > + anx7688->vbus_on = vbus_on; > + } > + > + if (anx7688->vconn_on != vconn_on) { > + dev_dbg(anx7688->dev, "VCONN role change to %s\n", > + vconn_on ? "SOURCE" : "SINK"); > + > + if (vconn_on) { > + ret = > regulator_enable(anx7688->supplies[ANX7688_VCONN_INDEX].consumer); > + if (ret) { > + dev_err(anx7688->dev, "failed to enable > vconn\n"); > + return ret; > + } > + } else { > + ret = > regulator_disable(anx7688->supplies[ANX7688_VCONN_INDEX].consumer); > + if (ret) { > + dev_err(anx7688->dev, "failed to disable > vconn\n"); > + return ret; > + } > + } > + > + typec_set_vconn_role(anx7688->port, vconn_on ? TYPEC_SOURCE : > TYPEC_SINK); > + anx7688->vconn_on = vconn_on; > + } > + > + anx7688->data_role = dr_dfp ? TYPEC_HOST : TYPEC_DEVICE; > + typec_set_data_role(anx7688->port, anx7688->data_role); > + > + if (usb_role_switch_get_role(anx7688->role_sw) != > + (dr_dfp ? USB_ROLE_HOST : USB_ROLE_DEVICE)) { > + dev_dbg(anx7688->dev, "DATA role change requested to %s\n", > + dr_dfp ? "DFP" : "UFP"); > + > + ret = usb_role_switch_set_role(anx7688->role_sw, > + dr_dfp ? USB_ROLE_HOST : > USB_ROLE_DEVICE); > + if (ret) > + return ret; > + } > + > + return 0; > +} > + > +static irqreturn_t anx7688_irq_status_handler(int irq, void *data) > +{ > + struct anx7688 *anx7688 = data; > + struct device *dev = anx7688->dev; > + int tcpc_status, ext2_status, soft_status; > + > + mutex_lock(&anx7688->lock); > + > + if (!test_bit(ANX7688_F_CONNECTED, anx7688->flags)) { > + dev_dbg(dev, "spurious status irq\n"); > + /* > + * anx chip should be disabled and power off, nothing > + * more to do > + */ > + goto out_unlock; > + } > + > + // clear tcpc interrupt > + tcpc_status = anx7688_tcpc_reg_read(anx7688, ANX7688_TCPC_REG_ALERT0); > + if (tcpc_status > 0) > + anx7688_tcpc_reg_write(anx7688, ANX7688_TCPC_REG_ALERT0, > tcpc_status); > + > + ext2_status = anx7688_reg_read(anx7688, ANX7688_REG_IRQ_EXT_SOURCE2); > + if (ext2_status & ANX7688_IRQ2_SOFT_INT) { > + soft_status = anx7688_reg_read(anx7688, ANX7688_REG_STATUS_INT); > + anx7688_reg_write(anx7688, ANX7688_REG_STATUS_INT, 0); > + > + if (soft_status > 0) { > + soft_status &= ANX7688_SOFT_INT_MASK; > + > + if (soft_status & ANX7688_IRQS_RECEIVED_MSG) > + anx7688_receive_msg(anx7688); > + > + if (soft_status & (ANX7688_IRQS_CC_STATUS_CHANGE | > + ANX7688_IRQS_VBUS_CHANGE | > + ANX7688_IRQS_VCONN_CHANGE | > + ANX7688_IRQS_DATA_ROLE_CHANGE)) { > + anx7688_update_status(anx7688); > + } > + } > + > + anx7688_reg_write(anx7688, ANX7688_REG_IRQ_EXT_SOURCE2, > ANX7688_IRQ2_SOFT_INT); > + } > + > +out_unlock: > + mutex_unlock(&anx7688->lock); > + > + return IRQ_HANDLED; > +} > + > +static int anx7688_dr_set(struct typec_port *port, enum typec_data_role role) > +{ > + struct anx7688 *anx7688 = typec_get_drvdata(port); > + int ret = 0; > + > + dev_info(anx7688->dev, "data role set %d\n", role); > + > + if (anx7688->data_role != role) { > + mutex_lock(&anx7688->lock); > + ret = anx7688_send_ocm_message(anx7688, > ANX7688_OCM_MSG_DSWAP_REQ, 0, 0); > + mutex_unlock(&anx7688->lock); > + } > + > + return ret; > +} > + > +static int anx7688_pr_set(struct typec_port *port, enum typec_role role) > +{ > + struct anx7688 *anx7688 = typec_get_drvdata(port); > + int ret = 0; > + > + dev_info(anx7688->dev, "power role set %d\n", role); > + > + if (anx7688->pwr_role != role) { > + mutex_lock(&anx7688->lock); > + ret = anx7688_send_ocm_message(anx7688, > ANX7688_OCM_MSG_PSWAP_REQ, 0, 0); > + mutex_unlock(&anx7688->lock); > + } > + > + return ret; > +} > + > +/* > + * Calls to the EEPROM functions need to be taken under the anx7688 lock. > + */ > +static int anx7688_eeprom_set_address(struct anx7688 *anx7688, u16 addr) > +{ > + int ret; > + > + ret = anx7688_reg_write(anx7688, 0xe0, (addr >> 8) & 0xff); > + if (ret < 0) > + return ret; > + > + return anx7688_reg_write(anx7688, 0xe1, addr & 0xff); > +} > + > +static int anx7688_eeprom_wait_done(struct anx7688 *anx7688) > +{ > + ktime_t timeout; > + int ret; > + > + // wait for read to be done > + timeout = ktime_add_us(ktime_get(), 50000); > + while (true) { > + ret = anx7688_reg_read(anx7688, 0xe2); > + if (ret < 0) > + return ret; > + > + if (ret & BIT(3)) > + return 0; > + > + if (ktime_after(ktime_get(), timeout)) { > + dev_err(anx7688->dev, "timeout waiting for eeprom\n"); > + return -ETIMEDOUT; > + } > + } > +} > + > +/* wait for internal FSM of EEPROM to be in a state ready for > + * programming/reading > + */ > +static int anx7688_eeprom_wait_ready(struct anx7688 *anx7688) > +{ > + ktime_t timeout; > + int ret; > + > + // wait until eeprom is ready > + timeout = ktime_add_us(ktime_get(), 1000000); > + while (true) { > + ret = anx7688_reg_read(anx7688, 0x7f); > + if (ret < 0) > + return ret; > + > + if ((ret & 0x0f) == 7) > + return 0; > + > + if (ktime_after(ktime_get(), timeout)) { > + dev_err(anx7688->dev, "timeout waiting for eeprom to > initialize\n"); > + return -ETIMEDOUT; > + } > + > + msleep(5); > + } > +} > + > +static int anx7688_eeprom_read(struct anx7688 *anx7688, unsigned int addr, > u8 buf[16]) > +{ > + int ret; > + > + ret = anx7688_eeprom_set_address(anx7688, addr); > + if (ret) > + return ret; > + > + // initiate read > + ret = anx7688_reg_write(anx7688, 0xe2, 0x06); > + if (ret < 0) > + return ret; > + > + ret = anx7688_eeprom_wait_done(anx7688); > + if (ret) > + return ret; > + > + ret = i2c_smbus_read_i2c_block_data(anx7688->client, 0xd0, 16, buf); > + if (ret < 0) { > + dev_err(anx7688->dev, > + "failed to read eeprom data (err=%d)\n", ret); > + return ret; > + } > + > + return 0; > +} > + > +static const struct typec_operations anx7688_typec_ops = { > + .dr_set = anx7688_dr_set, > + .pr_set = anx7688_pr_set, > +}; > + > +/* > + * This function has to work when the ANX7688 is active, and when > + * it is powered down. It power cycles the chip and asserts the OCM > + * reset, to prevent OCM FW interfering with EEPROM reading. > + * > + * After reading EEPROM, the reconnection is scheduled. > + */ > +static int anx7688_firmware_show(struct seq_file *s, void *data) > +{ > + struct anx7688 *anx7688 = s->private; > + unsigned int addr; > + u8 buf[16]; > + int ret; > + > + mutex_lock(&anx7688->lock); > + > + if (test_bit(ANX7688_F_CONNECTED, anx7688->flags)) > + anx7688_disconnect(anx7688); > + > + msleep(20); > + > + anx7688_power_enable(anx7688); > + > + ret = anx7688_reg_update_bits(anx7688, ANX7688_REG_USBC_RESET_CTRL, > + ANX7688_USBC_RESET_CTRL_OCM_RESET, > + ANX7688_USBC_RESET_CTRL_OCM_RESET); > + if (ret < 0) > + goto out_powerdown; > + > + ret = anx7688_eeprom_wait_ready(anx7688); > + if (ret) > + goto out_powerdown; > + > + msleep(10); > + > + for (addr = 0x10; addr < 0x10000; addr += 16) { > + // set address > + ret = anx7688_eeprom_read(anx7688, addr, buf); > + if (ret < 0) > + goto out_powerdown; > + > + seq_write(s, buf, sizeof(buf)); > + } > + > +out_powerdown: > + anx7688_power_disable(anx7688); > + schedule_delayed_work(&anx7688->work, 0); > + mutex_unlock(&anx7688->lock); > + > + return ret; > +} > +DEFINE_SHOW_ATTRIBUTE(anx7688_firmware); > + > +static int anx7688_regs_show(struct seq_file *s, void *data) > +{ > + struct anx7688 *anx7688 = s->private; > + u8 buf[16]; > + unsigned int i, addr; > + int ret = -ENODEV; > + > + mutex_lock(&anx7688->lock); > + > + if (!test_bit(ANX7688_F_POWERED, anx7688->flags)) > + goto out_unlock; > + > + for (addr = 0; addr < 256; addr += 16) { > + ret = i2c_smbus_read_i2c_block_data(anx7688->client, addr, > + sizeof(buf), buf); > + if (ret < 0) { > + dev_err(anx7688->dev, > + "failed to read registers (err=%d)\n", ret); > + goto out_unlock; > + } > + > + for (i = 0; i < 16; i++) > + seq_printf(s, "50%02x: %02x\n", addr + i, buf[i]); > + } > + > + for (addr = 0; addr < 256; addr += 16) { > + ret = i2c_smbus_read_i2c_block_data(anx7688->client_tcpc, addr, > + sizeof(buf), buf); > + if (ret < 0) { > + dev_err(anx7688->dev, > + "failed to read registers (err=%d)\n", ret); > + goto out_unlock; > + } > + > + for (i = 0; i < 16; i++) > + seq_printf(s, "58%02x: %02x\n", addr + i, buf[i]); > + } > + > +out_unlock: > + mutex_unlock(&anx7688->lock); > + > + return ret; > +} > +DEFINE_SHOW_ATTRIBUTE(anx7688_regs); > + > +static int anx7688_status_show(struct seq_file *s, void *data) > +{ > + struct anx7688 *anx7688 = s->private; > + > + mutex_lock(&anx7688->lock); > + > + seq_puts(s, "not much\n"); > + > + mutex_unlock(&anx7688->lock); > + > + return 0; > +} > +DEFINE_SHOW_ATTRIBUTE(anx7688_status); > + > +/* > + * This is just a 1s watchdog checking the state if cabledet pin. > + */ > +static void anx7688_cabledet_timer_fn(struct timer_list *t) > +{ > + struct anx7688 *anx7688 = from_timer(anx7688, t, work_timer); > + > + schedule_delayed_work(&anx7688->work, 0); > + mod_timer(t, jiffies + msecs_to_jiffies(1000)); > +} > + > +static void anx7688_handle_vbus_in_notify(struct anx7688 *anx7688) > +{ > + union power_supply_propval psy_val = {0,}; > + struct device *dev = anx7688->dev; > + int ret; > + > + ret = power_supply_get_property(anx7688->vbus_in_supply, > + POWER_SUPPLY_PROP_USB_TYPE, > + &psy_val); > + if (ret) { > + dev_err(dev, "failed to get USB BC1.2 result\n"); > + return; > + } > + > + if (anx7688->last_bc_result == psy_val.intval) > + return; > + > + anx7688->last_bc_result = psy_val.intval; > + > + switch (psy_val.intval) { > + case POWER_SUPPLY_USB_TYPE_DCP: > + case POWER_SUPPLY_USB_TYPE_CDP: > + dev_dbg(dev, "BC 1.2 result: DCP or CDP\n"); > + break; > + case POWER_SUPPLY_USB_TYPE_SDP: > + default: > + dev_dbg(dev, "BC 1.2 result: SDP\n"); > + break; > + } > +} > + > +static int anx7688_cc_status(unsigned int v) > +{ > + switch (v) { > + case 0: return -1; > + case 1: return -1; > + case 2: return -1; > + case 4: return TYPEC_PWR_MODE_USB; > + case 8: return TYPEC_PWR_MODE_1_5A; > + case 12: return TYPEC_PWR_MODE_3_0A; > + default: return -1; > + } > +} > + > +static const char *anx7688_get_power_mode_name(enum typec_pwr_opmode mode) > +{ > + switch (mode) { > + case TYPEC_PWR_MODE_USB: return "USB"; > + case TYPEC_PWR_MODE_1_5A: return "1.5A"; > + case TYPEC_PWR_MODE_3_0A: return "3.0A"; > + case TYPEC_PWR_MODE_PD: return "PD"; > + default: return "Unknown"; > + } > +} > + > +/* > + * This is called after 500ms after connection when the PD contract should > have > + * been negotiated. We should inspect CC pins or PD status here and decide > what > + * input current limit to set. > + */ > +static void anx7688_handle_current_update(struct anx7688 *anx7688) > +{ > + unsigned int cc_status = anx7688->last_cc_status; > + union power_supply_propval val = {0,}; > + struct device *dev = anx7688->dev; > + int pwr_mode, ret, current_limit = 0; > + > + if (anx7688->pd_capable) { > + pwr_mode = TYPEC_PWR_MODE_PD; > + } else if (cc_status < 0) { > + pwr_mode = TYPEC_PWR_MODE_USB; > + } else { > + pwr_mode = anx7688_cc_status(cc_status & 0xf); > + if (pwr_mode < 0) > + pwr_mode = anx7688_cc_status((cc_status >> 4) & 0xf); > + if (pwr_mode < 0) > + pwr_mode = TYPEC_PWR_MODE_USB; > + } > + > + if (pwr_mode == TYPEC_PWR_MODE_1_5A) > + current_limit = 1500; > + else if (pwr_mode == TYPEC_PWR_MODE_3_0A) > + current_limit = 3000; > + else if (pwr_mode == TYPEC_PWR_MODE_PD) > + current_limit = anx7688->pd_current_limit; > + > + anx7688->input_current_limit = current_limit; > + > + dev_info(anx7688->dev, "updating power mode to %s, current limit %dmA > (0 => BC1.2)\n", > + anx7688_get_power_mode_name(pwr_mode), current_limit); > + > + if (current_limit) { > + /* > + * Disable BC1.2 detection, because we'll be setting > + * a current limit determined by USB-PD > + */ > + dev_dbg(dev, "disabling USB BC 1.2 detection\n"); > + > + val.intval = current_limit * 1000; > + dev_dbg(dev, "setting vbus_in current limit to %d mA\n", > current_limit); > + ret = power_supply_set_property(anx7688->vbus_in_supply, > + > POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT, > + &val); > + if (ret) > + dev_err(dev, "failed to set vbus_in current to %d mA\n", > + current_limit); > + } > + /* > + * else use the result of BC1.2 detection performed by PMIC. > + */ > + > + /* Turn on VBUS power path inside PMIC. */ > + val.intval = 1; > + dev_dbg(dev, "enabling vbus_in power path\n"); > + ret = power_supply_set_property(anx7688->vbus_in_supply, > + POWER_SUPPLY_PROP_ONLINE, > + &val); > + if (ret) > + dev_err(anx7688->dev, "failed to enable vbus_in\n"); > + > + typec_set_pwr_opmode(anx7688->port, pwr_mode); > +} > + > +static int anx7688_vbus_in_notify(struct notifier_block *nb, > + unsigned long val, void *v) > +{ > + struct anx7688 *anx7688 = container_of(nb, struct anx7688, vbus_in_nb); > + struct power_supply *psy = v; > + > + /* atomic context */ > + if (val == PSY_EVENT_PROP_CHANGED && psy == anx7688->vbus_in_supply) { > + set_bit(ANX7688_F_PWRSUPPLY_CHANGE, anx7688->flags); > + schedule_delayed_work(&anx7688->work, 0); > + } > + > + return NOTIFY_OK; > +} > + > +static void anx7688_work(struct work_struct *work) > +{ > + struct anx7688 *anx7688 = container_of(work, struct anx7688, work.work); > + > + if (test_bit(ANX7688_F_FW_FAILED, anx7688->flags)) > + return; > + > + mutex_lock(&anx7688->lock); > + > + if (test_and_clear_bit(ANX7688_F_PWRSUPPLY_CHANGE, anx7688->flags)) > + anx7688_handle_vbus_in_notify(anx7688); > + > + anx7688_handle_cable_change(anx7688); > + > + if (test_bit(ANX7688_F_CONNECTED, anx7688->flags)) { > + /* > + * We check status periodically outside of interrupt, just to > + * be sure we didn't miss any status interrupts > + */ > + anx7688_update_status(anx7688); > + > + if (anx7688->current_update_deadline && > + ktime_after(ktime_get(), > anx7688->current_update_deadline)) { > + anx7688->current_update_deadline = 0; > + anx7688_handle_current_update(anx7688); > + } > + } > + > + mutex_unlock(&anx7688->lock); > +} > + > +static int anx7688_parse_connector(struct device *dev, struct anx7688 > *anx7688, struct typec_capability *cap) > +{ > + struct fwnode_handle *fwnode; > + const char *buf; > + int ret; > + > + fwnode = device_get_named_child_node(dev, "connector"); > + if (!fwnode) > + return -EINVAL; > + > + ret = fwnode_property_read_string(fwnode, "power-role", &buf); > + if (ret) { > + dev_err(dev, "power-role not found: %d\n", ret); > + return ret; > + } > + > + ret = typec_find_port_power_role(buf); > + if (ret < 0) > + return ret; > + cap->type = ret; > + > + ret = fwnode_property_read_string(fwnode, "data-role", &buf); > + if (ret) { > + dev_err(dev, "data-role not found: %d\n", ret); > + return ret; > + } > + > + ret = typec_find_port_data_role(buf); > + if (ret < 0) > + return ret; > + cap->data = ret; > + > + ret = fwnode_property_read_string(fwnode, "try-power-role", &buf); > + if (ret) { > + dev_err(dev, "try-power-role not found: %d\n", ret); > + return ret; > + } > + > + ret = typec_find_power_role(buf); > + if (ret < 0) > + return ret; > + cap->prefer_role = ret; > + > + /* Get source pdos */ > + ret = fwnode_property_count_u32(fwnode, "source-pdos"); > + if (ret <= 0) > + return -EINVAL; > + > + anx7688->n_src_caps = min_t(u8, ret, ARRAY_SIZE(anx7688->src_caps)); > + ret = fwnode_property_read_u32_array(fwnode, "source-pdos", > + anx7688->src_caps, > + anx7688->n_src_caps); > + if (ret < 0) { > + dev_err(dev, "source cap validate failed: %d\n", ret); > + return -EINVAL; > + } > + > + ret = fwnode_property_count_u32(fwnode, "sink-pdos"); > + if (ret <= 0) > + return -EINVAL; > + > + anx7688->n_snk_caps = min_t(u8, ret, ARRAY_SIZE(anx7688->snk_caps)); > + ret = fwnode_property_read_u32_array(fwnode, "sink-pdos", > + anx7688->snk_caps, > + anx7688->n_snk_caps); > + if (ret < 0) { > + dev_err(dev, "sink cap validate failed: %d\n", ret); > + return -EINVAL; > + } > + > + return 0; > +} > + > +static int anx7688_i2c_probe(struct i2c_client *client) > +{ > + struct anx7688 *anx7688; > + struct device *dev = &client->dev; > + struct typec_capability typec_cap = { }; > + int i, vid_h, vid_l; > + int irq_cabledet; > + int ret = 0; > + > + anx7688 = devm_kzalloc(dev, sizeof(*anx7688), GFP_KERNEL); > + if (!anx7688) > + return -ENOMEM; > + > + i2c_set_clientdata(client, anx7688); > + anx7688->client = client; > + anx7688->dev = &client->dev; > + mutex_init(&anx7688->lock); > + INIT_DELAYED_WORK(&anx7688->work, anx7688_work); > + anx7688->last_extcon_state = -1; > + > + ret = anx7688_parse_connector(dev, anx7688, &typec_cap); > + if (ret < 0) { > + dev_err(dev, "failed to parse connector from DT\n"); > + return ret; > + } > + > + for (i = 0; i < ANX7688_NUM_SUPPLIES; i++) > + anx7688->supplies[i].supply = anx7688_supply_names[i]; > + ret = devm_regulator_bulk_get(dev, ANX7688_NUM_SUPPLIES, > + anx7688->supplies); > + if (ret) > + return ret; > + > + anx7688->vbus_in_supply = > + devm_power_supply_get_by_phandle(dev, "vbus-in-supply"); > + if (IS_ERR(anx7688->vbus_in_supply)) { > + dev_err(dev, "Couldn't get the VBUS power supply\n"); > + return PTR_ERR(anx7688->vbus_in_supply); > + } > + > + if (!anx7688->vbus_in_supply) > + return -EPROBE_DEFER; > + > + anx7688->gpio_enable = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW); > + if (IS_ERR(anx7688->gpio_enable)) { > + dev_err(dev, "Could not get enable gpio\n"); > + return PTR_ERR(anx7688->gpio_enable); > + } > + > + anx7688->gpio_reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); > + if (IS_ERR(anx7688->gpio_reset)) { > + dev_err(dev, "Could not get reset gpio\n"); > + return PTR_ERR(anx7688->gpio_reset); > + } > + > + anx7688->gpio_cabledet = devm_gpiod_get(dev, "cabledet", GPIOD_IN); > + if (IS_ERR(anx7688->gpio_cabledet)) { > + dev_err(dev, "Could not get cabledet gpio\n"); > + return PTR_ERR(anx7688->gpio_cabledet); > + } > + > + irq_cabledet = gpiod_to_irq(anx7688->gpio_cabledet); > + if (irq_cabledet < 0) { > + dev_err(dev, "Could not get cabledet irq\n"); > + return irq_cabledet; > + } > + > + // Initialize extcon device > + anx7688->extcon = devm_extcon_dev_allocate(dev, anx7688_extcon_cable); > + if (IS_ERR(anx7688->extcon)) > + return -ENOMEM; > + > + ret = devm_extcon_dev_register(dev, anx7688->extcon); > + if (ret) { > + dev_err(dev, "failed to register extcon device\n"); > + return ret; > + } > + > + // Register the TCPC i2c interface as second interface (0x58) > + anx7688->client_tcpc = i2c_new_dummy_device(client->adapter, 0x2c); > + if (IS_ERR(anx7688->client_tcpc)) { > + dev_err(dev, "Could not register tcpc i2c client\n"); > + return PTR_ERR(anx7688->client_tcpc); > + } > + i2c_set_clientdata(anx7688->client_tcpc, anx7688); > + > + // powerup and probe the ANX chip > + > + ret = regulator_bulk_enable(ANX7688_NUM_ALWAYS_ON_SUPPLIES, > + anx7688->supplies); > + if (ret) { > + dev_err(dev, "Could not enable regulators\n"); > + goto err_dummy_dev; > + } > + > + msleep(10); > + > + anx7688_power_enable(anx7688); > + > + vid_l = anx7688_tcpc_reg_read(anx7688, ANX7688_TCPC_REG_VENDOR_ID0); > + vid_h = anx7688_tcpc_reg_read(anx7688, ANX7688_TCPC_REG_VENDOR_ID1); > + if (vid_l < 0 || vid_h < 0) { > + ret = vid_l < 0 ? vid_l : vid_h; > + anx7688_power_disable(anx7688); > + goto err_disable_reg; > + } > + > + dev_info(dev, "Vendor id 0x%04x\n", vid_l | vid_h << 8); > + > + anx7688_power_disable(anx7688); > + > + anx7688->role_sw = usb_role_switch_get(dev); > + if (IS_ERR(anx7688->role_sw)) { > + dev_err(dev, "Could not get role switch\n"); > + ret = PTR_ERR(anx7688->role_sw); > + goto err_disable_reg; > + } > + > + // setup a typec port device > + typec_cap.revision = USB_TYPEC_REV_1_2; > + typec_cap.pd_revision = 0x200; > + ret = -EINVAL; > + if (typec_cap.type != TYPEC_PORT_DRP) > + goto err_disable_reg; > + if (typec_cap.data != TYPEC_PORT_DRD) > + goto err_disable_reg; > + typec_cap.driver_data = anx7688; > + typec_cap.ops = &anx7688_typec_ops; > + > + anx7688->port = typec_register_port(dev, &typec_cap); > + if (IS_ERR(anx7688->port)) { > + dev_err(dev, "Could not register type-c port\n"); > + ret = PTR_ERR(anx7688->port); > + goto err_role_sw; > + } > + > + anx7688->pwr_role = TYPEC_SINK; > + anx7688->data_role = TYPEC_DEVICE; > + typec_set_pwr_role(anx7688->port, anx7688->pwr_role); > + typec_set_data_role(anx7688->port, anx7688->data_role); > + typec_set_pwr_opmode(anx7688->port, TYPEC_PWR_MODE_USB); > + typec_set_vconn_role(anx7688->port, TYPEC_SINK); > + > + // make sure BC1.2 detection in PMIC is enabled > + anx7688->last_bc_result = -1; > + > + dev_dbg(dev, "enabling USB BC 1.2 detection\n"); > + > + ret = devm_request_irq(dev, irq_cabledet, anx7688_irq_plug_handler, > + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, > + "anx7688-cabledet", anx7688); > + if (ret < 0) { > + dev_err(dev, "Could not request cabledet irq (%d)\n", ret); > + goto err_cport; > + } > + > + ret = devm_request_threaded_irq(dev, client->irq, > + NULL, anx7688_irq_status_handler, > + IRQF_ONESHOT, NULL, anx7688); > + if (ret < 0) { > + dev_err(dev, "Could not request irq (%d)\n", ret); > + goto err_cport; > + } > + > + anx7688->vbus_in_nb.notifier_call = anx7688_vbus_in_notify; > + anx7688->vbus_in_nb.priority = 0; > + ret = power_supply_reg_notifier(&anx7688->vbus_in_nb); > + if (ret) > + goto err_cport; > + > + anx7688->debug_root = debugfs_create_dir("anx7688", NULL); > + debugfs_create_file("firmware", 0444, anx7688->debug_root, anx7688, > + &anx7688_firmware_fops); > + debugfs_create_file("regs", 0444, anx7688->debug_root, anx7688, > + &anx7688_regs_fops); > + debugfs_create_file("status", 0444, anx7688->debug_root, anx7688, > + &anx7688_status_fops); > + > + schedule_delayed_work(&anx7688->work, msecs_to_jiffies(10)); > + > + timer_setup(&anx7688->work_timer, anx7688_cabledet_timer_fn, 0); > + mod_timer(&anx7688->work_timer, jiffies + msecs_to_jiffies(1000)); > + return 0; > + > +err_cport: > + typec_unregister_port(anx7688->port); > +err_role_sw: > + usb_role_switch_put(anx7688->role_sw); > +err_disable_reg: > + regulator_bulk_disable(ANX7688_NUM_ALWAYS_ON_SUPPLIES, > anx7688->supplies); > +err_dummy_dev: > + i2c_unregister_device(anx7688->client_tcpc); > + return ret; > +} > + > +static void anx7688_i2c_remove(struct i2c_client *client) > +{ > + struct anx7688 *anx7688 = i2c_get_clientdata(client); > + > + mutex_lock(&anx7688->lock); > + > + power_supply_unreg_notifier(&anx7688->vbus_in_nb); > + > + del_timer_sync(&anx7688->work_timer); > + > + cancel_delayed_work_sync(&anx7688->work); > + > + if (test_bit(ANX7688_F_CONNECTED, anx7688->flags)) > + anx7688_disconnect(anx7688); > + > + typec_unregister_partner(anx7688->partner); > + typec_unregister_port(anx7688->port); > + usb_role_switch_put(anx7688->role_sw); > + > + regulator_bulk_disable(ANX7688_NUM_ALWAYS_ON_SUPPLIES, > anx7688->supplies); > + i2c_unregister_device(anx7688->client_tcpc); > + > + debugfs_remove(anx7688->debug_root); > + > + mutex_unlock(&anx7688->lock); > +} > + > +static int __maybe_unused anx7688_suspend(struct device *dev) > +{ > + struct anx7688 *anx7688 = i2c_get_clientdata(to_i2c_client(dev)); > + > + del_timer_sync(&anx7688->work_timer); > + cancel_delayed_work_sync(&anx7688->work); > + > + regulator_disable(anx7688->supplies[ANX7688_I2C_INDEX].consumer); > + > + return 0; > +} > + > +static int __maybe_unused anx7688_resume(struct device *dev) > +{ > + struct anx7688 *anx7688 = i2c_get_clientdata(to_i2c_client(dev)); > + int ret; > + > + ret = regulator_enable(anx7688->supplies[ANX7688_I2C_INDEX].consumer); > + if (ret) > + dev_warn(anx7688->dev, > + "failed to enable I2C regulator (%d)\n", ret); > + > + // check status right after resume, since it could have changed during > + // sleep > + schedule_delayed_work(&anx7688->work, msecs_to_jiffies(50)); > + mod_timer(&anx7688->work_timer, jiffies + msecs_to_jiffies(1000)); > + > + return 0; > +} > + > +static const struct dev_pm_ops anx7688_pm_ops = { > + SET_SYSTEM_SLEEP_PM_OPS(anx7688_suspend, anx7688_resume) > +}; > + > +static const struct i2c_device_id anx7688_ids[] = { > + { "anx7688", 0 }, > + { } > +}; > +MODULE_DEVICE_TABLE(i2c, anx7688_ids); > + > +static const struct of_device_id anx7688_of_match_table[] = { > + { .compatible = "analogix,anx7688" }, > + { }, > +}; > +MODULE_DEVICE_TABLE(of, anx7688_of_match_table); > + > +static struct i2c_driver anx7688_driver = { > + .driver = { > + .name = "anx7688", > + .of_match_table = anx7688_of_match_table, > + .pm = &anx7688_pm_ops, > + }, > + .probe = anx7688_i2c_probe, > + .remove = anx7688_i2c_remove, > + .id_table = anx7688_ids, > +}; > + > +module_i2c_driver(anx7688_driver); > + > +MODULE_LICENSE("GPL"); > +MODULE_AUTHOR("Martijn Braam <mart...@brixit.nl>"); > +MODULE_AUTHOR("Ondrej Jirman <m...@xff.cz>"); > +MODULE_DESCRIPTION("Analogix ANX7688 USB-C DisplayPort bridge"); > > > -- > People of Russia, stop Putin before his war on Ukraine escalates. -- heikki
